1953 Oldsmobile All Models Parts

Reproduction bezel/housing for the side roof dome lamps in various GM models. This housing 5 1/4" and fits the dome lamps that mount above the side windows. Order part number 154505L for the matching lens. Each bezel/housing...

Reproduction chrome bezel for the 1-button power window switch on a variety of 1948-54 GM models. Beautifully detailed die-cast part that is chrome-plated and highly polished to perfection. Buick Applications 1949-53 All (With Hydraulic Windows) Oldsmobile Applications 1948 Ninety Eight 1949-53 All (Except 1953 Fiesta) Cadillac Applications 1948-53 All Packard Applications 1951-54 All

Hood emblem insert for all 1953 88, Super 88 and 98 models except Fiesta. This insert is five inches in diameter, and has the correct silver finish with black background and silver continents.

Rebuild the convertible top switch on your early 50's GM convertible with our convertible top switch rebuild kit. Developed for 1951-54 Buick,Oldsmobile, and 1950 cadillac convertibles Applications 1951-54 Buick Convertible...

Reproduction lens for the side roof dome lamps in various GM models. This lens measures 3 1/2" by 1 1/2" and fits the dome lamps that mount above the side windows. Order part number 154505H for the matching chrome bezel. sold...

Right outside chrome side view mirror. Passenger side, includes mounting bracket, gasket and screws. Cadillac Applications 1950-53 all models Oldsmobile Applications 1951-53 all models

These Delco-Remy tags for the starter, generator, and distributor are a must-have for the serious restorer. Set includes two red 12 volt tags and one black tag. Blank tag is ready to be stamped with your unit number. Fits a...

Rubber fuel line hose for 1950-53 8 cylinder powered Oldsmobile models. This is the hose that connects the steel fuel line on the frame rail to the fuel pump.

Ignition switch for all 1952-55 Oldsmobile 88, Super 88, 98 and Fiesta models. Replaces worn out or inoperable switches. Does not include lock cylinder or keys. Oldsmobile Applications: 1952-55 Eighty-Eight 1952-55 Deluxe 88 1952-55 Super 88 1952-55 Ninety-Eight 1953 Fiesta 1954-55 Starfire

Lower control arm pivot pin seal for all 1936-56 Oldsmobiles and 1937-56 Buicks. Four required per vehicle, sold individually.

Door latch striker to door jamb mounting screw package for 1949-53 Buick, Cadillac and Olds models. Screws with countersunk flat heads and lock washers are 1-5/16" long and have 5/16"-24 thread as original. Set of six screws...

OER® Reproduction of the original stamped steel headlamp retaining ring designed for use with various various 1941-74 GM car and truck models. Each headlight retaining ring is designed to hold the sealed beam into the...

Front wheel bearing dust cap for all 1939-56 Oldsmobiles. Sold individually.

Reproduction of the original accessory deflector in polished stainless steel. Deflector clamps to tail pipe with included hardware and can be used on any 1-1/2 inch pipe. Sold individually Buick Applications: 1935-55 all...

Light tan with dark brown printed pattern material is sold by linear yard, approximately 56 inches by 36 inches. This is the material only. It will need to be cut and sewn to fit trunk floor by an upholstery shop. Most models...

Chrome plated, stamped steel, headlight bulb retaining ring. Beautiful reproduction of the original GM item, features 3 tabs to secure the headlight bulb into the bucket. Authentic original-looking steel ring for 1940-54...

Reproduction power seat switch for a variety of 1948-53 GM models. Sold individually. Comes with beautifully detailed die-cast bezel that is chrome-plated and highly polished to perfection. Buick Applications 1948-53 All ...

Replacing the rubber door stoppers will help keep your doors aligned correctly. Fits door lock post, upper, with plated screw {fitment}

Door jamb light switch for 1953-56 88, Super 88, 98 and Fiesta models. Used on all two door cars, and on the front doors of four door models. Sold individually. Oldsmobile Applications: 1953-56 88, Super 88, 98, and Fiesta...

Neutral safety switch for 1953-55 Oldsmobile 88, Super 88, 98 and Fiesta models except 1953 cars equipped with Dynaflow transmission and 1955 models with air conditioning.

Single button power window switch assembly for right front door and rear doors or quarter panels. Switch assembly includes bezel, sold individually. Buick Applications 1949-53 All Oldsmobile Applications 1948 Ninety Eight 1949-53 All (Except 1953 Fiesta) Cadillac Applications 1948-53 All Packard Applications 1951-54 All

Left outside chrome side view mirror. Driver's side, includes mounting bracket, gasket and screws. Cadillac Applications 1951-56 all models Oldsmobile Applications 1951-53 all models

Chrome 'Oldsmobile' Letter set used on hood and trunk for all 1951-52 Oldsmobile models and on trunks of 1953 88 models. Retaining clips sold separately, order part # 559986 for the clip set.

Reproduction windshield wiper blade for 1954-55 1st Series Chevrolet and GMC trucks and 1949-54 Chevrolet Full-Size Passenger Car models and a wide array of other makes and models equipped with the wiper arm connector for...

Individual 'O L D S M O B I L E' letters for the grille bar of all 1953 Olds 88, Super 88, 98 and Fiesta models. Correct brushed finsh, set includes fasteners. Licensed and approved by General Motors. Sold as a set only.

Reproduction 1-button power window switch for a variety of 1948-54 GM models. Sold individually. Bezel is not included, but sold separately, under part # 4557793. Buick Applications 1949-53 All Oldsmobile Applications 1948 Ninety Eight 1949-53 All (Except 1953 Fiesta) Cadillac Applications 1948-53 All Packard Applications 1951-54 All

Switch retainer for 4-button power window switch on 1948-56 Buick and Oldsmobile, 1948-53 Cadillac, and 1955-55 Chevrolet and Pontiac. Buick Applications 1948-56 all models Cadillac Applications 1948-53 all models ...

Rubber horn cushion for 1953-54 Oldsmobile 88, Super 88 and 98 models equipped with Deluxe steering wheel. These cushions become brittle with age, often leading to inadvertent horn operation.

88' rocket emblem used on the driver's side of the trunk lid on 1951 Super 88 and 1952-53 88 and Super 88 models. Chrome plated with black and white highlights as original. Includes fasteners.

Four button power window switch assembly for driver's door. Complete assembly including buttons and chrome bezel. Buick Applications 1949-53 All (with hydraulic power windows) Oldsmobile Applications 1948 Ninety Eight 1949-53 All (Except 1953 Fiesta) Cadillac Applications 1948-53 All Packard Applications 1951-54 All

Reproduction 1-button power window switch for a variety of 1948-54 GM models. Sold individually. Comes with beautifully detailed die-cast bezel that is chrome-plated and highly polished to perfection. Buick Applications 1949-53 All Oldsmobile Applications 1948 Ninety Eight 1949-53 All (Except 1953 Fiesta) Cadillac Applications 1948-53 All Packard Applications 1951-54 All

Reproduction of the original radiator cap designed for use with a wide array of 1949-64 General Motors applications as listed below. Each cap is manufactured to correct factory specifications resulting in an authentic and...

Reproduction lower window stop for various 1941-55 Chevrolet models. 1-5/16" square x 1/2" thick for 1955 convertible and hardtop. Replaces OE number 4609684. {fitment}

Switch reinforcement for 4-button power window switch on 1948-56 Buick and Oldsmobile, 1948-53 Cadillac, and 1955-57 Chevrolet and Pontiac. Buick Applications 1948-56 all models Cadillac Applications 1948-53 all models ...

This day/night mirror is a reproduction of the original inside non-glare rear view mirror. Fits 1950-53 Oldsmobile, Buick and Cadillac models with one piece windshield using loop type mirror mounting bracket with set screw. ...

Rubber bumper for front lower control arm on 1939-56 Oldsmobile, and 1940-56 Buick models. Also used as a rear axle bumper on 1950-53 Cadillac models. Sold individually. Two required per vehicle Buick Applications 1940-56...

Button for power window and power seat switches on a wide variety of 1949-54 GM models including various Buick, Cadillac, Oldsmobile, and Packard models as listed. For models with power windows and/or seats. Sold...

Headlight rim seal attaches to the inner lip of the headlight bezel and seals around the headlight bulb. Sold individually. Buick Applications: 1940-54 all models Cadillac Applications: 1952-56 all models Oldsmobile...

Upper control arm rubber bumper for various 1937-56 Oldsmobile and 1939-52 Chevrolet passenger car models. Two per vehicle, sold individually. Oldsmobile Applications: 1937-56 Oldsmobile - all models Chevrolet...

Trunk emblem insert for all 1952 98 models and all 1953 88, Super 88 and 98 models except Fiesta. This insert is five inches in diameter, and has the correct silver finish with black background and silver continents

10 piece clip set for hood and trunk letters, sold in a package of 10 clips... enough to install one OLDSMOBILE letter set on hood or trunk. Oldsmobile Applications 1950-52 all models - hood 1950-52 all models - trunk 1953 all models - grille 1953 all 88 models - trunk

Door jamb light switch mounting pad for all 1941-56 Oldsmobile and Buick models and 1948-64 Cadillacs. Die cut rubber gasket that mounts under the door jamb switch. Sold individually. Buick Applications: 1941-56 All Models ...

Reproduction window stops for various 1941-61 Chevrolet models. Cushion (stem bumper), window stop, front, rear, quarter windows, lower. Replaces #4131052. For front and rear door, rear side and quarter windows as req'd. 7/8"...

Stabilizer bar bushings for 1939-57 Oldsmobile front stabilizer bar, 1941-56 Oldsmobile rear stabilizer bar, and 1949-57 Buick front stabilizer bar. Sold in a pair to service one stabilizer bar. Buick Applications: 1949-57...

Chrome bezel for roof panel 'Holiday' emblem on 1952-53 98 Holiday coupes. Sold individually. Die cast, chrome plated bezel is used with #4151118 emblem insert, sold separately.

Reproduction of the original vent window crank handle designed for use with various 1954-58 Buick and Oldsmobile models. Each vent window crank measures 3 1/2 inches long and manufactured in die cast zinc featuring a chrome...

Bracket for the stabilizer bar bushing on various 1939-58 Buick and Oldsmobile models. Produced in stamped steel as original and painted to protect against the elements. Sold individually. Two required per vehicle. Buick...

Round door lock pillar bumper for many 1949-57 Oldsmobile, 1941-60 Buick, and 1953-58 Cadillac closed models that use a screw retained bumper. Sold individually, screw included.

Reproduction 'Holiday' roof panel emblem plastic insert for 1952-53 Oldsmobile 98 models. Insert has gold colored ribbed sections on a black background with 'Holiday' lettering in chrome. Sold individually. Used along with...

Replacing the rubber door stoppers will help keep your doors aligned correctly. Fits 1955-57 roof rail and B-pillar post corner {fitmen}

New washer jar cap replaces often worn or rusted original. Stamped steel cap features the words "WATER" and "VACUUM" stamped in the proper location in the authentic original font style, and comes with the plastic fitting...

Correct 6 volt replacement dimmer switch for various 1930-70 classic American vehicles including 1947-54 Chevrolet/GMC truck models and 1955 Chevrolet and GMC 1st series truck models. Fits a wide array of makes and models...

'Ninety Eight' script for trunk lid on 1953-55 Olds 98 and the front fenders on 1955 Olds 98 4-door sedans. Sold individually (one 'Ninety' and one 'Eight'), includes fasteners. Two are required for front fenders, one is...

Exact copy of the original part with cadmium plated finish. Buick Applications: 1949-58 all models Oldsmobile Applications: 1941-48 all models 1949-58 Oldsmobile 76, 88, Super 88 and 98 models (w/ vertically mounted spare...

Reproduction fuel cap for a wide variety of Buick and Oldsmobile passenger car models. Produced in stamped steel construction featuring bright cadmium plating and square rivet head in center of cap for authentic original...

Switch retainer for single button power window switch on 1948-58 Buick and Oldsmobile, 1948-53 Cadillac, and 1955-57 Chevrolet and Pontiac. Buick Applications 1948-58 all models Cadillac Applications 1948-53 all models ...

Reproduction chrome convertible top handle for various 1948-54 GM convertible models. Each handle includes mounting screw and spring washer. Replaces GM part # 4562304. Buick Applications: 1949-53 All Convertible Models ...

Switch reinforcement for single button power window switch on 1948-58 Buick and Oldsmobile, 1948-53 Cadillac, and 1955-57 Chevrolet and Pontiac. Buick Applications 1948-58 all models Cadillac Applications 1948-53 all...

Trunk latch and guide pin screw package for 1950-58 models. Set of seven screws used to mount the trunk latch and guide pin to the underside of the deck lid. Buick and Oldsmobile models. Buick Applications: 1950-58 all...

Reproduction 4-button power window switch for a variety of 1948-54 GM models. Sold individually. Bezel is not included, but sold separately, under part # 4557610. Buick Applications 1949-53 All (with hydraulic power windows) Oldsmobile Applications 1948 Ninety Eight 1949-53 All (Except 1953 Fiesta) Cadillac Applications 1948-53 All Packard Applications 1951-54 All