1955-57 Chevy Bel Air, 150. 210; Upper Control Arms; Rubber Bushings; Pair
FEATURED

Product#: 153947

1955-57 Chevy Bel Air, 150. 210; Upper Control Arms; Rubber Bushings; Pair

New stock style upper control arms designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad models. Includes a pair with cross shafts, bushings, and ball joints installed. These are made from heavy gauge steel and...


Product#: *TF500023P

1955-57 Chevy Bel Air, 150, 210; Front End Rebuild Set; Rubber; with Power Steering

Reproduction of the original components required to rebuild the front end for 1955-57 Chevrolet Bel Air, 150, 210 models with power steering. Each componet is manufactured to original factory specifications in the OE rubber...


Product#: 153635

1955-57 Chevy Bel Air, 150, 210; Lower Tubular Control Arms; Pair

Tubular control arms are designed for maximum strength and visual impact. These control arms are designed for a stock replacement offering a great look. All arms capture both sides of the bushing, unlike the originals that...


Product#: 153948

1955-57 Chevy Bel Air, 150. 210; Lower Control Arms; Rubber Bushings; Pair

New stock style lower control arms designed for use with 1955-57 Chevrolet Bel Air, 150, 210, and Nomad models. Includes both RH and LH lower control arms with cross shafts, bushings, and ball joints pre-installed. Each lower...


Product#: TF500042

1955-57 Chevrolet Bel Air, 150, 210; 2" Drop Spindles; RH and LH; Pair

These one piece spindles allow you to lower vehicle ride height 2" without affecting steering geometry or suspension travel, which also eliminates the need for bolt-on caliper brackets or steering arms. Cast from the highest...


Product#: RL7

3-1/4" Wide X 6-3/4" Long Leaf Spring U-Bolts

Reproduction OE-style U-bolts and nuts for rear leaf springs from OER®. 2 pair required per axle. Comes with heat treated grade 8 nuts and F436 heat treated and hardened heavey duty washers. {specs} Applications: ...


1955-57 Chevrolet Bel Air, 210, 150, Del Ray; Rear Sway Bar Set; 7/8" Diameter; Except Nomad or Wagon Models
NEW

Product#: RSB503

1955-57 Chevrolet Bel Air, 210, 150, Del Ray; Rear Sway Bar Set; 7/8" Diameter; Except Nomad or Wagon Models

Rear sway bar for 1955-57 Chevrolet Bel Air, One-Fifty series, Two Ten series (except Nomad or wagon models). This sway bar is designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved...


Product#: FSB900

1955-57 Bel Air, 150, 210, Nomad; Front Sway Bar; 1" Diameter

These sway bars are designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved vehicle handling and control. These offer all of the above without affecting your ride quality. Kit...


Universal Top Spring Hat Set; Weld-In Mustang II Suspension Upgrade
NEW

Product#: 154632

Universal Top Spring Hat Set; Weld-In Mustang II Suspension Upgrade

Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...


Product#: 14927

Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each

Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...


Product#: 14794

1955-57 Chevy Bel Air, 150, 210; Upper Control Arm Shaft Set; with Rubber Bushings

This reproduction upper control arm shaft set is for use on 1955-57 full size models. These upper shafts have an extra 2 degrees of caster built into them. The added caster is a must for cars equipped with power steering....


Product#: 12163

1955-64 Chevy Bel Air, 150, 210, Biscayne, Impala; Lower Control Arm Bushing Set; 4 Piece Set

Reproduction of the original lower control arm bushings designed for use with 1955-64 Chevrolet Bel Air, Impala, Corvair, and Full Size models. Each bushing is manufactured to factory specifications. Add new life to your...


Product#: *TF500326

1955-57 Chevrolet Passenger Car Tubular Control Arm Set Upper and Lower

These tubular control arms are designed for maximum strength and enhance the handling performance of 1955-57 Chevrolet passenger car models. These arms are not only stronger and lighter weight than the factory arm, they also...


Product#: *TF500023

1955-57 Chevrolet Bel Air, 210, 150; Complete Front End Rebuild Set; Rubber; w/o Power Steering

Reproduction of the original components required to rebuild the front end for 1955-57 Chevrolet Bel Air, 150, 210 models without power steering. Each componet is manufactured to original factory specifications in the OE...


Product#: *TF500022

1955-57; Chevrolet Bel Air, 150, 210; Front End Rebuild Set; Basic; Manual Steering

Reproduction of the original components required to rebuild the front end for 1955-57 Chevrolet Bel Air, 150, 210 models. Each componet is manufactured to original factory specifications in the OE rubber material replicating...


Product#: 153634

1955-57 Chevy Bel Air, 150, 210; Upper Tubular Control Arms; Pair

Enhance the handling performance of your 1955-57 Chevrolet Bel air, 150, 210, or Nomad model with tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature improved...


Product#: 154891

1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair

Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...


Product#: 153637

1955-57 Chevrolet Bel Air, 150, 210; Disc Brake Drop Spindles; 2" Drop

This 2" drop spindle set for 1955-57 Chevrolet Bel Air, One-Fifty or Two-Ten models is compatible with most aftermarket single-piston disc brake kits. Spindles use stock steering arms and will improve steering and handling,...


Product#: 18060

1955-2005 GM; Sway Bar End Link; Original Style; with Hardware; Rubber

OER® reproduction of the original sway bar end link designed for use with various 1955-2005 GM car and truck models. Replace the sway bar end links and eliminate issues associated with worn out links. Each sway bar link...


1955-57 Bel Air, 150, 210, Nomad; Front Sway Bar; 7/8" Diameter
NEW

Product#: FSB912

1955-57 Bel Air, 150, 210, Nomad; Front Sway Bar; 7/8" Diameter

Front sway bar for 1955-57 Chevrolet Bel Air, One-Fifty series, Two Ten series, and Nomad models. This sway bar is designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved vehicle...