1956 Chevrolet Nomad Parts - Exterior Trim

Grill installation hardware designed to install grill assemblies on various models. These unique carriage bolts are designed with the original appearance of a rivet, but will work like a nut and bolt when installing the grill...

OE style reproduction molding clip used to attach the vertical paint divider moldings on all 1955-56 models and 1957 150 models. On 1956 Bel Air sedan and wagon models where the paint divider molding extends into the body...

This phillips head tapping screw is zinc plated steel to prevent corrosion and has a pan head. It's a size #8 x 1". Screw Size : #8 Length : 1" Head Style : Phillips pan Point Type : A/AB Finish : Zinc ...

Reproduction chrome window frames for 1955-57 Chevrolet Nomad models. Feature correct chrome plating and will mount just like the originals. Two required per vehicle.

Reproduction of the original lower corner windshield molding designed for use on various 1955-57 Chevy Tri-Five models. Each stainless steel molding is manufactured to factory specifications featuring original style contours...

Reproduction of the original wheel opening molding screws designed to install wheel opening moldings on most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32"...

Original style capped stud and clip nut designed to protect the owner from accidently cutting hands when reaching into areas like the trunk where the rear panel molding could cause harm. , most commonly used for rear quarter...

Reproduction of the original lower windshield molding designed for use on various 1955-56 Chevrolet models. This stainless steel molding is manufactured to original factory specifications and features original style contours...

Reproduction of the original lower windshield molding designed for use on various 1955-56 Chevrolet models. This stainless steel molding is manufactured to original factory specifications and features original style contours...

Reproduction of the original lower corner windshield molding designed for use on various 1955-57 Chevy Tri-Five models. Each stainless steel molding is manufactured to factory specifications featuring original style contours...

OER® reproduction of the original windshield corner molding clips designed for 1955-57 Chevrolet Bel Air, 210 and 150 models (exc. 1955 150 models. When replacing trim pieces on your 1955-57 Chevrolet, it's a good idea to...

Reproduction of the original upper front windshield molding connector designed for use on 1955-57 Chevrolet models. This upper molding connector is frequently damaged or lost when replacing the windshield or windshield...

Reproduction of the circlips/lock washer nuts for a 1/8" stud used to attach varios Mopar grills and other items. Each lock washer nut is replicated to exact factory specs. Manufactured to fit and function as original....

Reproduction phillips head screw for attaching the wheel openig moldings and various reveal molding clips to the window channel of the vehicle. Each screw comes with a wax sealant at the tip of the screw to seal the hole from...

Reproduction of the original style tailgate side trim moldings designed for use with 1955-57 Chevrolet Nomad wagon models. Each molding is manufactured to factory specifications offering an authentic appearance and an...

Reproduction quarter belt moldings for 1955-57 convertible models. These are the moldings that are installed at the top of the quarter panel, and feature factory style contours and the correct stainless finish.

Reproduction of the original hood bar molding designed for use with 1956 Chevrolet Bel Air, 150, 210, Nomad, and Sedan Delivery models. Features correct chrome plating and factory style mounting points. Mounting hardware...

Reproduction quarter belt moldings for 1955-57 convertible models. These are the moldings that are installed at the top of the quarter panel, and feature factory style contours and the correct stainless finish.

Reproduction quarter belt moldings for 1955-57 convertible models. These are the moldings that are installed at the top of the quarter panel, and feature factory style contours and the correct stainless finish.

Reproduction of the tailgate center trim molding designed for use with 1955-57 Chevrolet Nomad wagon models. Each trim molding is manufactured in quality die-cast zinc and featuring a bright polished chrome finish. This trim...

Replacement Nomad and wagon tailgate access covers for 1955-57 Full Size Chevrolet models. Offered in paint grade steel or chrome.

When replacing trim pieces on your 1955-57 Chevrolet it's a good idea to replace worn or damaged clips. These sets are designed to mount any trim in the same way the original hardware did. All sets include enough for both...

Reproduction truck latch cover for 1955-57 Chevy models. This is the cover that goes on the trunk lid to cover the latch.

Reproduction door belt molding screw set for 1955-57 hardtop, convertible, and Nomad models. These screws feature the correct length and shape for a proper fit.

Grill attaching rivet with nut for various applications where a rivet is needed. These have the look of a rivet with the ease of a bolt and nut. Stainless Steel. Sold as each (1 rivet/1 nut) #10-24 x 3/8" Rivet Head bolt...

Reproduction of the original hood bar side extensions designed for use with 1956 Chevrolet Bel Air, 150, 210, and Nomad models. Feature correct chrome plating and factory style mounting points. Includes RH and LH extensions. ...

Reproduction rear fender skirt for early model passenger cars. The rear skirts have become more difficult to obtain over the last few years. As the 1956 models have become ever more popular, the good used parts are becoming...

Reproduction grill tie bar adjustment brackets for 1956 models. Features a stainless steel finish for a custom look.

Reproduction of the original rear scuff pads for 1956 models. Each scuff pad offers an authentic appearance and is designed to fit like original.

When replacing trim pieces on your 1956 Chevrolet 210 two door, it's a good idea to replace worn or damaged clips. These sets are designed to mount any trim in the same way the original hardware did. All sets include enough...

This reproduction screw can be used to install the park lamp assemblies to the grill on 1971-72 Plymouth Duster/Twister 340 models with a "Sharktooth" grill. Can also be used on many other models and applications where a #8...

Reproduction of the original style tailgate trim moldings designed for use with 1955-57 Chevrolet Nomad wagon models. This set includes the center trim, vertical side trim moldings, and chrome handle for a complete...

Reproduction of the original grill for 1956 models. Manufactured to factory specifications, this grill features correct contours, fitment and are finished in the correct chrome plating. Note: Shipped oversize.

Reproduction of the original windshield moldings designed for use with 1955-56 Chevrolet Bel Air, 210, and Nomad models. Each olding is manufactured to correct dimensions offering an authentic appearance and fitment. Finished...

Reproduction upper grill support for 1956 models. This piece secures the top edge of the aluminum grill. Features triple chrome plating.

This reproduction stainless steel fender molding for 1956 Chevrolet Bel Air models feature correct contours, finish and mount using original style hardware. Note: Can be used as either RH lower or LH upper.

Reproduction upper grill support for 1956 models. This piece secures the top edge of the aluminum grill and is EDP coated for rust prevention.

Replacement Nomad and wagon tailgate access covers for 1955-57 Full Size Chevrolet models. Offered in paint grade steel or chrome.

When replacing trim pieces on your 1955-57 Chevrolet Bel Air two door sedan model, it's a good idea to replace worn or damaged clips. These sets are designed to mount any trim in the same way the original hardware did. All...

Reproduction upper rear window molding for 1955-57 two door hardtop models. Manufactured out of stainless steel, featuring correct contours and original style mounting studs.

Reproduction of the original clips and hardware designed to install the lower moldings on 1955-57 Chevy Bel Air, 150, 210, and Nomad models. When replacing trim pieces on your 1955-57 Chevrolet it's a good idea to replace...

Reproduction grill tie bar adjustment brackets for 1956 models. Feature EDP coating for rust prevention.

Reproduction set of the screws used to attach the exterior moldings to the windshield pillar post on all models except convertibles. 12 piece set.

Reproduction of the original hood bar and hood bar side extensions designed for use with 1956 Chevrolet Bel Air, 150, 210, Nomad, and Sedan Delivery models. Each set is manufactured to correct factory specifications featuring...

Reproduction lower grill molding for 1956 Chevrolet models. Triple chrome plated, features correct contours, and mounts just like original.

Reproduction fender top ornaments for 1956 Chevrolet models. Feature the correct chrome finish and mount just like the originals. Mounting hardware is included.

Restorer's Choice 1956 Nomad paint divider filler trim fills the gap between the paint divider molding and side window molding, creating a smooth transition between the two. Available in polished stainless steel. Sold as a...

Reproduction of the original front fender gravel shield designed for use with 1956 Chevrolet Bel Air, 150,210, and Nomad models. Each shield is manufactured in quality stainless steel replicating the original design,...

Reproduction fender extensions for 1956 Chevrolet models. Often mistaken as part of the grill, these triple chrome plated pieces mount to the front lower side of the fenders.

Reproduction door belt molding for 1955-57 hardtop and convertible models. Manufactured to factory specifications featuring original style contours and finish.

Reproduction door belt molding for 1955-57 hardtop and convertible models. Manufactured to factory specifications featuring original style contours and finish.

This reproduction stainless steel fender molding for 1956 Chevrolet Bel Air models feature correct contours, finish and mount using original style hardware. Note: Can be used as either LH lower or RH upper.

Correct style plastic stud mounted clips used on various GM vehicles. Replacement vinyl top molding clips for various GM vehicles from 1967-1974. Correct hardware can make any installation job easier. Replace your...

Reproduction center post moldings for 1955-57 Bel Air four door sedan models. These small moldings mound to the center post between the front and rear belt line moldings.

Reproduction of the original rear scuff pads for 1957 models. Each scuff pad offers an authentic appearance and is designed to fit like original.

Reproduction rear window corner moldings for 1955-57 sedan models. Manufactured out of stainless steel, featuring correct contours and original style mounting studs.