H90670 - Holley; 670 CFM 4 BBL; Off Road; Truck Avenger Carburetor

H90670 - Holley; 670 CFM 4 BBL; Off Road; Truck Avenger Carburetor


In Stock Now!

MSRP: $797.99 ea
$724.99  ea


WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Holley; 670 CFM 4 BBL; Off Road; Truck Avenger Carburetor

The Off-Road Truck Avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off-road environment.

The 670 CFM Off-Road Truck Avenger is the perfect carburetor for small blocks or stock big block engines.

Features:
  • Gold Dichromate finish for extreme off road environments
  • Single feed fuel inlet for ease of installation
  • Optimized off-road calibration that works out-of-the-box
  • Factory preset electric choke for easy startups
  • Vacuum secondaries allow use on a wide variety of vehicles. Quick Change vacuum housing cap allows you to tune for performance or fuel economy (springs included)
  • Compatible with GM, Chrysler, and Ford A/T kickdown linkage. Additional parts may be required.
  • One piece off-road vent tube eliminates fuel spillover during extreme maneuvers
  • Intended for off-road/off-angle use. Unique metering block designed for flood free operation up to 40º while climbing and 30º during side hill maneuvers & "nose down" decents
  • Limited lifetime warranty - Guaranteed to be free from defects in material and workmanship for the life of the product!
  • 100% wet-flow tested by Holley technicians to assure it arrives ready to run!

Specifications:
  • Barrels: 4
  • Booster: Annular / Straight
  • CFM: 670
  • Choke: Electric
  • Finish: Dichromate Gold
  • Fuel: Gasoline
  • Fuel Inlet: Single
  • Model: 4150
  • Primary Main Jet: 68
  • Primary Power Valve: 6.5
  • Primary Pump Nozzle Size: 28
  • Secondaries: Vacuum
  • Secondary Main Jet: 89
  • Supercharged Application: No
  • Throttle Bore: 1.563"
  • Vacuum Ports: 1 timed (spark) port, 2 full, and 1 PCV port

Important: Not for use on pollution controlled vehicles. See Emission Notes below.

Emission Note 1:

    For (PPCV) Pre-Pollution Controlled Vehicles Only: Legal for use on all vehicles that were manufactured before emissions control regulations were imposed. Check your state law before ordering.

Emission Note 2:

    For Racing Use Only: This product is intended for vehicles that are exclusively designated as a racing or off-road vehicle only. This product is not legal for use on vehicles that are operated on public highways. Not for use on a street-driven vehicle.

PPCV - Pre-Pollution Controlled Vehicles Are Defined As:
  • 1965 and Older, USA Manufactured, California Certified Vehicles
  • 1967 and Older, USA Manufactured, Federally Certified Vehicles

This product fits the following vehicle applications. Click to view individual years.

Product Specifications

Shipping Dimensions
  • Weight: 14 Lbs, 10 Ozs
  • Dimensions: L: 12" x W: 12" x H: 8"
  • Ship Type: Standard |
Emissions Compliance
  • Non-CARB Compliant: This product is not legal for street use on an emissions-controlled vehicle. It may be used on dedicated competition or pre-polution-controlled vehicles only.
Product Information
Holley; 670 CFM 4 BBL; Off Road; Truck Avenger Carburetor

The Off-Road Truck Avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off-road environment.

The 670 CFM Off-Road Truck Avenger is the perfect carburetor for small blocks or stock big block engines.

Features:
  • Gold Dichromate finish for extreme off road environments
  • Single feed fuel inlet for ease of installation
  • Optimized off-road calibration that works out-of-the-box
  • Factory preset electric choke for easy startups
  • Vacuum secondaries allow use on a wide variety of vehicles. Quick Change vacuum housing cap allows you to tune for performance or fuel economy (springs included)
  • Compatible with GM, Chrysler, and Ford A/T kickdown linkage. Additional parts may be required.
  • One piece off-road vent tube eliminates fuel spillover during extreme maneuvers
  • Intended for off-road/off-angle use. Unique metering block designed for flood free operation up to 40º while climbing and 30º during side hill maneuvers & "nose down" decents
  • Limited lifetime warranty - Guaranteed to be free from defects in material and workmanship for the life of the product!
  • 100% wet-flow tested by Holley technicians to assure it arrives ready to run!

Specifications:
  • Barrels: 4
  • Booster: Annular / Straight
  • CFM: 670
  • Choke: Electric
  • Finish: Dichromate Gold
  • Fuel: Gasoline
  • Fuel Inlet: Single
  • Model: 4150
  • Primary Main Jet: 68
  • Primary Power Valve: 6.5
  • Primary Pump Nozzle Size: 28
  • Secondaries: Vacuum
  • Secondary Main Jet: 89
  • Supercharged Application: No
  • Throttle Bore: 1.563"
  • Vacuum Ports: 1 timed (spark) port, 2 full, and 1 PCV port

Important: Not for use on pollution controlled vehicles. See Emission Notes below.

Emission Note 1:

    For (PPCV) Pre-Pollution Controlled Vehicles Only: Legal for use on all vehicles that were manufactured before emissions control regulations were imposed. Check your state law before ordering.

Emission Note 2:

    For Racing Use Only: This product is intended for vehicles that are exclusively designated as a racing or off-road vehicle only. This product is not legal for use on vehicles that are operated on public highways. Not for use on a street-driven vehicle.

PPCV - Pre-Pollution Controlled Vehicles Are Defined As:
  • 1965 and Older, USA Manufactured, California Certified Vehicles
  • 1967 and Older, USA Manufactured, Federally Certified Vehicles

Vehicle Fitment

This product fits the following vehicle applications. Click to view individual years.

Specifications

Product Specifications

Shipping Dimensions
  • Weight: 14 Lbs, 10 Ozs
  • Dimensions: 12" x 12" x 8"
  • Ship Type: Standard |
Emissions Compliance
  • Non-CARB Compliant: This product is not legal for street use on an emissions-controlled vehicle. It may be used on dedicated competition or pre-polution-controlled vehicles only.


  • Product #:
  • SHIP TYPE:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

This product fits the following vehicle applications. Click to view individual years.

Shipping Dimensions