1955-64 GM Full Size; 1955-62 Corvette; Rebuilt 3rd Member Assembly; 3.73 Gear Ratio
NEW
FEATURED

Product#: 55P373

1955-64 GM Full Size; 1955-62 Corvette; Rebuilt 3rd Member Assembly; 3.73 Gear Ratio

Complete professionally rebuilt 1955-64 GM 8.2-inch third member includes all new components (except housing). Comes completly assembled, ready to bolt into your vehicle. Every third member includes: an original GM gear case...


1955-64 GM Full Size; 1955-62 Corvette; Rebuilt 3rd Member Assembly; 3.55 Gear Ratio
NEW
FEATURED

Product#: 55P355

1955-64 GM Full Size; 1955-62 Corvette; Rebuilt 3rd Member Assembly; 3.55 Gear Ratio

Complete professionally rebuilt 1955-64 GM 8.2-inch third member includes all new components (except housing). Comes completly assembled, ready to bolt into your vehicle. Every third member includes: an original GM gear case...


1955-64 GM Full Size; 1955-62 Corvette; Rebuilt 3rd Member Assembly; 4.11 Gear Ratio
NEW
FEATURED

Product#: 55P411

1955-64 GM Full Size; 1955-62 Corvette; Rebuilt 3rd Member Assembly; 4.11 Gear Ratio

Complete professionally rebuilt 1955-64 GM 8.2-inch third member includes all new components (except housing). Comes completly assembled, ready to bolt into your vehicle. Every third member includes: an original GM gear case...


1955-64 GM Full Size; 1955-62 Corvette; Rebuilt 3rd Member Assembly; 3.08 Gear Ratio
NEW
FEATURED

Product#: 55P308

1955-64 GM Full Size; 1955-62 Corvette; Rebuilt 3rd Member Assembly; 3.08 Gear Ratio

Complete professionally rebuilt 1955-64 GM 8.2-inch third member includes all new components (except housing). Comes completly assembled, ready to bolt into your vehicle. Every third member includes: an original GM gear case...


Product#: CE932A

Currie Complete Ford 9-Inch 3rd Member; 31-Spline; with Currie TwinTrac Helical-Gear Style Limited-Slip Differential; (3.00 Ratio)

Currie complete Ford 9-inch third members, make it easy to update your muscle car, sport truck, street rod, or race vehicle with a new gear ratio or carrier. Every Currie Ford 9-inch third member includes: a new nodular iron...


Product#: UR8753090

Yukon Dura Grip Positraction 8.5" 30 Spline 3.08-3.90 Ratios

Yukon Dura Grip® Positraction unit is based on the race-proven four-spring clutch-style design that has been used by GM for years. Assembled with heavy-duty 4320 Chrome-Moly spider gears and composite clutches for...


Product#: G884370

GM 8.2" 10 Bolt Style (Drop-Out) 3.70 Ring & Pinion

Replace your worn out or broken ring and pinion gears with new components from Motive Gear«. Note: Image shows master bearing kit not included. Classic Industries« recommends professional installation. All ring and pinion...


Product#: 5420104

Auburn Gear 8-7/8" 12-Bolt, 4.10/Up, 30 Spline, C-Clip Axle, 4 Series HP Limited-Slip Differential

Auburn Gear's High Performance Series limited-slip differentials outperform standard OEM differentials hands down. They deliver more traction and faster engagement for controlled power transfer and lightning fast reaction to...


Product#: M12144

Moser Performance; Ring Gear Performance Differential Cover; 10 Bolt Chevrolet with 8.2" or 8.5"

Strengthen your rear end with a Moser Performance Cover. This cover is made of 356-T6 aluminum and designed to improve ring and pinion gear life, as well as improve the appearance of your vehicle. It will greatly reduce the...


Product#: 141697-BCHW

Chevy Bowtie Emblem Rear End Cover, Gm, 12 Bolt, Passenger Car

Reinforced lightweight aluminum rear end cover designed to strengthen the rear housing case in heavy torque situations. The familiar Bowtie Emblem is raised and precision milled on a black crinkle coated surface. Each cover...


Product#: R84RMKT

1955-64 Dropout Style 10 Bolt With 8.2" 3.70 Ring & Pinion Master Bearing Set With Timken Bearings

This set is designed to replace the differential bearings on 1962-64 Chevy II models. Master bearing set includes Timken bearings and races, gasket (or RTV silicone), washers, nuts and ring gear bolts for a complete...


Product#: 141696-BCHW

GM 8.2, 8.5 10 Bolt; Rear End Cover, Chevy Bowtie Emblem

Reinforced lightweight aluminum rear end cover designed to strengthen the rear housing case in heavy torque situations. The familiar Bowtie Emblem is raised and precision milled on a black crinkle coated surface. Each cover...


Product#: UR10841

1958-64 Impala / Full Size With 8.4" Dropout Differential Basic Bearing Set With Timkin Bearings

This set is designed to replace the differential bearings on 1958-64 Chevrolet full size models. Basic bearing set includes bearings and races, gasket (or RTV silicone), washers, and nuts for a complete replacement.


Product#: LW18000

Lakewood; Universal; Zinc Plated Drive Shaft Safety Loop

Required and approved by all major racing sanctioning bodies this universal driveshaft safety loop is fully adjustable to fit most vehicles. The four piece design is manufactured from 1/4" thick, 2" wide mild steel, bright...


Product#: T4786

1955-87 GM Cars / Trucks Chrome 10-Bolt Rear End Differential Cover

This replacement rear end cover is manufactured with bright, triple chrome plating and is designed to resemble the configuration of the original covers. This high-quality rear end cover will add a unique, custom appearance to...


Product#: M7126B

GM 12 Bolt Rear End Cover; Chevy 12-Bolt, Dana 60; Semi Gloss Black

Dress up your 12 Bolt or Dana rear end with our Semi-Gloss Black Powder Coated cover. Available for Chevy 12 Bolt car and Dana 60 rear ends.


Product#: 68082-BCHW

Chrysler Pinion Snubber, Adjustable, 8 3/4 Pin Type

Get better traction and prevent bottoming out with this adjustable pin pinion snubber for Chrysler 8-3/4 in. rear ends. When under heavy load (acceleration) the rear springs will compress, and the axle can rotate. A pinion...


Product#: A9500575

1982-2004 GM 10 Bolt Chrome Rear Differential; Black

Replacement steel rear end cover manufactured to resemble the configuration of the original cover. This high-quality, EDP-coated rear end cover will replace that dented, rusted old front or rear cover perfectly. Adds a...


Product#: T4787

1955-81 GM Car/Truck; Chrome Rear Differential Cover; 12-Bolt

This chrome rear end cover is produced in bright triple chrome plating and resemble the configuration of the original covers. Your classic will look great with this high quality cover. {specs}


Product#: 56475SD

Stainless Steel 10 Bolt Defferential Cover Hex Head Bolt Set with Bow Tie Logo (5/16"-18 X 3/4")

This dress-up differential cover bolt set features a Bow Tie logo stamped directly onto the head of the stainless steel bolt. Perfect for stock or chrome covers. What better way to make a statement than with these unique...