Product#: 3415

Bumper Bolt with Conical Keps Hex Nut; Polished Stainless Steel Capped Head; 3/4" Diameter; 3/8-16" x 1"; Zinc Plated

Reproduction GM bumper bolt for a variety of General Motors and Chrysler applications. Each zinc-plated steel carriage bolt features a polished stainless steel cap for superb cosmetic appearance, corrosion resistance and long...


Product#: 2710

Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head

Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...


Product#: 8610

Flat Washer; 1/2" USS; Zinc Plated

1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...


Product#: 13757

1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon

Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...


Product#: 10362

Bolt, 5/16-18 x 13/16" Pointed Tip With Hex Washer Head, Black Phosphate

OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...


Product#: 3899508

1959-80 Trico Windshield Wiper Blade; 15" Length; Various Models; Each

Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...


Product#: K51020

1962-76 GM, Dodge, Plymouth; Various Models; Convertible Top Boot Storage Bag

Why leave your top boot in the trunk exposed when you can keep it safe and clean by safely storing it in this special top boot storage bag. The storage bag will help protect your vehicles top boot while being stored in the...


Product#: 3819074

1958-80 TRICO RF-15 Style Wiper Blade Refill; 15" Length; Reproduction; Various Models

OER® reproduction of the original Trico RF-15 wiper blade insert/refill for 15" TRICO wiper blades. This period-correct TRICO RF-15 style insert is made with a stainless steel vertebra and a precision wiping edge produced...


Product#: 153391

1966-84 Wiper Blade; 16" Anco Style; 1/4" Bayonet Connector; Polished Stainless; Each

Reproduction 16" wiper blade assembly manufactured to factory specifications, featuring a bright polished stainless steel finish and premium wiper insert. Fits 1/4" bayonet end wiper arms. Sold individually. Product...


Product#: 11503957

U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each

Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...


Product#: HK234

1960-72 GM, Chrysler, Ford; Convertible Top Hydraulic Hose Set; with Power Top; White Hose; O.L.114"; Center to End 57-1/4"

Reproduction of the original hydraulic hose set designed for use with a wide variety of convertible models as listed. Finding an original hose for your early convertible is next to impossible. If you own a convertible model...


Product#: DW667T

1966-69 Fairlane/Comet/Cyclone/Montego Windshield; Tinted With Mirror Bracket

OER reproduction windshield glass for various 1966-69 models. Replacing your original damaged or missing windshield glass will enhance your vehicle's appearance and safety by allowing you to see clearly. Each windshield comes...


Product#: A1017

3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each

Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...


Product#: K164

Windshield Wiper Blades; Aero Style; 15"; for 1/4" (7mm) Bayonet Style Arms; Pair; Various Models

High quality reproduction of the stainless steel "Aero" Anti Wind-Lift Wiper Blades designed to fit 7mm wide bayonet style wiper arms. Popularized in the 1960's and 70's to combat wind lift at high speeds, these 15 inch wiper...


1959 Ford, Mercury; Convertible Top Rear Tack Strip Bow Set; Tacking Rail; Trimstick; 3-Piece
NEW

Product#: FTS5959

1959 Ford, Mercury; Convertible Top Rear Tack Strip Bow Set; Tacking Rail; Trimstick; 3-Piece

Replace the worn or rusted out rear convertible tack strip bow or rear tacking rail set with this quality reproduction. This 3 piece tack strip, also referred to as a trimstick set mounts below the rear window area inside the...


1968-69 Ford Torino, Mercury Montego; Convertible Top Rear Tack Strip Bow Set; Tacking Rail; Trimstick; 3-Piece
NEW

Product#: FTS6869

1968-69 Ford Torino, Mercury Montego; Convertible Top Rear Tack Strip Bow Set; Tacking Rail; Trimstick; 3-Piece

Replace the worn or rusted out rear convertible tack strip bow or rear tacking rail set with this quality reproduction. This 3 piece tack strip, also referred to as a trimstick set mounts below the rear window area inside the...


1970-71 Ford Torino, Mercury Montego; Convertible Top Rear Tack Strip Bow Set; Tacking Rail; Trimstick; 3-Piece
NEW

Product#: FTS7071

1970-71 Ford Torino, Mercury Montego; Convertible Top Rear Tack Strip Bow Set; Tacking Rail; Trimstick; 3-Piece

Replace the worn or rusted out rear convertible tack strip bow or rear tacking rail set with this quality reproduction. This 3 piece tack strip, also referred to as a trimstick set mounts below the rear window area inside the...


Product#: ME7602

Wiper Blade Insert; Replacement; 16" Anco Style; Each

OER reproduction Anco-style windshield wiper blade insert for various classic American vehicle models from the 1960's and up. These 16" wiper blades are manufactured from quality molded rubber as original. Refill is...


Product#: 17528D

16" Windshield Wiper Blade Refill; Pair; 16" x 3/8" wide

Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....


Product#: MM3-CM

1964-66 Ford Mustang, Fairlane, Falcon, 1965 Comet; Outer Door Mirror; Non-Remote; RH

Reproduction 1964-66 outer door mirror for the RH passenger side on various Ford and Mercury models. This authentic reproduction is designed to replace the original mirror or can be added to a vehicle not originally equipped...