EDL2106 - Edelbrock Performer Plus Camshaft Set 352-428
EDL2106 - Edelbrock Performer Plus Camshaft Set 352-428
Out of Stock
- Product #: EDL2106
- CATEGORY: Camshafts
- BRAND: Edelbrock Performance Products
- SHIP TYPE: Standard |
- Emissions Compliance: Non-CARB Compliant |
Edelbrock Performer Plus Camshaft Set 352-428
This Edelbrock Performer-Plus Camshaft is designed for 352-428 Ford V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm.
The Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions.
This cam produced 410 Ft Lbs of Torque when paired with Performer 390 intake manifold and stock cylinder heads.
Made in USA
Important: Will not work in 427 side-oilers.
Specifications:- Intake duration: 194°
- Exhaust duration: 204°
- Intake lift:.460"
- Exhaust lift:.480"
- Lobe separation: 110°
- Intake Center Line: 105°
- Vacuum: 16"
Click Here For Installation Instructions
Emission Note:- Engine Swap Part: This product is intended for use on engines that have been transplanted or swapped into an uncontrolled, race or off-road vehicles, or into a PPCV - Pre-Pollution Controlled Vehicle. This product is not legal for use on pollution controlled vehicles.
- 1965 and Older, USA Manufactured, California Certified Vehicles
- 1967 and Older, USA Manufactured, Federally Certified Vehicles
- 1967 and Older, Foreign Manufactured Vehicles
This product fits the following vehicle applications. Click to view individual years.
Product Specifications
Shipping Dimensions- Weight: 16 Lbs, 3 Ozs
- Ship Type: Standard |
- Non-CARB Compliant: This product is not legal for street use on an emissions-controlled vehicle. It may be used on dedicated competition or pre-polution-controlled vehicles only.
Edelbrock Performer Plus Camshaft Set 352-428
This Edelbrock Performer-Plus Camshaft is designed for 352-428 Ford V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm.
The Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions.
This cam produced 410 Ft Lbs of Torque when paired with Performer 390 intake manifold and stock cylinder heads.
Made in USA
Important: Will not work in 427 side-oilers.
Specifications:- Intake duration: 194°
- Exhaust duration: 204°
- Intake lift:.460"
- Exhaust lift:.480"
- Lobe separation: 110°
- Intake Center Line: 105°
- Vacuum: 16"
Click Here For Installation Instructions
Emission Note:- Engine Swap Part: This product is intended for use on engines that have been transplanted or swapped into an uncontrolled, race or off-road vehicles, or into a PPCV - Pre-Pollution Controlled Vehicle. This product is not legal for use on pollution controlled vehicles.
- 1965 and Older, USA Manufactured, California Certified Vehicles
- 1967 and Older, USA Manufactured, Federally Certified Vehicles
- 1967 and Older, Foreign Manufactured Vehicles
This product fits the following vehicle applications. Click to view individual years.
Product Specifications
Shipping Dimensions- Weight: 16 Lbs, 3 Ozs
- Ship Type: Standard |
- Non-CARB Compliant: This product is not legal for street use on an emissions-controlled vehicle. It may be used on dedicated competition or pre-polution-controlled vehicles only.