1941 Chevrolet All Models Parts

OER® Authorized reproduction drop head mirror for early models Cars and trucks. Early style drop head mirror mount to top edge of door frame. Features a chrome arm with a 3 inch mirror head. Fits sedan and truck closed...

OER® Authorized reproduction drop head mirror for early models Cars and trucks. Early style drop head mirror mount to top edge of door frame. Features a chrome arm with a 4 inch mirror head. Fits sedan and truck closed...

For a properly functioning console/glove box lock, replace your broken or missing lock case with this OER® replacement for various GM models. Does not include cylinder. Applications: 1940-57 Chevrolet Cars - Glove Box...

Reproduction of the original headlamp mounting bucket designed for use on various GM models. This headlight bucket keeps the headlamp beam in position once installed. The headlamp bucket attaches to the headlamp housing using...

Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering.

OER® reproduction of the original bumper bolt, washer and nut designed for use on 1947-72 Chevrolet/GMC trucks and 1938-54 Chevrolet passenger cars. Set features the correct chrome-plated carriage bolt with authentic style...

OER® reproduction of the original bumper bolt, washer and nut designed for use on 1947-72 Chevrolet/GMC trucks and 1938-54 Chevrolet passenger cars. Set features the correct chrome-plated carriage bolt with authentic style...

Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering.

Reproduction windshield wiper blade for 1947-53 Chevrolet and GMC trucks with claw-style or slotted connector. Also will fit a wide variety of other makes and models as listed. This polished stainless steel arm is designed to...

Reproduction windshield wiper blade for 1947-53 Chevrolet and GMC trucks with claw-style or slotted connector. Also will fit a wide variety of other makes and models as listed. This polished stainless steel arm is designed to...

Add vintage style to your Chevrolet and protect your paint at the same time with this stainless steel exhaust deflector. Exhaust deflectors clamp on the tailpipe to deflect the exhaust downward, preventing the exhaust from...

OER® reproduction bumper bolt, washer, nut for 1947-72 Chevrolet/GMC trucks and 1938-54 Chevrolet passenger cars. Each 4-piece set features the correct chrome-plated carriage bolt with authentic style tall "Domed Head". ...

Add vintage style to your Chevrolet and protect your paint at the same time with this stainless steel exhaust deflector. Exhaust deflectors clamp on the tailpipe to deflect the exhaust downward, preventing the exhaust from...

This decal was originally installed on all 1941-55 models. Add it back to your classic and make your truck look original again. Made in USA Note: Always be sure to clean the surface before applying the decal. ...

Reproduction radiator over flow tank set. Manufactured in heavy gauge steel and finished in the correct semi-gloss charcoal color as original. Kit includes: Tank Decals Hose Hardware Instructions Chevrolet / GMC Truck...

Replacement 6-volt #1154 bulb for a variety of applications. Choose the correct bulb by matching the number on the base of your original bulb. Individual applications may vary depending on vehicle model and year. For a...

Reproduction of the tail lamp brackets for 1940-53 Chevrolet pick ups. Reproduction of the tail lamp brackets for 1940-53 Chevrolet pick ups. Fits right hand (passenger) side.

Replacement 6-volt #82 bulb for a variety of applications. Choose the correct bulb by matching the number on the base of your original bulb. Individual applications may vary depending on vehicle model and year. For a complete...

Replacement 6-volt #55 bulb for a variety of applications. Choose the correct bulb by matching the number on the base of your original bulb. Individual applications may vary depending on vehicle model and year. For a complete...

Reproduction of the tail lamp bracket for 1940-53 Chevrolet pickups. Fits left hand (driver) side.

Reproduction of the tail lamp brackets for 1940-53 Chevrolet pick ups. Fits left hand (driver) side.

Replacement 6-volt #1129 bulb for a variety of applications. Choose the correct bulb by matching the number on the base of your original bulb. Individual applications may vary depending on vehicle model and year. For a...

Replacement 6-volt #63 bulb for a variety of applications. Choose the correct bulb by matching the number on the base of your original bulb. Individual applications may vary depending on vehicle model and year. For a complete...

Replacement 6-volt #51 bulb for a variety of applications. Choose the correct bulb by matching the number on the base of your original bulb. Individual applications may vary depending on vehicle model and year. For a complete...

Reproduction glove box lock gasket for 1941-54 models. Replace your old one with a new reproduction to protect that new paint.

Reproduction of the tail lamp brackets for 1940-53 Chevrolet pick ups. Fits right hand (passenger) side.

1936-46 Steering Column Clamp Pads: Reproduction of the original steering column clamp pads used as a cushion between the steering column clamp bracket and the steering column.

This early edition of the washer lid decal is reproduced to exact specifications. For use with Trico washer systems. Made in USA Note: Always be sure to clean the surface before applying the decal.

Centric wheel cylinders match the design of your vehicle?s original equipment. They are built for long service life and feature the highest quality components for superior resistance to heat, corrosion and leakage. These...

Correct reproduction rubber bumper for various GM applications. Fits: 1937-1957 GM full size door bumper, single prong style, front or rear. 1962-64 full size and 1964-72 El Camino gas filler door. Keeps the door from...

Complete tail lamp assembly includes a die-cast chrome bezel and housing. Correct lens with socket and wiring for easy installation on your early model Stepside pickup. Fits right hand (passenger) side.

1937-54 Speedometer Cable Firewall Grommet: Protect your speedometer cable and seal out engine compartment fumes with the correct speedometer cable rubber grommet.

Reproduction tail lamp assembly with an LED circuit board to give your Chevrolet or GMC truck an original but brighter look. The tail lamp comes equipped with 45 super bright LEDs. Fits left hand (driver) side. ...

Reproduction tail lamp assembly with an LED circuit board to give your Chevrolet or GMC truck an original but brighter look. The tail lamp comes equipped with 45 super bright LEDs. Fits right hand (passenger) side. ...

This reproduction style tail lamp lens is fitted with super bright LEDs, offering your truck modern lighting with an original look. Each tail lamp is fully sealed and weather resistant. Plugs into the stock bulb socket. For...

1937-59 Main Harness Firewall Grommet: Protect your wiring and seal out engine compartment fumes with the correct wire harness rubber grommet.

1937-59 Main Harness Firewall Grommet: Protect your wiring and seal out engine compartment fumes with the correct wire harness rubber grommet.

OER® stamped steel headlamp retaining ring designed to hold the sealed beam into the mounting bucket. Triple chrome plating protects against corrosion while providing a brilliant shine. May slightly differ cosmetically...

Excellent reproduction of the original chrome tail light bezel for 1940-53 pickups. Replace your damaged or missing originals with this beautiful reproduction. Sold individually. Fits left hand (driver side) or right hand...

Correct replacement of the original gasket which is used between the sending unit and the locking ring. This part wears out and replacing the gasket is recommended whenever replacing the fuel sending unit.

Due to excessive heat and electrical loads, the horn relay may become inoperative, leaving your vehicle without the use of a horn. Replace the burnt-out horn relay with this fine reproduction and bring your horn back to...

Reproduction license lamp with LED circuit board to give your Chevrolet or GMC stepside brighter illumination with an original look. This license plate lens for 1940-53 models features 6 super-bright LEDs and fully sealed,...

Reproduction tail lamp assembly with an LED circuit board to give your Chevrolet or GMC truck an original but brighter look. The tail lamp comes equipped with 45 super bright LEDs. Fits left hand (driver) side. ...

Protect your bulb and inner housing from the elements and ensure a proper fit with a new license lens gasket.

Protect your bulb and inner housing from the elements and ensure a proper fit with a new license lens gasket.

Reproduction of the original license lamp lens for 1940-53 trucks. This reproduction is manufactured to exact specifications and will replace the original lens exactly.

This 6-volt tail lamp assembly includes a die-cast chrome bezel and housing. Correct lens with socket and wiring for easy installation on your early model Stepside pickup. Wire sleeve is not included. Fits left hand...

Reproduction of the tail light lens for 1940-53 trucks. Replace your damaged or missing original with this outstanding reproduction. Sold individually. Fits left hand (driver side) or right hand (passenger side).

This reproduction locking gas cap looks just like the caps produced by General Motors until the late 1940's. Made from chromed steel with "GM" embossed stainless steel key hole cover and two "GM" embossed keys as original.

Reproduction brake return springs fit 1936-50 1/2 ton pickups.

These new carburetor insulators for 216 ci inline 6 cylinder engines install between the carburetor and intake manifold.

1941-46 Hood Bumper Set: Hood bumpers reduce rattling and help to keep your hood in proper alignment.

Reproduction of the tail light lens for 1940-53 trucks. Replace your damaged or missing original with this outstanding reproduction. Sold individually. Fits left hand (driver side) or right hand (passenger side).

This OER® manufactured tool is designed to easily remove the guide plate nut on door or quarter window glass. Fits most models 1968-77. Note: Nut not included.

OER® speed nut for use with various original and reproduction emblem mounting studs. Includes pliable sealant type gasket attached to nut. Speed nuts can be utilized for many of the emblems that do not include attaching...

This quality upholstery installation kit includes 60 hog rings and professional style heavy duty pliers. Total of 60 hog rings come in each kit to be applied as needed, more hog rings are available for purchase separately but...

High quality reinforced, brushed twill cap in black. It proudly displays an embroidered bright yellow and black OER® logo on the front and side. Features a fully adjustable cotton strap with silver buckle and matching silver...

OER® speed nut for use with various original and reproduction emblem mounting studs. Includes pliable sealant type gasket attached to nut. Speed nuts can be utilized for many of the emblems that do not include attaching...

This soft key tag is made of a sturdy material that is thick yet pliable, and comes with a spiral key ring.

OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...