EDL2182 - Edelbrock Performer Plus Ford 351W Camshaft Set
EDL2182 - Edelbrock Performer Plus Ford 351W Camshaft Set
Out of Stock
- Product #: EDL2182
- CATEGORY: Camshafts
- BRAND: Edelbrock Performance Products
- SHIP TYPE: Standard |
- Emissions Compliance: Non-CARB Compliant |
Edelbrock Performer Plus Ford 351W Camshaft Set
Edelbrock Performer-Plus camshaft is designed for small-block Ford 351W V-8 applications. This Edelbrock cam kit produced 325 ft-lbs. of torque when used with an Edelbrock intake and stock iron cylinder heads on a 351W engine.
The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s.
Made in USA
You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions.
Specifications:- Duration @.050 Intake: 204°
- Duration @.050 Exhaust: 214°
- Lift @ Valve Intake:.448"
- Lift @ Valve Exhaust:.472"
- Lobe Separation: 112°
- Intake Centerline: 107°
- Idle Vacuum @ 1000 RPM's: 15"
- Engine Swap Part: This product is intended for use on engines that have been transplanted or swapped into an uncontrolled, race or off-road vehicles, or into a PPCV - Pre-Pollution Controlled Vehicle. This product is not legal for use on pollution controlled vehicles.
- 1965 and Older, USA Manufactured, California Certified Vehicles
- 1967 and Older, USA Manufactured, Federally Certified Vehicles
This product fits the following vehicle applications. Click to view individual years.
Product Specifications
Shipping Dimensions- Weight: 15 Lbs, 3 Ozs
- Ship Type: Standard |
- Non-CARB Compliant: This product is not legal for street use on an emissions-controlled vehicle. It may be used on dedicated competition or pre-polution-controlled vehicles only.
Edelbrock Performer Plus Ford 351W Camshaft Set
Edelbrock Performer-Plus camshaft is designed for small-block Ford 351W V-8 applications. This Edelbrock cam kit produced 325 ft-lbs. of torque when used with an Edelbrock intake and stock iron cylinder heads on a 351W engine.
The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s.
Made in USA
You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions.
Specifications:- Duration @.050 Intake: 204°
- Duration @.050 Exhaust: 214°
- Lift @ Valve Intake:.448"
- Lift @ Valve Exhaust:.472"
- Lobe Separation: 112°
- Intake Centerline: 107°
- Idle Vacuum @ 1000 RPM's: 15"
- Engine Swap Part: This product is intended for use on engines that have been transplanted or swapped into an uncontrolled, race or off-road vehicles, or into a PPCV - Pre-Pollution Controlled Vehicle. This product is not legal for use on pollution controlled vehicles.
- 1965 and Older, USA Manufactured, California Certified Vehicles
- 1967 and Older, USA Manufactured, Federally Certified Vehicles
This product fits the following vehicle applications. Click to view individual years.
Product Specifications
Shipping Dimensions- Weight: 15 Lbs, 3 Ozs
- Ship Type: Standard |
- Non-CARB Compliant: This product is not legal for street use on an emissions-controlled vehicle. It may be used on dedicated competition or pre-polution-controlled vehicles only.