1956 Ford F-350 Parts

This reproduction firewall insulation pad mounts onto the firewall area of the interior compartment. Designed to exact factory specifications and manufactured using thick jute padding glued to a die-cut neoprene material,...

Reproduction floor pan for 1956 Ford F-100, F-250, and F-350 pickups. This direct replacement floor pan assembly is manufactured from 18 gauge sheet metal specifically for F-Series trucks. The floor pan is one of the most common areas for rust on classic pickups and if not repaired early the corrosion can spread resulting in a more costly restoration. This pan is made from high quality steel ensuring a proper fit and a permanent repair. {fitment}

Nu-Relics Power Window and 1-piece window kit for 1956 Ford F-Series Pickup Trucks. This model specific power window kit will restore proper function to F-Series trucks with 1-piece window conversions. They come complete with a chrome Nostalgic, 50s and 60s GM style reverse polarity switch and wiring harnesses for dash or console installation.The regulators feature 1018 cold-roll steel construction with bronze oilite thrust bearings at all the pivot points and treated metal for all gears. The all new ACI motors are some of the strongest, most dependable on the market. Nu-Relics Power Window kits offer a lifetime warranty ( Warranty requires a copy of sales receipt or invoice. Customer to return part with a copy of receipt). Standard Ford truck kit contents 2 Regulators (left & right side) 2 New ACI motors 2 Lower glass channels 2 Front vertical glass channels Complete wire harness w/ grommets Applications F-100 F-250 F-350

Reproduction radio antenna assembly for 1956 Ford F100 , F250 , and F-350 Pickup Trucks. This highly accurate reproduction includes the base, mast assembly, and lead-in wiring. Replaces Ford part# B6C-18813-B. Applications: 1956 F-100 1956 F-250 1956 F-350

Reproduction door seal kit for 1956 Ford F100, F250, and F350 Pickup Trucks. These high quality ozone resistant EPDM rubber gaskets mount on the body of the truck with weatherstrip adhesive (not Included) sealing the cab from the outside elements. Sold in pairs. Includes RH and LH door weatherstrip. Applications: 1956 F-100 1956 F-250 1956 F-350

Reproduction passenger side hood hinge assembly for 1956 F-Series pickups. This hinge fits Ford F-100, F-250, and F-350 trucks. Replaces Ford part# B6TZ-16796-A. {fitment}

Brand new, all steel, reproduction of the original door shell designed for use on 1956 Ford F-Series pickup trucks. Each door shell is manufactured in stamped steel to factory specifications replicating the original in quality, design, appearance, and fitment. This is a full replacement door shell that meets or exceeds factory specifications. Comes with a black EDP coating for rust and corrosion prevention. Important: Professional auto-body technicians always recommend test-fitting any body part prior to final paintwork and assembly. {fitment} Note:This is the sheet metal shell only. Does not include handle, hinges, glass, or internals. Ships truck freight.

Reproduction of the original inner windshield pillar post repair panel for the LH, driver side pillar post on 1956 Ford F100, F250, and F350 models. This patch panel replaces the upper steel structure on the inside of the windshield pillar post at the top corner of the cab where the sun visor mounts to the cab. Includes the windshield lip where the windshield seal secures the windshield at the sides. This section is very prone to rust and corrosion. Comes with an EDP coating for rust and corrosion prevention. {fitment}

Reproduction driver side door glass lift channel for 1956 Ford F100, F150, F250, and F350 Pickup Trucks. The lift channel supports the bottom edge of the door glass and provides a lifting point for the window regulator to move the glass. This direct replacement channel will install exactly like the original using a factory or replacement regulator. Replaces Ford part # B6C-8121459-A. Sold each. Applications: 1956 F-100 1956 F-250 1956 F-350 Note: Will fit F-Series models up to F-800.

Reproduction roof trim panel kit for 1956 Ford F-100, F-250 and F-350 pickup trucks. This molded ABS plastic headliner features a medium embossed leather grain that accurately duplicates the original look and texture. ABS plastic is very tough, yet flexible, and does not show scratches or scuffs. It can be easily dyed with a flat vinyl plastic spray paint.{fitment}

B6C-14401

Reproduction overdrive solenoid to relay wiring harness for 1956 Ford F-100, F-250, and F-350 pickup trucks. Replaces Ford part# B6C-14382-A.

Nu-Relics Power Window and 1-piece window kit for 1956 Ford F-Series Pickup Trucks. This model specific power window kit will restore proper function to F-Series trucks with 1-piece window conversions. They come complete with wiring harnesses and a pair of Nu-Crank switches that replace the factory crank mechanism and utilize the original handles as switch levers. The regulators feature 1018 cold-roll steel construction with bronze oilite thrust bearings at all the pivot points and treated metal for all gears. The all new ACI motors are some of the strongest, most dependable on the market. Nu-Relics Power Window kits offer a lifetime warranty ( Warranty requires a copy of sales receipt or invoice. Customer to return part with a copy of receipt). Standard Ford truck kit contents 2 Regulators (left & right side) 2 New ACI motors 2 Lower glass channels 2 Front vertical glass channels Complete wire harness w/ grommets Applications F-100 F-250 F-350

Reproduction tempurature gauge for 1956 Ford F100, F250, and F350 pickup trucks. Replaces Ford # B6C-10883-B.

Nu-Relics Power Window and 1-piece window kit for 1956 Ford F-Series Pickup Trucks. This model specific power window kit will restore proper function to F-Series trucks with 1-piece window conversions. They come complete with a chrome oval reverse polarity switch and wiring harness for door panel installation. The regulators feature 1018 cold-roll steel construction with bronze oilite thrust bearings at all the pivot points and treated metal for all gears. The all new ACI motors are some of the strongest, most dependable on the market. Nu-Relics Power Window kits offer a lifetime warranty ( Warranty requires a copy of sales receipt or invoice. Customer to return part with a copy of receipt). Standard Ford truck kit contents 2 Regulators (left & right side) 2 New ACI motors 2 Lower glass channels 2 Front vertical glass channels Complete wire harness w/ grommets Applications F-100 F-250 F-350

Glove compartment insert for 1956 Ford F-100, F-250, and F-350 pickup trucks. These liners are constructed from stock style panel board and include the factory clips and screws required for install.

Reproduction window crank handle for 1956 Ford F100, F250, and F350 Trucks. This high quality reproduction features OE-style die-cast construction, a triple chrome-plated finish, and a black plastic knob. Replaces Ford part# B6C-8123342. Applications: 1956 F-100 1956 F-250 1956 F-350

Reproduction cowl top vent handle mechanism and rod for 1956 Ford F-Series truck. Each vent handle and rod assembly is produced in stamped steel to original configurations and comes coated in EDP rust preventative coating. This handle mechanism is the mechanism that opens and closes the cowl top vent at the top of the cowl on 1956 Ford trucks. Ford Applications: 1956 Ford Pickup Truck F-100 1956 Ford Pickup Truck F-250 1956 Ford Pickup Truck F-350 Note: For the vent cover and screen refer to part # TR2133AFor the vent frame kit refer to part # TR1026A

Nu-Relics Power Window Kit for 1956 Ford F-Series Pickup Trucks. These model specific power window kits bolt directly into the factory mounting holes and can use the original glass channels. They come complete with standard reverse polarity chrome switches, wiring harness, and reinforcement plates for door panel installation. The regulators feature 1018 cold-roll steel construction with bronze oilite thrust bearings at all the pivot points and treated metal for all gears. The all new ACI motors are some of the strongest, most dependable on the market. Nu-Relics Power Window kits offer a lifetime warranty ( Warranty requires a copy of sales receipt or invoice. Customer to return part with a copy of receipt). Standard Ford truck kit contents 2 Regulators (left & right side) 2 New ACI motors Complete wire harness Applications F-100 F-250 F-350

Reproduction "V8" grille emblem for 1956 Ford F100, F250, and F350 Pickup Truck Models. This high quality reproduction features OE-style die-cast construction with a triple chrome-plated finish. Replaces Ford part # B6C-8259-A.

Reproduction back edge seal for 1956 Ford F100, F250, and F350 Pickup Truck vent windows. This is an accurate reproduction of the original rubber molded over metal gasket used from the factroy. Sold in pairs.

Reproduction division bar assembly for 1956 Ford F100, F250, and F350 pickup trucks. This complete bar installs on the passenger side door of the vehicle and includes the proper brackets and hole to replace the original. Replaces Ford part# B6C-8122297-CA. Applications: 1956 F-100 1956 F-250 1956 F-350

Reproduction passenger side window regulator for 1956 Ford F100, F250, and F350 Pickup Trucks. This direct replacement regulator will install in the stock location using the original hardware. Replaces Ford part# B6C-8123200-B. Sold each. Applications: 1956 F-100 1956 F-250 1956 F-350

Reproduction chrome grill bar for 1956 Ford F-Series trucks. This grill bar is a correct replacement on 1956 F100, F250, and F350 pickups. It is stamped from high-grade heavy gauge steel and features all the correct mounting points for an OE-style fit and finish. Replaces Ford part# B6C-8200-B. Ford Applications: 1956 F-100 1956 F-250 1956 F-350

Reproduction of the original radiator air deflector designed for use with 1956 Ford F100, F250 pickup truck models. This panel installs between the radiator and the fender on F-100, F-250, and F-350 pickup truck models. The deflector's purpose is to divert air toward the radiator for proper cooling. Each panel is manufactured in quality die-stamped steel replicating the original in design, appearance, and fitment. Come with a black EDP coating for rust and corrosion prevention. For use on the LH drivers side. {fitment}

Nu-Relics Power Window and 1-piece window kit for 1956 Ford F-Series Pickup Trucks. This model specific power window kit will restore proper function to F-Series trucks with 1-piece window conversions. They come complete with chrome Nostalgic, 50s and 60s GM style reverse polarity switches and wiring harnesses for door panel installation. The regulators feature 1018 cold-roll steel construction with bronze oilite thrust bearings at all the pivot points and treated metal for all gears. The all new ACI motors are some of the strongest, most dependable on the market. Nu-Relics Power Window kits offer a lifetime warranty ( Warranty requires a copy of sales receipt or invoice. Customer to return part with a copy of receipt). Standard Ford truck kit contents 2 Regulators (left & right side) 2 New ACI motors 2 Lower glass channels 2 Front vertical glass channels Complete wire harness w/ grommets Applications F-100 F-250 F-350

Reproduction of the original radiator air deflector designed for use with 1956 Ford F100, F250 pickup truck models. This panel installs between the radiator and the fender on F-100, F-250, and F-350 pickup truck models. The deflector's purpose is to divert air toward the radiator for proper cooling. Each panel is manufactured in quality die-stamped steel replicating the original in design, appearance, and fitment. Come with a black EDP coating for rust and corrosion prevention. For use on the RH passenger side. {fitment}

Reproduction division bar assembly for 1956 Ford F100, F250, and F350 pickup trucks. This complete bar installs on the passenger side door of the vehicle and includes the proper brackets and hole to replace the original. Replaces Ford part# B6C-8122296-CA. Applications: 1956 F-100 1956 F-250 1956 F-350

Reproduction driver side hood hinge assembly for 1956 F-Series pickups. This hinge fits Ford F-100, F-250, and F-350 trucks. Replaces Ford part# B6TZ-16797-A. {fitment}

Windshield seal without trim groove for 1956 Ford F100, F250, and F350 pickup trucks. This is a standard black gasket and does not have the groove required for installing stainless trim. It is made from ozone resistant EPDM rubber using factory specs for an OE quality fit and finish. Replaces OE # B6C-8103110-A. Note:This gasket goes first on the glass and is installed using the rope-in method. Ford Applications: 1956 F-100 1956 F-250 1956 F-350

Exact reproduction dash insulator assembly for 1956 Ford F-100, F-250, and F-350 pickup trucks. Molded to fit the stock engine setback hump. This ready to install firewall cover is molded from a leather track grain material with black fiberglass insulation.{fitment}

Vintage Air SureFit Air Conditioning Evaporator Kit for 1956 Ford F-Series pickup trucks. Evaporator kits include all the interior components including mounting brackets, duct hoses, wiring harness, cable converters or new dash control panel, louvers (when required), and hardware. They exclude the under-hood equipment such as the compressor, condenser, refrigerant lines, and drier. These systems are great for vehicles already equipped with crate engines or previously installed AC components.

Reproduction passenger side door latch striker plate assembly for 1956 Ford F100, F250, and F350 Pickup Trucks. This direct replacement assembly includes the cast striker plate housing, spring, pin, and nylon pawl/catch. Replaces Ford part# B6C-8122008. Sold each. Applications: 1956 F-100 1956 F-250 1956 F-350

Reproduction of the original parking light assembly for 1956 Ford F100, F250, F350 pickup truck models. These direct replacement assemblies include a stainless steel bezel, clear glass lens, cork gasket, and an OE style housing with bulb and pigtail. Replaces Ford part number # B5C-13200-A. 2 required per vehicle. Sold individually. {fitment}

Nu-Relics Power Window Kit for 1956 Ford F-Series Pickup Trucks. These model specific power window kits bolt directly into the factory mounting holes and can use the original glass channels. They come complete with chrome Nostalgic, 50s and 60s GM style reverse polarity switches and wiring harnesses for door panel installation. The regulators feature 1018 cold-roll steel construction with bronze oilite thrust bearings at all the pivot points and treated metal for all gears. The all new ACI motors are some of the strongest, most dependable on the market. Nu-Relics Power Window kits offer a lifetime warranty ( Warranty requires a copy of sales receipt or invoice. Customer to return part with a copy of receipt). Standard Ford truck kit contents 2 Regulators (left & right side) 2 New ACI motors Complete wire harness Applications F-100 F-250 F-350

Nu-Relics Power Window Kit for 1956 Ford F-Series Pickup Trucks. These model specific power window kits bolt directly into the factory mounting holes and can use the original glass channels. The regulators feature 1018 cold-roll steel construction with bronze oilite thrust bearings at all the pivot points and treated metal for all gears. The all new ACI motors are some of the strongest, most dependable on the market. Nu-Relics Power Window kits offer a lifetime warranty ( Warranty requires a copy of sales receipt or invoice. Customer to return part with a copy of receipt). Standard Ford truck kit contents 2 Regulators (left & right side) 2 New ACI motors Applications F-100 F-250 F-350

Reproduction roof trim panel kit for 1956 Ford F-100, F-250 and F-350 pickup trucks. This molded ABS plastic headliner features a medium embossed leather grain that accurately duplicates the original look and texture. ABS plastic is very tough, yet flexible, and does not show scratches or scuffs. It can be easily dyed with a flat vinyl plastic spray paint.{fitment}

Reproduction head lamp door for 1956 Ford F100, F250, and F350 Pickup Truck Models. This high quality reproduction bezel will fit the driver or passenger side headlight and features stainless steel construction with a quality polished finish. Replaces Ford part# B6C-13064.

Nu-Relics Power Window and 1-piece window kit for 1956 Ford F-Series Pickup Trucks. This model specific power window kit will restore proper function to F-Series trucks with 1-piece window conversions. The regulators feature 1018 cold-roll steel construction with bronze oilite thrust bearings at all the pivot points and treated metal for all gears. The all new ACI motors are some of the strongest, most dependable on the market. Nu-Relics Power Window kits offer a lifetime warranty ( Warranty requires a copy of sales receipt or invoice. Customer to return part with a copy of receipt). Standard Ford truck kit contents 2 Regulators (left & right side) 2 New ACI motors 2 Lower glass channels 2 Front vertical glass channels Applications F-100 F-250 F-350

Nu-Relics Power Window Kit for 1956 Ford F-Series Pickup Trucks. These model specific power window kits bolt directly into the factory mounting holes and can use the original glass channels. They come complete with chrome oval reverse polarity switches and wiring harness for door panel installation. The regulators feature 1018 cold-roll steel construction with bronze oilite thrust bearings at all the pivot points and treated metal for all gears. The all new ACI motors are some of the strongest, most dependable on the market. Nu-Relics Power Window kits offer a lifetime warranty ( Warranty requires a copy of sales receipt or invoice. Customer to return part with a copy of receipt). Standard Ford truck kit contents 2 Regulators (left & right side) 2 New ACI motors Complete wire harness Applications F-100 F-250 F-350

Nu-Relics Power Window Kit for 1956 Ford F-Series Pickup Trucks. These model specific power window kits bolt directly into the factory mounting holes and can use the original glass channels. They come complete with a chrome Nostalgic, 50s and 60s GM style reverse polarity switch and wiring harnesses for dash or console installation.The regulators feature 1018 cold-roll steel construction with bronze oilite thrust bearings at all the pivot points and treated metal for all gears. The all new ACI motors are some of the strongest, most dependable on the market. Nu-Relics Power Window kits offer a lifetime warranty ( Warranty requires a copy of sales receipt or invoice. Customer to return part with a copy of receipt). Standard Ford truck kit contents 2 Regulators (left & right side) 2 New ACI motors Complete wire harness Applications F-100 F-250 F-350

Reproduction steering worm gear and shaft assembly for 1956 Ford F100, F250, and F350 Pickup Trucks. This shaft travels through the steering column and connecting the steering box to the steering wheel. The steering shaft is subjected a great deal of stress over its service life and is often overlooked during steering rebuilds. This vital component should be strongly considered for any serious steering resoration project. Sold individually. . {fitment}

Volts: 12v OHMs: 70 empty-320 full B6C-9275-A

Replacement coolant temperature sender for various 1956 Ford and Mercury models including F-Series trucks. This sending unit is manufactured to factory specifications for proper fitment and function. It features a single spade terminal and 3/8" NPT thread just like the original. Replaces Ford part # B6C-10884.

Reproduction headlight bucket assembly for 1956 F-Series pickup trucks. This assembly will mount on either side of the vehicle and includes the mounting base, head light adjusting bucket, springs, and adjusting screws. Does not include the bulb or wiring harness. Replaces Ford part# B6C-13008-A. Sold individually. Applications: 1956 F-100 1956 F-250 1956 F-350

Nu-Relics Power Window Kit for 1956 Ford F-Series Pickup Trucks. These model specific power window kits bolt directly into the factory mounting holes and can use the original glass channels. They come complete with a illuminated reverse polarity black switch and wiring harnesses for console or dash installation. The regulators feature 1018 cold-roll steel construction with bronze oilite thrust bearings at all the pivot points and treated metal for all gears. The all new ACI motors are some of the strongest, most dependable on the market. Nu-Relics Power Window kits offer a lifetime warranty ( Warranty requires a copy of sales receipt or invoice. Customer to return part with a copy of receipt). Standard Ford truck kit contents 2 Regulators (left & right side) 2 New ACI motors Complete wire harness Applications F-100 F-250 F-350

Reproduction driver side window regulator for 1956 Ford F100, F250, and F350 Pickup Trucks. This direct replacement regulator will install in the stock location using the original hardware. Replaces Ford part# B6C-8123201-B. Sold each. Applications: 1956 F-100 1956 F-250 1956 F-350

Reproduction in-cab gas tank for 1956 Ford F100 , F250 / and F350 Pickup Trucks. This direct replacement steel tank installs in the stock location, behind the seat, using the original hardware. Tank measures 46 3/4" long, 8" wide, 17 ½" deep and hold 20 gallons of fuel. Straps not included, sold each. Applications: 1956 F-100 1956 F-250 1956 F-350

Reproduction black grill bar for 1956 Ford F-Series trucks. This grill bar is a correct replacement on 1956 F100, F250, and F350 pickups. It is stamped from high-grade heavy gauge steel and features all the correct mounting points for an OE-style fit and finish. Replaces Ford part# B6C-8200-B. Applications: 1956-1956 Ford Pickup (F-100) 1956-1956 Ford Pickup (F-250) 1956-1956 Ford Pickup (F-350)

Reproduction of the original cowl top vent frame kit for use with 1956 Ford F-Series truck models. Each kit includes the vent frame assembly, the brace that supports the handle mechanism, and the LH and RH hinges. Handle mechanism, top vent cover, and weatherstrip seal are sold separately. Ford Applications: 1956 Ford Pickup Truck F-100 1956 Ford Pickup Truck F-250 1956 Ford Pickup Truck F-350 Note: For the vent cover and screen refer to part # TR2133AFor the vent handle mechanism and rod, refer to part # TR1026B

Reproduction cab roof skin for 1956 Ford F-100, F-250, and F-350 pickups. This direct replacement front floor section is manufactured from heavy gauge sheet metal specifically for F-Series trucks. The roof skin is one of the most common areas for rust on classic pickups and if not repaired early the corrosion can spread resulting in a more costly restoration. This precision manufactured replacement will ensure a proper fit and a permanent repair. Sold each.

Reproduction door glass channel run for 1956 Ford F-100, F-250, and F-350 pickup trucks. This single piece glass run channel presses into the vertical division bar channel on either the driver or passenger door. Manufactured from high quality ozone resistant materials to the original specifications for an OE quality fit. Sold individually. 2 required per vehicle. Applications: 1956 F-100 1956 F-250 1956 F-350

Reproduction of the original glove compartment door designed for use with 1956 Ford F-100, F-250, and F-350 pickup trucks. Each glove box door is manufactured in stamped steel replicating the original in design and appearance. Comes with black EDP coating for rust and corrosion prevention.  Ford Applications: 1956-1956 Ford Pickup (F150, F250, F, 350)

Nu-Relics Power Window and 1-piece window kit for 1956 Ford F-Series Pickup Trucks. This model specific power window kit will restore proper function to F-Series trucks with 1-piece window conversions. They come complete with standard reverse polarity chrome switches, wiring harness, and reinforcement plates for door panel installation. The regulators feature 1018 cold-roll steel construction with bronze oilite thrust bearings at all the pivot points and treated metal for all gears. The all new ACI motors are some of the strongest, most dependable on the market. Nu-Relics Power Window kits offer a lifetime warranty ( Warranty requires a copy of sales receipt or invoice. Customer to return part with a copy of receipt). Standard Ford truck kit contents 2 Regulators (left & right side) 2 New ACI motors 2 Lower glass channels 2 Front vertical glass channels Complete wire harness w/ grommets Applications F-100 F-250 F-350

Nu-Relics Power Window and 1-piece window kit for 1956 Ford F-Series Pickup Trucks. This model specific power window kit will restore proper function to F-Series trucks with 1-piece window conversions. They come complete with illuminated reverse polarity black switches and wiring harnesses for door panel installation. The regulators feature 1018 cold-roll steel construction with bronze oilite thrust bearings at all the pivot points and treated metal for all gears. The all new ACI motors are some of the strongest, most dependable on the market. Nu-Relics Power Window kits offer a lifetime warranty ( Warranty requires a copy of sales receipt or invoice. Customer to return part with a copy of receipt). Standard Ford truck kit contents 2 Regulators (left & right side) 2 New ACI motors 2 Lower glass channels 2 Front vertical glass channels Complete wire harness w/ grommets Applications F-100 F-250 F-350