1968-80 Buick 350; High Energy 206/206 Hydraulic Flat Tappet Camshaft

These high-torque Comp Cams work very well on the street. Designed for engines with 9:1 or less compression ratio. They can be used in conjunction with most stock components, including intake manifolds, exhaust manifolds, carburetors and will not affect any vacuum or power accessories such as power brakes or steering. High Energy Cams will not affect air conditioning or your car's idle when the A/C is used. Normally, gas mileage will either remain the same or increase over a stock cam.

Made in USA

• Cam Type: High Energy; Hydraulic Flat Tappet
• RPM Range: 800-4800
• Lobe Separation: 110°
• Advertised Duration: 252 Intake / 252 Exhaust
• Duration @.050" Lift: 206 Intake / 206 Exhaust
• Valve Lift:.439 Intake /.439 Exhaust

Important:

• Valve springs must be replaced with the set recommended for the cam. The use of stock or incorrect springs could cause severe engine damage!
• Depending upon the cylinder heads that you are using, some minor machining may be necessary to fit the dual valve springs and valve stem seals to the cylinder head.

Note: Special order, must be prepaid. Non-returnable. Non-refundable. Please contact Classic Industries® by Phone, Fax or E-Mail to order this item.

Applications:
• 1973-76 Buick Regal

Emission Note: This product is NOT legal for installation on vehicles required to meet CARB standards and/or registered in California and other states following CARB standards, including NY and ME.