1930 Cadillac 353 OER

A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...

Reproduction set of the original 2-1/2" flat blade carburetor fuel bowl screws for Holley carburetors. These special screws are specifically designed in the correct original configuration with the proper head design for the...

OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...

OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Tough and dependable, this primer adheres...

A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...

Reproduction of the original AC 212CW air filter element that installs on a wide variety of 14" diameter open element or closed element air cleaners, cowl induction air cleaners, and 1970-72 dual snorkel air cleaners. This...

Make your wheels look like they just rolled out of the factory with this spray wheel coating. This eliminates the need for expensive custom paint mixing and greatly simplifies the restoration process by providing spray-gun...

Make your wheels look like they just rolled out of the factory with this spray wheel coating. This eliminates the need for expensive custom paint mixing and greatly simplifies the restoration process by providing spray-gun...

Reproduction of the original style shouldered lens screw set designed for use on various GM models including 1970-73 Camaros. Each screw is a replication of the original featuring chrome plating for corrosion resistance and...

This reproduction firewall pad fastener is designed to hold the firewall insulation pad in place on various 1955-81 General Motors models. Each fastener is manufactured from EPDM rubber replicating the original configuration...

Clay pulls out all the contaminants you cannot see, but that you can definitely feel, like industrial fallout, rail dust, and brake dust. Though these contaminants are not visible, you can tell they are there because the...

Formulated to enhance and restore faded, worn or stained surfaces, our OER® Carpet Dye molecularly bonds to carpeting and dries in minutes for a finished result that will not wear off . A great product for restoring...

OER® Classic Blend Engine Paint is produced to match factory paint color as closely as possible and offers excellent paint coverage and adhesion even on difficult to paint surfaces. Ideal for applications including: Air...

OER® Classic Blend Engine Paint is produced to match factory paint color as closely as possible and offers excellent paint coverage and adhesion even on difficult to paint surfaces. Comes in a 16 Oz. Aerosol Can (Net Wt....

OER® Hi-Temp Exhaust Coat is a fast drying coating designed to withstand temperatures of up to 1200° F on a continuous basis. After curing, it forms a porcelain-like bond. Its special formula resists blistering,...

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz. Self...

A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Comes in a...

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz....

A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...

Universal fuel tank sending unit for various GM and other models that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm gauges, each sending unit includes the sender, float, float rod, hardware,...

A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...

Black and gray spatter paint to cover the trunk area in your vehicle. After years of use your trunk area is probably in poor condition due to water damage or other factors. If you are replacing your trunk pan then spraying...

OER® reproduction of the ventilator used by GM on a multitude of applications from the 1950s thru todays cars and trucks including the rear axle housing, automatic transmissions. front transfer case on 4 x 4 models and...

A superior professional grade primer formulated with 40% solids to provide twice the coverage of conventional aerosol primers. One 20 oz. can will cover as much area as four 16 oz. cans of a conventional low solids...

OER® Underhood Detail Paint is a durable underhood coating used for detailing underhood items like hood hinges, safety and hood latch assembly, carburetors, pulleys, accelerator and transmission linkage, nuts, bolts,...

OER's® revolutionary formula provides 40% more coverage than standard dyes and lacquers, and actually penetrates and molecularly bonds to the surface to permanently seal in the color. Dries to the touch in 45 seconds,...

Universal fuel tank sending unit for various GM and other models that require a 30 ohm sender. Designed for use with OE or aftermarket 0-30 ohm gauges, each sending unit includes the sender, float, float rod, hardware, instructions, and seal. Since fuel tank senders only read resistance-to-ground, this sender will work on all 6-24 volt systems with positive or negative ground. Sender does NOT have a pickup tube built into it like original senders do. Will work with most aftermarket fuel tanks from 6" to 24" deep by cutting the float rod to the length required by using the supplied instruction sheet. Refer to guide below for additional information about fuel sending units. Senders will only work on applications where the sending unit is mounted in the top of the tank. Specifications: Uses standard 5-bolt GM bolt pattern Does NOT have fuel pickup tube Resistance 0-30 Ohms: Empty-Full For use with gravity feed tanks For use with FI tanks that use submersible fuel pump Adjustable float rod {fitment}  How do I test my fuel sender? A fuel sender can be bench tested with a multimeter. With the multimeter set to the O setting put the red probe on the post that is the gauge lead and put the black probe on the ground post or on the body of the fuel sender. Record your readings with the fuel sender in the empty position and in the full position. Those two numbers will tell you the ohm range is of your sender. Fuel Sender Working Backwards? Why does my gauge read backwards? The first step would be to make sure that you have the proper ohm range fuel sender to match your gauges. For example a 73-10 ohm fuel sender would read backwards on a 0-30 ohm fuel gauge. If you find you have the correct ohm range fuel sender make sure that the float arm is installed on the correct side. The front of the rheostat shows which side the float should stick out from. If the float arm is installed on the other side the gauge will read backwards. Also if the rheostat is installed upside down the gauge will read backwards. My sender isn't working. I took my sender apart and now it doesn't work, what do I do? If you have disassembled your sender unit, and now it won't read correctly, check the following: 1.) Make sure that the bracket is in full contact with the flange. There should be full continuity between the metal strip between the rheostat and the bracket and the bracket and the flange. 2.) Make sure that the center gauge lead post is isolated from the flange and bracket. If that post is grounding out you will only see zero ohms on a gauge or multimeter.

A durable low gloss coating that provides a factory fresh appearance on the frame, transmission crossmember, leaf spring shackles, control arms, firewall, cowl, brake components, AC compressor or anywhere else a low gloss,...

OER reproduction of the interior door panel clip retainers designed for use on various GM models including 1967-81 Camaro and Firebird models. These injection molded rubber plugs are inserted into the door shell to secure the...

Universal fit Casco type cigarette lighter assembly designed for a variety of models. Includes a vintage style reproduction knob and a 7/8" Casco style element. Designed as a universal fit item. Will fit virtually any Casco...

Why leave your top boot in the trunk exposed when you can keep it safe and clean by safely storing it in this special top boot storage bag. The storage bag will help protect your vehicles top boot while being stored in the...

OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel. This specially formulated primer is chromate-free and chemically bonds with iron, steel and aluminum to form...

OER® Secret Formula Wheel Wax is formulated to safely and effortlessly clean, shine, protect and prolong all types of wheels and wheel finishes. Clean, polish, shine, protect and prolong in one easy step. Extremely easy...

OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Comes in a 20 Oz. Aerosol Can (Net Wt. 15...

Reproduction shouldered lens screw set, chrome-plated stainless steel for superior corrosion resistance and outstanding appearance. Replacement lens screws used on various GM vehicles. Most 1965 and later GM vehicles used...

Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 12 piece speed nut set is...

Ever wonder where all your pens go? Why not stock up on this eye catching inexpensive OER® black and yellow retractable pen.

Display your Mopar pride in your home, garage, or office with these pub table & counter stool sets. The pub table is 42" tall with a 30" diameter surface on chrome steel cross base with foot rest paired with two 30" tall...

Black 100% cotton T-shirt with yellow silk screened trademark OER® logo.

Reproduction of the original shouldered lens screw set designed for use on various GM applications. Each screw is chrome-plated for corrosion resistance for an outstanding appearance. 4 piece set. ; #8-32 x 11/16" ; with 3/8"...

OER® Rust Converter instantly neutralizes rust and converts the rusted surface to a dark, protective polymeric coating. The inert coating provides an excellent primer base that seals out moisture to prevent future rust...

Formulated to enhance and restore faded, worn or stained surfaces, our OER® Carpet Dye molecularly bonds to carpeting and dries in minutes for a finished result that will not wear off . A great product for restoring...

OER® Metal Mimic FX high performance coatings were developed to mimic the appearance of bare metal so that you can refinish and protect all of the components that were originally left unpainted by the factory. Items can...

OER® thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a...

Reproduction of the original steering coupling joint designed for use with a variety of AMC, GM, Chrysler, Dodge, Plymouth, and Ford models as listed. This coupler (rag joint) is required to connect the steering column to the...

Clay pulls out all the contaminants you cannot see, but that you can definitely feel, like industrial fallout, rail dust, and brake dust. Though these contaminants are not visible, you can tell they are there because the...

Top Secret is a complete system for the care of canvas tops. In the first step, our incredible secret formula cleaner targets soil and dirt from, bird droppings, tree leaves, light stains from organic material and other...

12mm-1.5 thread lug nuts with external thread provision for plastic screw-on cap. Designed for Pontiac Firebird GTA and other factory style aluminum wheels. The lug nut will work with nearly all GM aluminum wheels including...

This foam insulator will keep your 12 oz. beverage can cold or your coffee hot for hours! The insulator displays the OER® logo on one side and is microwave and dishwasher safe.

This unique formula quickly penetrates rubber trim and tires to hydrate and provide lasting protection. Simply wipe on using a pad and TNT gel restores the look of faded tires, trim, bumpers, seals and weatherstrip. What's...

OER® Hi-Temp Exhaust Coat is a fast drying coating designed to withstand temperatures of up to 1200° F on a continuous basis. After curing, it forms a porcelain-like bond. Its special formula resists blistering,...

This extremely flat non-glare finish that is perfect for a variety of uses including items like hood hinges, latches, carburetor parts, seat adjusters, pulleys, linkage, nuts, bolts, washers, screws, clips, brackets and...

Restore the trunk area back to a factory original appearance with this OER® Trunk Refinishing Kit that contains practically everything you need to refinish the trunk of your classic vehicle. Kit Includes: 2 - 20 oz....

Set of 60 hog rings comes in this set. Enough hog rings to install a complete set of upholstery for front and rear seats. Note: For a Hog ring kit with deluxe installation pliers, see part # K10010 You are assured that...

If you're going to remove the inner door panel or the window handle for repair or replacement, we recommend having this handy removal tool. Removing the door and window handles requires the expansion of the inner spring clip....

This eye catching pin will look right at home on your favorite hat, shirt or jacket. It features the famous OER® logo printed on a quality all metal, epoxy coated pin and each pin includes a metal retainer.

This highly functional mouse pad, molded in thin material, adds the finishing touch to any computer work station. Features the OER® web address and logo so they are right at hand when you need them.

Glaze is a polish without any cleaning properties. Glazes are used primarily to improve the shine brilliance and clarity of paint. OER Acryli-Shine Glaze Resolution Sealing Wax is a unique and luxurious lotion-like wax...

OER® Factory Black coatings are available in 4 sheen levels to help you achieve the correct factory look for your restoration. Our Ultra-flat sheen is an extremely flat, non-glare finish. The next level up is our low gloss...

Reproduction of the original door lock bellcrank retainer designed for use with various 1969-81 Chevrolet, Buick, Pontiacm and Oldsmobile models as listed below. Manufactured in injection molded white nylon material matching...