Product#: X600750

BOLT, 5/16-18 X 1-1/4" Pointed Tip With Hex Washer Head, Black Phosphate

OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10...


Product#: MD2085

1970-82 Chrysler,Plymouth,Dodge; Turn Signal Switch; 11 Wire Style

Reproduction Chrysler, Dodge & Plymouth turn signal switch assembly to replace the worn out or non functional original. Manufactured to exact specifications, each switch features injection molded construction with correctly...


Product#: 21025

OER Smart Charger 1250; Smart Battery Charger And Maintainer; 6V/12V; 1.25 Amp

The OER Smart Charger 1250 battery charger and maintainer for classic cars and trucks provides high frequency automatic intelligent charging for 6V or 12V lead-acid, flooded, or sealed maintenance-free (AGM and Gell Cell)...


Product#: MD2462

1966-73 Chrysler, Dodge, Plymouth; Battery Hold Down Set; Various Models

Repproduction of the original battery mounting hold down set designed for use on various 1966-69 Dodge and Plymouth models. Replace your damaged or missing battery tray hold down components with this quality reproduction....


Product#: 2444442

1966-74 Chrysler, Dodge, Plymouth; Starter Relay

Quality replacement starter relay designed for use on all 1966-74 Chrysler, Dodge and Plymouth models. This starter relay mounts on the inner fenderwell near the battery. Will fit and install on all 1966-74 Chrysler, Dodge,...


Product#: MD9341

1962-81 AMC, Chrysler, Dodge, Plymouth; Headlamp Switch; 7 Terminals Plus Ground; with 1-5/8" Rheostat

Reproduction headlamp switch for various 1962-74 Mopar A and B-Body models and other vehicle models as listed. This switch features 7 terminals, plus 1 ground terminal on the bottom rear portion of the switch that can be used...


Product#: MD6417

1968-76 Neutral Safety Switch Pig Tail; Repair Harness; 3 Prong Connector

Reproduction neutral safety switch harness and socket used to replace the old or damaged harness and connector on various 1968-2002 AMC, Chrysler, Dodge, and Plymouth models. This replacement wiring includes the socket and...


1969-94 Chevrolet, Oldsmobile, Pontiac; Switch; Ignition Buzzer; Key Alarm; For Models With Tilt
NEW

Product#: 7811092

1969-94 Chevrolet, Oldsmobile, Pontiac; Switch; Ignition Buzzer; Key Alarm; For Models With Tilt

New reproduction ignition key buzzer switch to fit a wide variety of 1969-94 GM models with a tilt steering column.  You can now replace your broken or missing buzzer switch with this new factory OEM style replacement part to...


Product#: 7804414

1969-94 Chevrolet, Oldsmobile, Pontiac; Switch; Ignition Buzzer; Key Alarm; For Models Without Tilt Wheel

New reproduction ignition key buzzer switch to fit a wide variety of 1969-94 GM models without a tilt steering column.  You can now replace your broken or missing buzzer switch with this new factory OEM style replacement part...


Product#: MD9340

1962-81 AMC, Chrysler, Dodge, Plymouth; Headlamp Switch; 7-Terminal; with 1-5/8" Rheostat

Reproduction headlamp switch for various 1962-76 Mopar A and B-Body models. This 7 terminal switch does not have a ground terminal on the bottom of the backside or rear of switch. This switch features a 1-5/8" ceramic...


Product#: A17690

1967-90 AMC/Chrysler/GM/Ford; Wiring Connector; 2-Terminal; Female; Various Applications

Reproduction 2-terminal wiring connector with pigtail to fit a wide variety of AMC and GM applications. This connector is used on relays, AC clutch cycle switches, AC compressor, back-up lamp switches, HVAC components,...


Product#: K0076

Front Fender Wire Harness Straps; 2-1/4" Long; Black Nylon

A hot exhaust manifold can cause serious damage to your electrical system. If not properly fastened, the wiring harness leading to your alternator/generator or other wiring harnesses could fall into an open area between the...


Product#: 21026

OER Smart Charger 800; Battery Charger And Maintainer; 12V; 0.8 Amp

The OER Smart Charger 800 battery charger and maintainer for classic cars and trucks provides high frequency automatic intelligent charging for 12V lead-acid, flooded, or sealed maintenance-free (AGM and Gell Cell) batteries....


Product#: MD9337

1962-81 Mopar, AMC; Headlamp Switch; 7 Terminals Plus Ground; With 1-1/4" Rheostat

Reproduction headlamp switch for various 1962-81 Mopar A and B-Body models and other models as listed. This switch features 7 terminals, plus 1 ground terminal on the bottom rear portion of the switch that can be used on...


Product#: MD9343

1975-99 Chrysler, Dodge, Plymouth; Headlight Switch; 9-Terminal; with Ceramic Style Rheostat

Reproduction headlamp switch for various 1975-99 Mopar models. This 9 terminal switch is produced with an older style ceramic rheostat with metal spring contact (rather than the newer printed circuit board style rheostat) for...


Product#: DS121

Headlamp Switch; 3 Position; Universal Fit

Universal fit headlamp switch for a wide variety of vehicle applications from the 1940's and beyond. Each switch features 3 position push/pull functionality with knob and shaft. Required a 3/8 diameter hole for mounting, and...


Painless 21-Circuit Universal Chassis Harness without Column Ignition Switch Connector
FEATURED

Product#: 10102

Painless 21-Circuit Universal Chassis Harness without Column Ignition Switch Connector

This 21-circuit kit is our most widely used customizable chassis harness. You'll find that it's easily adaptable to almost any vehicle. This universal harness will work on carbureted or any stand alone fuel injected engine...


Painless 14 Circuit Universal ATO Fuse Block Assembly
FEATURED

Product#: 30001

Painless 14 Circuit Universal ATO Fuse Block Assembly

Use this 14 Circuit OEM Universal style pre-wired fuse block as a starting point for custom wiring. All you have to do is terminate each circuit wire and attach it to the fuse block. Pre-wired and labeled for the following...


Product#: 60524

2008+ Gen IV LS3 EFI Harness; Throttle By Wire

This harness is standalone and is not intended to replace the OEM engine wiring. Standalone harnesses are intended to run the designated engine & transmission only, generally when swapped into another vehicle. This harness...


Product#: MD4235

access 24 Circuit & Up To 7 Relay Wiring Kit - Mopar

This newly engineered fuse system from Ron Francis Wiring, known as the ACCESS 24/7 [patent pending] comes standard with 24 fuses and 3 relays, along with a unique mounting system and room for 4 additional relays. The ACCESS...