H300116 - Holley; GM LS3/L92; 92MM; EFI; Modular Hi-Ram Intake Manifold - Carbon Black Ceramic Coated

Holley; GM LS3/L92; 92MM; EFI; Modular Hi-Ram Intake Manifold - Carbon Black Ceramic Coated

Holley is proud to introduce select intake manifolds in their all new carbon black ceramic coating! The coating provides an aggressive yet subtle look that goes perfectly with the understated build styles that are popu lar today. Plus the coating provides the added benefits of corrosion protection, heat resistance and ease of cleaning.

This Holley GM LS3/L92 Modular Hi-Ram Intake Manifold is introduced as a cost effective alternative to fabricated sheet-metal for high-performance applications where induction system height is not limited. Coupling this Hi-Ram intake with the high flowing LS3/L92 style cylinder heads has outstanding potential for N/A and forced induction applications at a budget-minded cost.

Aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, street-rod applications and more!

• The base is designed to be modular in configuration to accept a wide range of carbureted and EFI tops and to be attractive to builders and fabricators as the foundation for custom induction systems.
• Runner length and the tapered cross-section designed to perform well for a wide range of engine configurations
• EFI fuel rails are machined for -8AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits
• Cast aluminum construction
• Intended for use on naturally aspirated or forced induction engines in the 6.0 to 7.0+ liter range, max power at 7000-8000+RPM

• Base Plenum Top Mounting Flange Height: 8.42" to the lifter valley cover flange on engine block
• Total Height with 92/102mm EFI Plenum Top: 12.32" to the lifter valley cover flange on engine block
• Port Size: 2.49" Height x 1.21" Wide
• Mounting Flange Gasket Type: Standard LS3 Molded O-Ring
• Plenum Top Gasket Type: 3/32" Round O-ring Cord
• Throttle Body Flange Location, with 92/102mm EFI Plenum Top: Height - 8.42" (from engine block lifter valley cover flange), Longitudinal Location - 3.84" (forward from engine block front flange), Angle - 25° (down from vertical)
• Runner Length: 6.50" As-Cast Runner Cross-Sectional Area - Tapered 4.25 in² to 2.77 in²

Important: Not for use on pollution controlled vehicles. See Emission Notes below.

For (PPCV) Pre-Pollution Controlled Vehicles Only: Legal for use on all vehicles that were manufactured before emissions control regulations were imposed. Check your state law before ordering.

For Racing Use Only: This product is intended for vehicles that are exclusively designated as a racing or off-road vehicle only. This product is not legal for use on vehicles that are operated on public highways. Not for use on a street-driven vehicle.

• 1965 and Older, USA Manufactured, California Certified Vehicles
• 1967 and Older, USA Manufactured, Federally Certified Vehicles

• Weight: 16 Lbs
• Freight Type: Standard

• Non-CARB Compliant: This product is not legal for street use on an emissions-controlled vehicle. It may be used on dedicated competition or pre-polution-controlled vehicles only.