1948 Ford F4 Parts

Reproduction tail light lens gasket set for Ford shield style tail lamps. Shield style tail lights can be fitted to most FlareSide F100, F250, and F350 Pickup Trucks. These gaskets will seal the tail light housing from the...

Reproduction license plate light lens for 1948-66 Ford F-Series trucks with Shield-Type tail light lenses. Applications include F100, F250, and F350 pickups. This clear lens mounts on the bottom of the driver side tail lamp...

Reproduction windshield wiper blade for 1947-53 Chevrolet and GMC trucks with claw-style or slotted connector. Also will fit a wide variety of other makes and models as listed. This polished stainless steel arm is designed to...

Replacement style gas cap designed to replace the original gas cap for the listings below. Each gas cap is manufactured to fit the fuel neck properly. This service replacement fuel cap from Stant may differ slightly from the...

Reproduction passenger side vent window handle for 1948-50 F1, F2, F3, and F4 Pickup Trucks. Each vent window handle is accurately reproduced to match the original. Manufactured in zinc die-cast metal featuring a bright...

This engine paint set has almost everything you need to do a superior job when you paint your engine, and even includes the step-by-step instructions needed to help you do it right. Motor Coater is easy to apply, offers...

Billet aluminum speedometer gauge adapter ring for 1951-52 F-Series Pickup Truck. This solid billet dash ring is manufactured from CNC machined, polished aluminum and features a ball milled face. {fitment} This is a show...

Reproduction driver side vent window handle for 1948-50 F1, F2, F3, and F4 Pickup Trucks. Each vent window handle is accurately reproduced to match the original. Manufactured in zinc die-cast metal featuring a bright chrome...

Reproduction of the original style park light lens designed for use with 1948-50 Ford F1, F2, F3, F4 truck models. Each lens is injection molded in quality acrylic lens material replicating the old or cracked original lens....

Reproduction ash tray knob for 1948-50 Ford F1, F2, F3, and F4 model pickup trucks. These injection-molded black plastic knobs feature a tiered design with a rounded top just like the originals. They are designed as...

Reproduction ignition switch retainer dash bezel for 1948-50 Ford F1, F2, F3, and F4 Trucks. Manufactured in OEM style die-cast materials, each chrome plated bezel is correctly threaded and is a direct fit replacement for the...

Replacement passenger side inner lower door patch panel for 1948-50 Ford F1, F2, F3, and F4 pickup trucks. This stamped steel panel will fully replace the inner lower sheet metal on the right hand side door. Panels are EDP...

Glove compartment door for 1948-50 Ford pickup trucks. This door is constructed from high-grade steel and is EDP coated to prevent corrosion.

Chrome plated reproduction fuel filler neck for 1948-50 Ford F-Series trucks. Manufactured in steel and triple-chrome plated for a custom look. 14.-3/4" long. Applications: 1948-50 F1 Pickup 1948-50 F2 Pickup 1948-50 F3...

Reproduction motor mount bolt for 1932-51 Ford Flathead V8 engines. This specialized shoulder bolt entends through the frame or crossmember into the engine or tranmission mount bracket. The end in drilled to accept a cotter...

Reproduction of the original parking light assembly designed for use with 1948-50 Ford F1, F2, F3, and F4 pickup truck models. These direct replacement assemblies include a stainless bezel, clear glass lens, cork gasket, and...

Reproduction 6V ammeter gauge for 1948-50 Ford F1, F2, F3, and F4 pickup trucks. This bi-metal 6- volt gauge is an exact replica of the original. A voltage reducer is required for trucks converted to 12 volt. Replaces Ford...

Reproduction 6V tempurature gauge for 1948-50 Ford F1, F2, F3, and F4 pickup trucks. This bi-metal 6- volt gauge is an exact replica of the original. A voltage reducer is required for trucks converted to 12 volt. Replaces...

Reproduction of the original style park light lens designed for use with 1948-50 Ford F1, F2, F3, F4 truck models. Each lens is injection molded in quality acrylic lens material replicating the old or cracked original lens....

Reproduction driver side rear fender for 1948-50 Ford F1 shortbed pickup trucks. This quality steel fender will fit 1948-49 and early 1950 models with raised/offset bedsides. It is stamped from high quality heavy gauge steel...

Reproduction hood side molding trim for 1948-50 Ford F1, F2, F3, and F4 pickup trucks. These stainless strips install on either side of the hood. Sold in sets of four. Replaces OE part # 7C-16720-S. Ford Applications: ...

Replacement drum brake wheel cylinder for 1948-50 Ford F3 and F4 pickups. This direct-fit premium wheel cylinder is designed to meet or exceed original equipment in fit, function, performance, and appearance. It is pressure...

Reproduction choke knob or vent knob for 1948-50 Ford F1, F2, F3, and F4 models. Each injection-molded plastic knob is produced in black to be installed on the choke control or the heater vent control on your classic Ford...

Reproduction parklight lens gasket set various for 1948-50 Ford trucks and vans including F1, F2, F3, and F4. These quality die-cut gaskets are designed to cushion the lens and seal out dust and moisture. Sold in pairs....

Reproduction upper grill panel for 1948-50 Ford F-Series trucks. This header panel mounts above the grill where the F-O-R-D letter mount on F1, F2, F3, and F4 pickups. These panels are often damaged or rusted beyond repair....

Reproduction of the original front fender designed for use with 1948-50 Ford F1 and F2 pickup trucks. Each fender is manufactured in quality stamped steel replicating the original in every detail. The emblem holes are not...

Reproduction driver side front inner fender apron for 1948-50 F1, F2, and F3 pickups. This OE-style, 1-piece, inner fender is designed as a direct fit replacement for Ford F-Series trucks. It is constructed of high-grade...

Reproduction passenger-side front inner fender apron for 1948-50 F1, F2, and F3 pickups. This OE-style, 2-piece, inner fender is designed as a direct fit replacement for Ford F-Series trucks. It is constructed of high-grade...

Reproduction vent window bracket and shaft assembly for 1948-50 Ford F1, F2, F3, and F4 Pickup Trucks. These direct replacement brackets fit either side of the vehicle and will install just like the original using the...

Replacement driver side inner lower door patch panel for 1948-50 Ford F1, F2, F3, and F4 pickup trucks. This stamped steel panel will fully replace the inner lower sheet metal on the left hand side door. Panels are EDP coated...

Reproduction fuel filler cap for 1932-50 Ford pickup trucks and 1932-48 Ford and Mercury cars. This smooth stainless steel cap is a direct replacement is an exact replica of the original. Replaces Ford part# 11C-9030-D. Ford...

Reproduction lighter knob for 1948-50 Ford F1, F2, F3, and F4 F-Series models. Each injection-molded plastic knob is produced in the correct configuration to be installed on the lighter of your classic Ford truck. Sold...

Reproduction front fender extension for 1948-50 Ford F1 and F2 pickup trucks. This panel install on the front of the front fender between the fender and the lower valance. It is a OE-style direct fit replacement for the...

Stamped steel reproduction of the fuel filler neck for 1948-50 Ford F-Series trucks. Manufactured in steel and EDP coated for corrosion resistance. Applications: 1948-50 F1 Pickup 1948-50 F2 Pickup 1948-50 F3 Pickup 1948-50...

Reproduction hood side ornament for 1948-50 Ford F1, F2, F3, and F4 Pickup Trucks. This high-qulaity ornament features stamped stainless steel construction and includes installation hardware. Replaces Ford part# 7C-16850....

Reproduction front fender extension for 1948-50 Ford F1 and F2 pickup trucks. This panel install on the front of the front fender between the fender and the lower valance. It is a OE-style direct fit replacement for the...

8HC-14401-C

All new, reproduction stamped steel hood for most 1948-50 Ford F1, F2, F3, F4 trucks and pickups. These OE-style steel hoods provide superior strength over fiberglass and maintain the stock look and feel to the truck. It is...

Reproduction lower grill panel for 1948-50 Ford F-Series trucks. This valance mounts below the grill, behind the front bumper on F1, F2, and F3 pickups. These panels are often damaged or rusted beyond repair. This all new...

Original reproduction bi-metal gauge manufactured for use in original 6 volt trucks, must use voltage reducer if truck is converted to 12 volt. Ford Officially Licensed Product

Reproduction headlight switch knob for 1948-50 Ford F1, F2, F3, F-Series models. Each injection-molded plastic knob is produced in black to be installed on the headlight switch in your classic Ford truck. Replaces Ford #...

Reproduction heater blower switch for 1973-78 Ford F-Series truck and 1978 Bronco. This is a direct-fit replacement for F100. F250, and F350 pickups with 4 terminal heater blower switches. Replaces Ford part# D3AZ-19986-A.

Reproduction of the original front fender designed for use with 1948-50 Ford F1 and F2 pickup trucks. Each fender is manufactured in quality stamped steel replicating the original in every detail. The emblem holes are not...

Cloth Wrapped - Exact of Original 51 1/2" Long {fitment}

Reproduction front floor panel assembly with crossmember for 1948-52 Ford F1, F2, and F3 pickups. This direct replacement front floor section is manufactured from 18 gauge sheet metal specifically for F-Series trucks. The...

Reproduction upper motor mount washer for 1932-51 Ford Flathead V8 engines. This specialized washer installs between the upper engine mount insulator and the castle nut. It is installed to protect the rubber insulator from...

Replacement front lower motor mount rubber insulator for 1948-51 Ford F-Series Truck models including F1, F2, and F3 pickups. This mount installs between the engine bracket and the frame. It is to meet or exceed OEM...

w/Holley Carb; 1GA-A, 5GA-A, 7HT-A, R134-7, R484, -1

Reproduction door latch striker plate for 1948-52 Ford F1, F2, F3, and F4 Pickup Trucks. This direct replacement assembly installs on the the door post on either side of the vehicle. Replaces Ford part# 7C-8122010. Sold each....

Replacement style starter relay solenoid switch for 1946-51 Ford and Mercury cars and trucks. Replaces Ford part # 21A-11450. {fitment}

Reproduction of the original rear bumper brackets designed for use with 1948-72 Ford F100. F250, and F350 FlareSide (Stepside) pickup truck models. Each bracket is manufactured in stamped steel to correct factory dimensions...

Reproduction passenger side window regulator for 1948-52 Ford F100, F250, and F350 Pickup Trucks. This direct replacement regulator will install in the stock location using the original hardware. Replaces Ford part#...

Cloth Wrapped - Exact of Original 110 1/2" Long {fitment}

Replacement rubber front upper motor mount for many 1948-51 Ford F-Series Truck models including F1, F2, and F3 pickups. This mount installs between the engine bracket and the frame. It is to meet or exceed OEM specifications...

Applications: 1941-47 1/2 Ton Pickup 1941-47 3/4 Ton Pickup 1941-47 1 Ton Pickup 1948-51 F1 1948-51 F2 1948-51 F3 1948-51 F4 1937-50 Ford Passenger 1939-49 Mercury Passenger

Applications: 1940-47 1/2 Ton Pickup 1940-47 3/4 Ton Pickup 1940-47 1 Ton Pickup 1948-51 F1 1948-51 F2 1948-51 F3 1948-51 F4

Reproduction 4-piece beltline weatherstrip set for 1953-55 Ford F1, F2, F3, and F4 Pickup Trucks. This window felt set includes inner and outer "fuzzies" for both doors. Sometimes called "anti-rattlers", these felt/rubber...