1957-1979 Ford Ranchero Parts

Replacement 157-tooth, 28 ounce flywheel for various Ford and Mercury models with manual tranmissions including Mustang, Falcon, Bronco, and Cougar. The flywheel connects to the crankshaft and is where the clutch assembly is...

Replacement Ford 3-speed transmission gasket set for various Ford and Mercury models. Applications include Ranchero, Galaxie, Ranch Wagon, and F-Series Truck. {fitment}

Reproduction of the original style clip designed for use on various Ford and Mercury models. This reproduction clip is designed to hold the heater case in place. Sold individually. 11 clips required. Sold individually. Refer...

Reproduction of the original style battery clamp that secures the bottom mounting foot to the battery tray. For use on various Ford models including 1965-66 Mustangs. Unlike later "over-the-top" clamps, this clamp works with...

The Glen aluminum wheel puts you back in the day of the Trans Am era pony car racing! These wheels are currently used in the Australian Trans Am Series and have shown not only their beauty but their strength and durability....

This Standard Dome Light Dimmer upgrades the boring stock dome light system on most Ford vehicles from the 1950s through the 1980s. This device provides both the “delay” and “fade” functions found on modern vehicles by...

Reproduction dash panel to headlamp junction wire assembly for 1960-63 Ford Falcons with straight-6 engines without air conditioning. Replaces Ford part# C0DF-14290-C.{fitment}

Get timeless styling with the Rocket "Fuel" wheel. Precision-crafted from A356 aluminum, using the strictest quality standards and designed specifically for the offsets of hot rods and muscle cars. With it's gorgeous...

Aldan American TrueLine shocks are designed to work with factory or aftermarket rear end shock absorber setups. The shocks feature 2 in. bodies machined from 6061 T-6 billet aluminum providing a lightweight, high-strength...

Reproduction control valve repair set for use with Midland brake boosters only. Located inside the booster, the control valve allows the booster to hold and release vacuum. Each set includes the necessary parts to repair the...

The Superlite wheel puts you back in the day of the Trans Am era pony car racing! These wheels were used in the Australian Trans Am Series and have shown not only their beauty but their strength and durability. They will...

The Superlite wheel puts you back in the day of the Trans Am era pony car racing! These wheels are currently used in the Australian Trans Am Series and have shown not only their beauty but their strength and durability. They...

E-Z firewall bracket and rubber boot seal with stainless steel bezel. This bracket and boot kit cleans up the appearance of your firewall and seals out unwanted heat, noise, and fumes from your engine compartment. It can...

1967-69 Camaro and Firbird multi leaf cars and 1967 Ford Ranchero Aldan American TrueLine shocks are designed to work with factory or aftermarket rear end shock absorber setups. The shocks feature 2 in. bodies machined from...

This USB shop manual provides the service technician with complete information for proper servicing. A must for any restoration. Includes every section of the vehicle, including brakes, transmission, electrical, soft trim,...

The Superlite wheel puts you back in the day of the Trans Am era pony car racing! These wheels are currently used in the Australian Trans Am Series and have shown not only their beauty but their strength and durability. They...

This Firewall Rubber Boot Seal features a highly polished 304 stainless steel bezel and hardware and a flexible rubber boot that can accommodate wiring or tubing from 5/16” to 1” in diameter. This boot cleans up the...

Reproduction generator crossover wiring loom for 1963 Ford Falcon and Ranchero models with SBF V8 engines. This harness follows the factory routing to connect the voltage regulator on the left side of the radiator core...

Reproduction Midland dual diaphragm brake booster major repair set. Each set includes the necessary components to bring your booster back to factory specifications. Note: For use on Midland 7-1/2" brake boosters only for...

Reproduction accelerator pedal to fit a variety of 1957-65 Ford and Mercury models. Each pedal is designed to replace the worn, broken or missing original. Produced in injection molded plastic, this pedal is designed for a...

This USB shop manual provides the service technician with complete information for proper servicing. A must for any restoration. Includes every section of the vehicle, including brakes, transmission, electrical, soft trim,...

This Deluxe Dome Light Dimmer upgrades the boring stock dome light system on most Ford vehicles from the 1950s through the 1980s. It provides “fade-in” and “fade-out” functions along with the delay function found on modern...

Reproduction pitman arm for various 1967-70 Ford and Mercury 8-cylinder models with manual steering including Mustang, Falcon, Cougar, and Comet. The pitman arm connects the steering box to the drag link and the rest of the...

Reproduction dual port check valve and grommet set for use with Midland brake boosters only. Includes dual port check valve and rubber grommet. Note: For use on Midland brake boosters only. Ford Applications: 1967-69...

Replacement wheel seal for various 1960-66 Ford models including Mustang, Falcon, Ranch Wagon, and Econoline Van. This premium nitrile oil seal is a direct replacement for select Ford axles. Replaces Ford part# C1DW-1177-A....

The Glen aluminum wheel puts you back in the day of the Trans Am era pony car racing! These wheels are currently used in the Australian Trans Am Series and have shown not only their beauty but their strength and durability....

Replacement cork-rubber oil pan gasket set for various 1960-83 Ford and Mercury models with straight-6 engines including Mustang, Falcon, Bronco, and Comet. This gasket is a direct replacement for Ford 144, 170, 200 L6 engine...

Reproduction engine gauge feed wiring loom for 1964 Ford Falcon and Ranchero models with V8 engines. This engine gauge feed harness plugs into the upper firewall connector and then connects to the brake light switch located...

E-Z firewall rubber boot seal with stainless steel bezel. This boot cleans up the appearance of your firewall and seals out unwanted heat, noise, and fumes from your engine compartment. It can accommodate steering columns...

Reproduction of the original 5-3/4" round Hi-Beam headlamp bulb designed for 1969 Mustang as well as a variety of other Ford models with quad lighting. Features original style FoMoCo script originally found on the tungsten...

Reproduction park lamp housing set for 1964-65 Falcon/Ranchero. Stamped metal housing features anodized finish, pigtail with factory style connector, and socket and comes with gaskets for the lenses. Lens is not included, but...

Customize your Wilwood tandem master with a new billet top cover plate. CNC machined from 6061 Aluminum and engineered to be a direct bolt on using the factory screws. These cover plates are available in either a black...

Replacement innerwheel bearing and race for various 1955-70 Ford and Mercury models including Mustang, Falcon, Cougar, and Ranchero. Sold in sets of 1 bearing and 1 race, 2 sets required per vehicle. Replaces Ford part#...

This short wire harness bolts to the back of the alternator/generator and plugs into the headlamp harness. Features correct color coded wiring.

Firewall Rubber Boot Seal. Features a highly polished 304 stainless steel bezel and hardware and a flexible rubber boot that can accommodate steering columns from 3/4" to 2 1/4" in diameter. This boot cleans up the appearance...

Reproduction of the window regulator for 1960-65 Falcon and Comet 2-door sedan, 2-door wagon, and Ranchero. Produced in steel and cadmium plated for corrosion resistance, each regulator is engineered for a precise fit. If...

Reproduction Midland brake booster rear boot for awide variety of classic American car makes and models. The rubber boot is located at the rear & used to protect the rear of the booster from harmful elements. Note: For use...

Reproduction steering idler arm for 1964-66 Ford and Mercury 8-cylinder models with manual or power steering including Mustang, Falcon, Ranchero, and Comet. Idler arms support the entire steering system by connecting directly...

Billet aluminum exterior door handle for various 1964-77 Ford and Mercury models including Bronco, Falcon, Comet, and Econoline. These precision machined 6061-T6 aluminum door handles have a ½’’ lower profile than stock and...

Customize your Wilwood tandem master with a new billet top cover plate. CNC machined from 6061 Aluminum and engineered to be a direct bolt on using the factory screws. These cover plates are available in either a black...

Reproduction neutral safety switch for 1960-64 Ford Falcon and 1960-64 Mercury Comet models equipped with 2-speed Ford-O-Matic automatic transmission. This switch will work on vehicles with and without backup lamps. It is...

Reproduction park lamp housing set for 1962-63 Falcon/Ranchero. Stamped metal housing features anodized finish, pigtail with factory style connector, and socket and comes with gaskets for the lenses. Lens is not included, but...

Billet aluminum exterior door handle for various 1964-77 Ford and Mercury models including Bronco, Falcon, Comet, and Econoline. These precision machined 6061-T6 aluminum door handles have a ½’’ lower profile than stock and...

Reproduction of the original headlamp bezel designed for 1963 Falcon. These reproduction headlamp doors trim the area around each headlamp. Authentically manufactured to replicate the original in detail for a correct fit and...

Reproduction right hand side front lower quarter panel patch for 1960-63 Ford Falcon and Ranchero. This patch panel is manufactured from heavy-gauge automotive grade sheet metal specifically for this application. The rear...

Firewall Rubber Boot Seal. Features a highly polished 304 stainless steel bezel and hardware and a flexible rubber boot designed to accommodate a variety or brake and clutch arms. Accordion-like design is ideal for insulating...

This USB shop manual provides the service technician with complete information for proper servicing. A must for any restoration. Includes every section of the vehicle, including brakes, transmission, electrical, soft trim,...

Reproduction of the original fan shroud for use with various 1963-66 8 cylinder Ford and Mercury models including Mustang, Ranchero, Falcon and Comet models. Each fan shroud is manufactured to duplicate the original in...

Replacement defroster hose, duct, and cone kit for 1960-65 Ford and Mercury models including Falcon, Ranchero, and Comet. This pair of ducts are made of plastic as opposed to fiberboard for greater longevity and durability.

Intermittent wiper update for 1967-73 Mustangs and various other Ford vehicles. This innovative device utilizes the stock 2-speed wiper switch and motor for a totally stock appearance. It easily installs between the switch...

Turn signal levers takes the brunt of wear and tear, and can fade and chip over the years. This lever is correct for the 1963-65 Falcon, Ranchero, and Comet models that came with an black knob. Some 1963 models require a...

This short wire harness bolts to the back of the alternator and plugs into the headlamp harness. Features correct color coded wiring.

Replacement cork-rubber valve cover gasket for various 1957-77 Ford and Mercury models with 8-cylinder FE engines including Mustang, Cougar, Ranchero, and F-Series Truck. This gasket is a direct replacement for Ford 352, 360,...

Billet aluminum exterior door handle set for various 1964-77 Ford and Mercury models including Bronco, Falcon, Comet, and Econoline. These precision machined 6061-T6 aluminum door handles have a ½’’ lower profile than stock...

Improve the appearance of your door jamb area by replacing your damaged or missing original door opening sill plates (also known as scuff plates) with these high quality reproductions. Each set will replace your originals in...

1964-66 A/C wire harness. Includes fuse.

Reproduction generator crossover wiring loom for 1964 Ford Falcon and Ranchero models with SBF V8 engines. This harness follows the factory routing to connect the voltage regulator on the left side of the radiator core...

Replacement sealed beam halogen headlamp for your burned out original. This halogen bulb is just what you need to keep your headlamps operational and up to date with modern day lighting.

Replacement head gasket set for various 1960-83 Ford and Mercury models including Mustang, Falcon, Comet, and Bronco. These head gasket are designed to work equally well for daily drivers, muscle cars and street rods that use...