H90770 - Holley; 770 CFM 4 BBL; Off Road; Truck Avenger Carburetor

H90770 - Holley; 770 CFM 4 BBL; Off Road; Truck Avenger Carburetor


Discontinued Item,
No Longer Available



WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Holley; 770 CFM 4 BBL; Off Road; Truck Avenger Carburetor

The Off-Road Truck Avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off-road environment.

The 670 CFM Off-Road Truck Avenger is the perfect carburetor for small blocks or stock big block engines.

Features:
  • Gold Dichromate finish for extreme off road environments
  • Single feed fuel inlet for ease of installation
  • Optimized off-road calibration that works out-of-the-box
  • Factory preset electric choke for easy startups
  • Vacuum secondaries allow use on a wide variety of vehicles. Quick Change vacuum housing cap allows you to tune for performance or fuel economy (springs included)
  • Compatible with GM, Chrysler, and Ford A/T kickdown linkage. Additional parts may be required.
  • One piece off-road vent tube eliminates fuel spillover during extreme maneuvers
  • Intended for off-road/off-angle use. Unique metering block designed for flood free operation up to 40º while climbing and 30º during side hill maneuvers & "nose down" decents
  • Limited lifetime warranty - Guaranteed to be free from defects in material and workmanship for the life of the product!
  • 100% wet-flow tested by Holley technicians to assure it arrives ready to run!

Specifications:
  • Barrels: 4
  • Booster: Annular / Straight
  • CFM: 770
  • Choke: Electric
  • Finish: Dichromate Gold
  • Fuel: Gasoline
  • Fuel Inlet: Single
  • Model: 4150
  • Primary Main Jet: 74
  • Primary Power Valve: 2.5
  • Primary Pump Nozzle Size: 35
  • Secondaries: Vacuum
  • Secondary Main Jet: 99
  • Supercharged Application: No
  • Throttle Bore: 1.688"
  • Vacuum Ports: 1 timed (spark) port, 2 full, and 1 PCV port

Important: Not for use on pollution controlled vehicles. See Emission Notes below.

Emission Note 1:

    For (PPCV) Pre-Pollution Controlled Vehicles Only: Legal for use on all vehicles that were manufactured before emissions control regulations were imposed. Check your state law before ordering.

Emission Note 2:

    For Racing Use Only: This product is intended for vehicles that are exclusively designated as a racing or off-road vehicle only. This product is not legal for use on vehicles that are operated on public highways. Not for use on a street-driven vehicle.

PPCV - Pre-Pollution Controlled Vehicles Are Defined As:
  • 1965 and Older, USA Manufactured, California Certified Vehicles
  • 1967 and Older, USA Manufactured, Federally Certified Vehicles


This product is discontinued and no longer available. No fitment can be displayed at this time.

Product Specifications

Shipping Dimensions
  • Weight: 15 Lbs
  • Dimensions: L: 13" x W: 11" x H: 7"
  • Ship Type: Standard |
Emissions Compliance
  • Non-CARB Compliant: This product is not legal for street use on an emissions-controlled vehicle. It may be used on dedicated competition or pre-polution-controlled vehicles only.
Product Information
Holley; 770 CFM 4 BBL; Off Road; Truck Avenger Carburetor

The Off-Road Truck Avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off-road environment.

The 670 CFM Off-Road Truck Avenger is the perfect carburetor for small blocks or stock big block engines.

Features:
  • Gold Dichromate finish for extreme off road environments
  • Single feed fuel inlet for ease of installation
  • Optimized off-road calibration that works out-of-the-box
  • Factory preset electric choke for easy startups
  • Vacuum secondaries allow use on a wide variety of vehicles. Quick Change vacuum housing cap allows you to tune for performance or fuel economy (springs included)
  • Compatible with GM, Chrysler, and Ford A/T kickdown linkage. Additional parts may be required.
  • One piece off-road vent tube eliminates fuel spillover during extreme maneuvers
  • Intended for off-road/off-angle use. Unique metering block designed for flood free operation up to 40º while climbing and 30º during side hill maneuvers & "nose down" decents
  • Limited lifetime warranty - Guaranteed to be free from defects in material and workmanship for the life of the product!
  • 100% wet-flow tested by Holley technicians to assure it arrives ready to run!

Specifications:
  • Barrels: 4
  • Booster: Annular / Straight
  • CFM: 770
  • Choke: Electric
  • Finish: Dichromate Gold
  • Fuel: Gasoline
  • Fuel Inlet: Single
  • Model: 4150
  • Primary Main Jet: 74
  • Primary Power Valve: 2.5
  • Primary Pump Nozzle Size: 35
  • Secondaries: Vacuum
  • Secondary Main Jet: 99
  • Supercharged Application: No
  • Throttle Bore: 1.688"
  • Vacuum Ports: 1 timed (spark) port, 2 full, and 1 PCV port

Important: Not for use on pollution controlled vehicles. See Emission Notes below.

Emission Note 1:

    For (PPCV) Pre-Pollution Controlled Vehicles Only: Legal for use on all vehicles that were manufactured before emissions control regulations were imposed. Check your state law before ordering.

Emission Note 2:

    For Racing Use Only: This product is intended for vehicles that are exclusively designated as a racing or off-road vehicle only. This product is not legal for use on vehicles that are operated on public highways. Not for use on a street-driven vehicle.

PPCV - Pre-Pollution Controlled Vehicles Are Defined As:
  • 1965 and Older, USA Manufactured, California Certified Vehicles
  • 1967 and Older, USA Manufactured, Federally Certified Vehicles

Vehicle Fitment


This product is discontinued and no longer available. No fitment can be displayed at this time.

Specifications

Product Specifications

Shipping Dimensions
  • Weight: 15 Lbs
  • Dimensions: 13" x 11" x 7"
  • Ship Type: Standard |
Emissions Compliance
  • Non-CARB Compliant: This product is not legal for street use on an emissions-controlled vehicle. It may be used on dedicated competition or pre-polution-controlled vehicles only.


  • Product #:
  • SHIP TYPE:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

This product fits the following vehicle applications. Click to view individual years.

Shipping Dimensions