and Performance Parts and Accessories

1936 DeSoto All Models Lokar Performance Products - Fuel System
Lokar Performance Products offers custom, show-quality shifters, shift knobs, throttle assemblies, pedals, pedal pads, brackets, cables, kickdowns, and dipsticks for street rods and classic cruisers. Lokar has everything you need to make your hot rod unique, all built in the USA with unrelenting quality and timeless style.

-
Pedal floor spacers are recommended when installing the pedal on vehicles with thick carpet or under carpet padding. Made in USA


-
Lokar Duo-Pak throttle cable sets will easily adapt to most gas pedals and throttle assemblies. Cable comes equipped with aluminum fittings and aluminum ferrules to eliminate fraying and feature a "U-Cut-to-Fit" outer housing...


-
Chromed steel brake pedal pad is designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA


-
The Lokar Billet Aluminum Throttle/Kickdown Cable Mounting Bracket for Street Demon™ Carburetors is CNC machined from 6061-T6 billet aluminum. It provides easy installation of Lokar?s Throttle and Kickdown Cables. Made...


-
Lokar Duo-Pak throttle cable set will easily adapt to most gas pedals and throttle assemblies. Cable comes equipped with aluminum fittings and aluminum ferrules to eliminate fraying and feature a "U-Cut-to-Fit" outer housing...


-
This Lokar billet aluminum drive-by-wire electronic throttle control assembly is preprogrammed specifically for Ford Coyote 5.0L crate engines and will accept both factory and aftermarket wiring harnesses. Made in USA ...


-
The first spring loaded pedals in the industry! This chromed steel throttle assembly is spring loaded like the OE design, and features a removable, splined lower arm for versatile mounting to the right or left of the bracket...


-
This stainless steel bracket and spring set mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and in-line dual quads. Bracket is used to mount Lokar?s throttle cable and kickdown assemblies. This design provides...


-
Pedal floor spacers are recommended when installing on vehicles with thick carpet or carpet padding. Made in USA


-
Pedal floor spacers are recommended when installing on vehicles with thick carpet or carpet padding. Made in USA


-
Lokar billet aluminum carburetor bracket and return spring kit for Edelbrock Carburetors. It attaches to both rear carb bolts to eliminate movement and ease the installation of Lokar?s throttle and kick down cables. Made in...


-
Lokar billet aluminum carburetor bracket and return spring kit for Edelbrock Carburetors. It attaches to both rear carb bolts to eliminate movement and ease the installation of Lokar?s throttle and kick down cables. Made in...


-
Intended for street applications, this 4 hole plenum style kit includes throttle cable and transmission kickdown cable provisions. Works with Lokar throttle and kickdown cables. Includes stainless steel return springs with...


-
This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...


-
Lokar Duo-Pak throttle cable set will easily adapt to most gas pedals and throttle assemblies. Cable comes equipped with aluminum fittings and aluminum ferrules to eliminate fraying and feature a "U-Cut-to-Fit" outer housing...


-
This black stainless steel bracket mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and in-line dual quads. Bracket is used to mount Lokar?s throttle cable and kickdown assemblies. Th is design provides improved...


-
Lokar Billet Aluminum Throttle Assembly with Standard 1-1/2" x 4" Pedal Pad and a Ball Milled Finish
This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...


-
Lokar Vintage Series universal throttle cables for carbureted applications. This cut-to-fit cable features vintage inspired braided cloth jackets covering Lokar?s specially extruded liners and stainless steel cabling. Made...


-
Lokar direct fit pedal pads for use with Lokar?s drive-by-wire throttle control assembly. The standard model measures 4" x 1-1/2" and the XL model measures 5" x 2". Both sizes are available in brushed and black finishes to...


-
Lokar direct fit pedal pads for use with Lokar?s drive-by-wire throttle control assembly. The standard model measures 4" x 1-1/2" and the XL model measures 5" x 2". Both sizes are available in brushed and black finishes to...


-
Intended for street applications, this 4 hole plenum style kit includes throttle cable and transmission kickdown cable provisions. Works with Lokar throttle and kickdown cables. Includes stainless steel return springs with...


-
This Lokar Hi-Tech "U-Cut-to-Fit" outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative clevis cable ends to eliminate the...


-
This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...


-
Black stainless steel GM designed dual springs for use with Lokars SR4004 bracket (sold separately). Made in USA


-
This Lokar Hi-Tech "U-Cut-to-Fit" polished stainless steel outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative clevis...


-
Pedal floor spacers are recommended when installing the pedal on vehicles with thick carpet or under carpet padding. Made in USA


-
Gleaming polish not your style? Then take a look at this stealthy black anodized billet spring-loaded throttle assembly that features a removable lower arm and is splined for versatile mounting to either the right or left...


-
This Lokar Hi-Tech "U-Cut-to-Fit" black polished stainless steel outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative...


-
This stainless steel bracket mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and in-line dual quads. Bracket is used to mount Lokar?s throttle cable and kickdown assemblies. This design provides improved...


-
Lokar Vintage Series universal throttle cables for carbureted applications. This cut-to-fit cable features vintage inspired braided cloth jackets covering Lokar?s specially extruded liners and stainless steel cabling. Made...


-
This Lokar billet aluminum drive-by-wire electronic throttle control assembly is preprogrammed specifically for Ford Coyote 5.0L crate engines and will accept both factory and aftermarket wiring harnesses. Made in USA ...


-
This Lokar Hi-Tech "U-Cut-to-Fit" outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative clevis cable ends to eliminate the...


-
This Lokar Hi-Tech "U-Cut-to-Fit" outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative clevis cable ends to eliminate the...


-
This Lokar Hi-Tech "U-Cut-to-Fit" outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative clevis cable ends to eliminate the...


-
This Lokar Hi-Tech "U-Cut-to-Fit" outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative clevis cable ends to eliminate the...


-
These stainless steel mounting brackets are designed to properly mount Lokar throttle and or kickdown cables on to today's most popular EFI intake systems. Lokar brackets are intended for use with Lokar cables only.


-
This Lokar Hi-Tech "U-Cut-to-Fit" outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative clevis cable ends to eliminate the...


-
This Lokar Hi-Tech "U-Cut-to-Fit" outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative clevis cable ends to eliminate the...


-
This black stainless steel bracket mounts to rear of Holley, Edelbrock, AFB, Quadrajet, Demon, and in-line dual quads. Bracket is used to mount Lokar?s throttle cable and kickdown assemblies. Th is design provides improved...


-
This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...


-
Lokar Duo-Pak throttle cable set will easily adapt to most gas pedals and throttle assemblies. Cable comes equipped with aluminum fittings and aluminum ferrules to eliminate fraying and feature a "U-Cut-to-Fit" outer housing...


-
Stainless steel GM designed dual springs for use with Lokars SR4001 bracket (sold separately). Made in USA


-
The first spring loaded pedals in the industry! This chromed steel throttle assembly is spring loaded like the OE design, and features a removable, splined lower arm for versatile mounting to the right or left of the bracket...


-
This Lokar Hi-Tech "U-Cut-to-Fit" black polished stainless steel outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative...


-
This Lokar Hi-Tech "U-Cut-to-Fit" polished stainless steel outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative clevis...


-
This Lokar Hi-Tech "U-Cut-to-Fit" black polished stainless steel outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative...


-
This Lokar Hi-Tech "U-Cut-to-Fit" outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative clevis cable ends to eliminate the...


-
Lokar Vintage Series universal throttle cables for carbureted applications. This cut-to-fit cable features vintage inspired braided cloth jackets covering Lokar?s specially extruded liners and stainless steel cabling. Made...


-
Lokar Duo-Pak throttle cable set will easily adapt to most gas pedals and throttle assemblies. Cable comes equipped with aluminum fittings and aluminum ferrules to eliminate fraying and feature a "U-Cut-to-Fit" outer housing...


-
The Lokar Billet Aluminum Throttle/Kickdown Cable Mounting Bracket for Street Demon™ Carburetors is CNC machined from 6061-T6 billet aluminum. It provides easy installation of Lokar?s Throttle and Kickdown Cables. Made...


-
Lokar direct fit pedal pads for use with Lokar?s drive-by-wire throttle control assembly. The standard model measures 4" x 1-1/2" and the XL model measures 5" x 2". Both sizes are available in brushed and black finishes to...


-
This Lokar Hi-Tech "U-Cut-to-Fit" outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative clevis cable ends to eliminate the...


-
This Lokar Hi-Tech "U-Cut-to-Fit" outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative clevis cable ends to eliminate the...


-
This Lokar Hi-Tech "U-Cut-to-Fit" polished stainless steel outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative clevis...


-
Lokar Vintage Series universal throttle cables for carbureted applications. This cut-to-fit cable features vintage inspired braided cloth jackets covering Lokar?s specially extruded liners and stainless steel cabling. Made...


-
Lokar direct fit pedal pads for use with Lokar?s drive-by-wire throttle control assembly. The standard model measures 4" x 1-1/2" and the XL model measures 5" x 2". Both sizes are available in brushed and black finishes to...


-
Lokar Vintage Series universal throttle cables for carbureted applications. This cut-to-fit cable features vintage inspired braided cloth jackets covering Lokar?s specially extruded liners and stainless steel cabling. Made...


-
Lokar Vintage Series universal throttle cables for carbureted applications. This cut-to-fit cable features vintage inspired braided cloth jackets covering Lokar?s specially extruded liners and stainless steel cabling. Made...


-
Lokar Duo-Pak throttle cable set will easily adapt to most gas pedals and throttle assemblies. Cable comes equipped with aluminum fittings and aluminum ferrules to eliminate fraying and feature a "U-Cut-to-Fit" outer housing...


-
Gleaming polish not your style? Then take a look at this stealthy black anodized billet spring-loaded throttle assembly that features a removable lower arm and is splined for versatile mounting to either the right or left...

- Brakes
-
Brakes
- Parking Brake Pa…(14)
- Pedal Components (9)
- Fuel System
-
Fuel System
- Accelerator Comp…(20)
- Carburetor Compo…(40)
- Fuel Injection (1)
- Transmission
-
Transmission
- Automatic Trans (3)
- Manual Trans (37)
- Speedometer Parts (2)
America's First Choice in Restoration and Performance Parts and Accessories