Product#: 14163

1947-55 Chevrolet, GMC Truck; OE Style Rear Shock Absorber; Gray Finish; Pair

Reproduction of the original style rear shock absorber designed for use on Chevrolet and GMC truck models. Each shock is manufactured to exact factory specifications replicating the original in quality, functionality, and...


Product#: FSB903

1974-78 Mustang II 3/4" Front Sway Bar; Measures 39-1/4" Wide; For Standard Crossmember

Replacement 3/4" sway bar kit for hot rods and custom trucks running standard width crossmember Mustang II front suspension. Designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved...


Product#: 14162

1947-55 Chevrolet, GMC Truck; OE Style Front Shock Absorber; Gray Finish

Reproduction of the original style front shock absorber designed for use on Chevrolet and GMC truck models. Each shock is manufactured to exact factory specifications replicating the original in quality, functionality, and...


Universal Top Spring Hat Set; Weld-In Mustang II Suspension Upgrade
NEW

Product#: 154632

Universal Top Spring Hat Set; Weld-In Mustang II Suspension Upgrade

Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...


Product#: 14927

Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each

Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...


Product#: 154891

1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair

Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...


Product#: RSB504

1947-59 Chevrolet, GMC,Truck, 1948-56 Ford Truck; Rear Sway Bar; 7/8" Diameter

Rear sway bar and hardware for 1947-59 Chevrolet, GMC pickup trucks and 1948-56 Ford pickup truck models. This sway bar is designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved...


Product#: W1006

1964-2000 GM; Front Coil Spring to Frame Rubber Insulator; 1/4" Thick; LH or RH; Various Models; Each

Reproduction molded rubber front coil spring insulator that mounts between the coil spring and the frame on various 1949-96 vehicles. This insulator keeps the spring from riding metal-to-metal on the frame. Coil spring...


Product#: FSB904

1974-78 Mustang II 3/4" Front Sway Bar; Measures 43-1/4" Wide; For Narrowed Crossmember

Front sway bar kit for hot rods and custom trucks running narrowed corssmember Mustang II front suspension kits. These 3/4" sway bars are designed to minimize body roll, under-steer and over-steer when cornering, resulting in...


Frame Rail Chassis Boxing Plates; Weld-In; For Mustang II IFS Front Suspension Conversion
NEW

Product#: 154633

Frame Rail Chassis Boxing Plates; Weld-In; For Mustang II IFS Front Suspension Conversion

Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...


Product#: A15589

Hex Nut 7/16-14

Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell...

Hex Nut 7/16-14

MSRP $0.99 ea
Classic $0.69 ea

Sway Bar Bracket Set; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH and RH
NEW

Product#: *FSB911A

Sway Bar Bracket Set; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH and RH

This universal sway bar end link bracket set is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...


Product#: FSB911

Sway Bar Bracket; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH or RH

This universal sway bar end link bracket is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...


Universal; 28" Yellow Powder Coated; Traction Bars; For Multi-Leaf Springs Only
FEATURED

Product#: LW20475

Universal; 28" Yellow Powder Coated; Traction Bars; For Multi-Leaf Springs Only

Designed to fit most leaf springs, these bars strengthen rear suspension and reduce wheel hop. They are constructed from heavy gauge rectangular steel and feature MIG welded brackets for extra strength. Rubber snubbers,...


Product#: T6162471

1947-53 GM Truck Big Block TCI Stage II Stock Width Frame Performance Chassis with Coilovers

Renovate your classic truck with a new chassis by Total Cost Involved! This stout frame features extended 8" main rails for increased rigidity and clearance between crossmembers while retaining the original profile. Designed...


Product#: *T6071211

1947-54 GM Truck TCI Stage 2 Front Suspension; Manual Steering, 11" Rotors with 5 x 5" Bolt Pattern

This is the independent front suspension from the Stage 2 TCI chassis. The heavy-duty ball joints and control arms are built to support the extra weight of truck applications. Steering geometry is designed to maximize...


Product#: *T6071311

1947-54 GM Truck TCI Stage 2 Suspension; Manual Steering, 11" Rotors with 5 x 5-1/2" Bolt Pattern

This is the independent front suspension from the Stage 2 TCI chassis. The heavy-duty ball joints and control arms are built to support the extra weight of truck applications. Steering geometry is designed to maximize...


Product#: HS40100P

1947-54 GM Truck Small Block Superide II Conversion With Power Rack And Pinion

The Superide II IFS system features steering geometry very similar to the Mustang II system, using Heidt's Mustang II drop spindles to allow a front mount rack/pinion unit and provide plenty of engine clearance. For wheel...


Product#: *T6071412

1947-54 GM Truck TCI Stage 2 Suspension; Power Steering, 11" Rotors with 6 x 5-1/2" Bolt Pattern

This is the independent front suspension from the Stage 2 TCI chassis. The heavy-duty ball joints and control arms are built to support the extra weight of truck applications. Steering geometry is designed to maximize...


Product#: *T6071112

1947-54 GM Truck TCI Stage II Suspension; Power Steering, 11" Rotors with 5 x 4-3/4" Bolt Pattern

This is the independent front suspension from the Stage 2 TCI chassis. The heavy-duty ball joints and control arms are built to support the extra weight of truck applications. Steering geometry is designed to maximize...