TF700401 - 1955-57 Chevrolet 265-400 Uncoated (Raw Steel) Round port shorty Patriot Headers
TF700401 - 1955-57 Chevrolet 265-400 Uncoated (Raw Steel) Round port shorty Patriot Headers
In Stock Now!
- Product #: TF700401
- CATEGORY: Headers
- BRAND: Doug's Headers
- SHIP TYPE: Oversize |
- Emissions Compliance: Non-CARB Compliant |
1955-57 Chevrolet 265-400 Uncoated (Raw Steel) Round port shorty Patriot Headers
These popular 1955-57 Chevrolet passenger car headers offer superior performance and are designed to clear most air conditioning, power brake, and power steering systems. Extra ground clearance makes "slammed" vehicles driveable and above frame rail ex haust system installation easy.
Benefits:- 1-5/8" tube
- 2-1/2" collector
- 5/16" flange thickness
- Round port
Included with each set are installation hardware, collector reducers, gaskets and instructions.
These headers are raw s teel and are uncoated for those who wish to apply their own type or color of coating. Although an uncoated hedder can be used, we recommend the use of a thermal coating or a high temperature paint (sold separately) to protect them from the elements and p rolong their life. For coated headers see Part # TF700407.
Important: Be sure to read the important Applic ation and Emission Notes listed below pertaining to each header system for correct application.
Note: Check your local or state laws before installing. Shi pped oversize.
Applications:
1955-57 265ci - 400ci Chevrolet small block:- With or Without Air Conditioning
- With or Without Power Steering
- With or Without Power Brakes
- Automatic Transmission with Column or Floor Shift
- Manual Transmission with Floor Shift
- Will not fit manual transmission with column shift
- Does not fit angle plug heads li>
- Fits with stock or 605 steering boxes, aftermarket side engine mounts and rear trans cross member
- Shorty design for maximum ground clearance
- Check motor mount position before ordering
- Will not fit if engine is locate d more than 3/4" forward for HEI firewall clearance.
- Will not fit with 168 tooth flywheels or kickout aftermarket starters
- Header is designed to fit cars using original V-8 pitman arm, not 6 cylinder pitman arm. Aftermarket pitman arm s must be same configuration as OE for proper header fit.
- Legal only for off-highway use (except in California or states that have adopted California emission standards), r acing use or for use on pre-emission-controlled motor vehicles/motor vehicle engines (pre-1974 domestic vehicles certified to California standards, pre-1974 domestic vehicles certified to federal standards and all pre-1974 foreign vehicles), per the manuf acturer's application guide.
This product fits the following vehicle applications. Click to view individual years.
Product Specifications
Shipping Dimensions- Weight: 32 Lbs
- Dimensions: 37" x 17" x 11"
- Ship Type: Oversize |
- Non-CARB Compliant: This product is not legal for street use on an emissions-controlled vehicle. It may be used on dedicated competition or pre-polution-controlled vehicles only.
1955-57 Chevrolet 265-400 Uncoated (Raw Steel) Round port shorty Patriot Headers
These popular 1955-57 Chevrolet passenger car headers offer superior performance and are designed to clear most air conditioning, power brake, and power steering systems. Extra ground clearance makes "slammed" vehicles driveable and above frame rail ex haust system installation easy.
Benefits:- 1-5/8" tube
- 2-1/2" collector
- 5/16" flange thickness
- Round port
Included with each set are installation hardware, collector reducers, gaskets and instructions.
These headers are raw s teel and are uncoated for those who wish to apply their own type or color of coating. Although an uncoated hedder can be used, we recommend the use of a thermal coating or a high temperature paint (sold separately) to protect them from the elements and p rolong their life. For coated headers see Part # TF700407.
Important: Be sure to read the important Applic ation and Emission Notes listed below pertaining to each header system for correct application.
Note: Check your local or state laws before installing. Shi pped oversize.
Applications:
1955-57 265ci - 400ci Chevrolet small block:- With or Without Air Conditioning
- With or Without Power Steering
- With or Without Power Brakes
- Automatic Transmission with Column or Floor Shift
- Manual Transmission with Floor Shift
- Will not fit manual transmission with column shift
- Does not fit angle plug heads li>
- Fits with stock or 605 steering boxes, aftermarket side engine mounts and rear trans cross member
- Shorty design for maximum ground clearance
- Check motor mount position before ordering
- Will not fit if engine is locate d more than 3/4" forward for HEI firewall clearance.
- Will not fit with 168 tooth flywheels or kickout aftermarket starters
- Header is designed to fit cars using original V-8 pitman arm, not 6 cylinder pitman arm. Aftermarket pitman arm s must be same configuration as OE for proper header fit.
- Legal only for off-highway use (except in California or states that have adopted California emission standards), r acing use or for use on pre-emission-controlled motor vehicles/motor vehicle engines (pre-1974 domestic vehicles certified to California standards, pre-1974 domestic vehicles certified to federal standards and all pre-1974 foreign vehicles), per the manuf acturer's application guide.
This product fits the following vehicle applications. Click to view individual years.
Product Specifications
Shipping Dimensions- Weight: 32 Lbs
- Dimensions: 37" x 17" x 11"
- Ship Type: Oversize |
- Non-CARB Compliant: This product is not legal for street use on an emissions-controlled vehicle. It may be used on dedicated competition or pre-polution-controlled vehicles only.