Product#: K521

1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models

OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will...

Product#: UK915

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long

This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...

Product#: FT3005A

1957 Chevrolet Bel Air, 150, 210 Station Wagon, Nomad; Fuel Tank; Zinc Coated; 17 Gallon Tank

Reproduction of the original fuel tank designed for use with 1957 Chevy Bel Air, 150, 210, station wagon and Nomad models (except 9 passenger models). This reproduction tank is manufactured in quality zinc coated steel and...

Product#: FT3002C

1957 Chevy Bel Air, 150, 210; Fuel Tank; without Vent Tube; with Round Corners; Stainless Steel; 16 Gallon Capacity; Except Nomad, Station Wagon Models

Correct reproduction of the original fuel tank designed for with 1957 Chevrolet Bel Air, 150, and 210 models (except station wagon, Nomad models.. This reproduction fuel tank is manufactured in stainless steel replicating the...

Product#: FT3000B

1955-56 Chevy Bel Air, 150, 210; NiTerne Fuel Tank; 16 Gallon; With Round Corners; GM28A

Reproduction of the original fuel tank designed for use with 1955-56 Chevrolet Bel Air, One-Fifty Series, and Two-Ten Series models without Evaporative Emission Control (EEC). Each fuel tank is manufactured in quality stamped...

Product#: AL124

Accelerator Throttle Rod; Universal Fit

Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...

Product#: FT3003B

1957 Chevy Bel Air, 150, 210; Niterne Coated Fuel Tank; 16 Gallon; w/Square Corners; with Vent Tube

Reproduction of the original fuel tank designed for use with 1957 Chevy Bel Air, 150, and 210 models (except wagon). This reproduction tank is manufactured in quality NiTerne coated steel and features square corners and comes...

Product#: FT3001B

1955-1956 Chevrolet Bel Air, 150, 210; Ni-Terne Coated Fuel Tank; with Square Corners; without Vent Tube; 16 Gallon Capacity; Except Nomad, Station Wagon Models

Reproduction of the original Ni-Terne fuel tank designed for use exclusively with 1955-1956 Chevrolet Bel Air, 150, 210 models except Nomad, and station wagons. This OE-quality Ni-Terne coated reproduction stamped steel fuel...

Product#: FT3002B

1957 Chevrolet Bel Air, 150, 210; Ni-Terne Coated Fuel Tank; with Round Corners; with Vent Tube; 16 Gallon Capacity; Except Nomad, Station Wagon Models

Reproduction of the original Ni-Terne fuel tank designed for use exclusively with 1957 Chevrolet Bel Air, 150, 210 models except Nomad, and station wagons. This OE-quality Ni-Terne coated reproduction stamped steel fuel tank...

Product#: FT3003A

1957 Chevy Bel Air, 150, 210; Zinc Coated Fuel Tank; w/Square Corners; with Vent Tube; 16 Gallon Tank

Reproduction of the original fuel tank designed for use with 1957 Chevy Bel Air, 150, and 210 models (except wagon). This reproduction tank is manufactured in quality zinc coated steel and features square corners and comes...

Product#: C67808

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps

Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...

Product#: TF700067

1955 Chevrolet Bel Air, 150, 210; Gas Filler Door Assembly; With Hinge and Spring

Reproduction fuel filler door assembly for 1955 Chevrolet Bel Air, 150, and 210 models. Each fuel door assembly is manufactured to correct factory dimensions offering an authentic replacement of the old, damaged, or worn out...

Product#: TF100418

1955-57 Chevy Bel Air, 150, 210, Nomad; Accelerator Pedal Pad

Correct reproduction of the original accelerator pedal designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad models. Each pad is manufactured to correct factory specifications replicating the original in design...

Product#: TF700294

1957 Chevy Bel Air, 150, 210; Fuel Door Inner Support Box ; Inside Quarter Panel

Reproduction fuel box door for 1957 Chevrolet models. This reproduction is installed in the quarter panel where the gas fuel door is located. Manufactured in stamped steel to original specifications. Includes the fuel door...

Product#: FT3100B

1955-57 Chevrolet Bel Air, 150, 210; Fuel Tank Mounting Straps; Stainless Steel; Pair; Except Nomad, Station Wagon Models

Reproduction of the original gas tank straps designed for use with 1955-57 Chevrolet Bel Air, 150, 210, Del Ray coupe and sedan models. Each strap is manufactured in quality stainless steel with all correct contours for an...

Product#: TF700018

1955-57 Chevrolet Wagon & Nomad; Fuel Tank Sending Unit; 3/8" Line

Reproduction fuel sender for your classic Chevy wagon or Nomad. Each sender is produced in quality steel to resist corrosion within your fuel tank. Provides the fuel gauge with the signal to indicate fuel level. Comes with...

Product#: TF700017

1955-57 Chevrolet; Fuel Tank Sending Unit; For 9 Passenger Wagon; 5/16" Line

Reproduction fuel sender for your classic Chevy 9-passenger wagon. Each sender is produced in quality steel to resist corrosion within your fuel tank. Provides the fuel gauge with the signal to indicate fuel level. Comes with...

Product#: CX5042

1954-59 Chevy, GMC Truck; Fuel Tank Sending Unit; Universal Fit; without Pick-Up Tube; 0-90 Ohm

Universal fuel tank sending unit for various GM and other models that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm gauges, each sending unit includes the sender, float, float rod, hardware,...

Product#: TF700038

1956-62 GM; Fuel Tank Filler Hose; 2" ID x 4-7/16" Length

Reproduction fuel tank filler hose for 1957 models. Hose is specifically engineered to stand up to gasoline, fuel oil, and other petroleum-based products. Clamps sold seperately. Measures 4-7/16" in length, inside diameter...

Product#: 9047E

Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length

Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...