Product#: 3864327

Wiring Harness Firewall Retainer Gutter; 13" Long; OER

Reproduction firewall wiring harness gutter for a wide variety of vehicles. This reproduction wire harness gutter holds the engine harness as it passes against the firewall area to protect the wiring harness as it crosses...


Product#: 3779143

1961-64 Impala; Bel Air; Biscayne; and Other GM Fullsize; Steering Column to Firewall Seal, with Automatic Transmission

Reproduction steering column floor seal for 1961-64 Impala, Bel Air and other GM full size models. Each seal is designed to replace the original and includes correct mounting points for installation. Manufactured from...


Product#: 3899593

1967-68 Impala, Bel Air, Biscayne, Caprice; Firewall Carpet Guard; Auto or Manual Trans; with Screws

Reproduction of the original lower steering column to firewall carpet guard designed for use on 1967-1968 Impala, Bel Air, Biscayne Chevrolet models with automatic or manual transmissions. Manufactured in injection molded...


Product#: TF300249

1955-59 Truck, 1955 Car 4-Hole Wire Harness Grommet (Large)

Reproduction of the large 4-hole firewall wire harness grommet for all 1955 Chevrolet cars and 1955-59 Chevrolet and GMC trucks. Can also be used for custom or as a universal fit grommet for other applications. Measures 1...


Product#: TF300217

1957-59 Chevrolet Speedometer Cable Grommet

This grommet mounts on the firewall where the speedometer cable runs through it. Manufactured in automotive grade molded rubber. Replaces OE # 3781684.


Product#: A9711B

NotcHead Firewall Ring Kit Machine Finish

NotcHead 4-piece firewall ring kit for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. This kit comprises of two 3/4?, Two 5/8? and one 1/2?...


Product#: JJ010

Firewall Bracket & Boot w/ Polished Stainless Trim Ring for 1-7/8 - 2 1/8" Steering Columns

E-Z firewall bracket and rubber boot seal with stainless steel bezel. This bracket and boot kit cleans up the appearance of your firewall and seals out unwanted heat, noise, and fumes from your engine compartment. It can...


Product#: A9712B

NotcHead Firewall Ring for 1/2" Heater Hose or AC #6 - Black Anodized Finish

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...


Product#: A9758P

NotcHead Firewall Ring for 5/8" Heater Hose or AC #8 - Polished Finish

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...


Product#: TF400507

1947-59 Chevy Truck, 1955-57 Bel Air, Tri-Five; Firewall Grommet; 4-Hole; Small

Reproduction of the original small 4-hole firewall wire harness grommet for use with all 1950-59 Chevrolet, GMC trucks, and 1955-57 Chevy Bel Air, 150, 210, Nomad models. Manufactured to EPDM rubber to factory specifications....


Product#: 500179

Universal Grommet Fits 1/2" Hole with Single Wire Opening

Sometimes you are forced to punch a hole in your firewall to get additional wires into the engine compartment, but that hole you cut is sharp and can potentially sever wires. To help prevent this, install this universal...


Product#: A9711M

NotcHead Firewall Ring Kit Black Hard Anodized Finish

NotcHead 4-piece firewall ring kit for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. This kit comprises of two 3/4?, Two 5/8? and one 1/2?...


Product#: A9711P

NotcHead Firewall Ring Kit Polished Finish

NotcHead 4-piece firewall ring kit for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. This kit comprises of two 3/4?, Two 5/8? and one 1/2?...


Product#: JJ007

Firewall Boot w/ Polished Stainless Trim Ring for 5/8" to 2-1/4" Steering Columns

E-Z firewall rubber boot seal with stainless steel bezel. This boot cleans up the appearance of your firewall and seals out unwanted heat, noise, and fumes from your engine compartment. It can accommodate steering columns...


Product#: JJ001

1953-80 Firewall Rubber Boot Seal for 3/4" - 2 1/4" Steering Columns w/ Polished Stainless Trim Ring

Firewall Rubber Boot Seal. Features a highly polished 304 stainless steel bezel and hardware and a flexible rubber boot that can accommodate steering columns from 3/4" to 2 1/4" in diameter. This boot cleans up the appearance...


Product#: JJ004

Firewall Rubber Boot Seal for Brake or Clutch Pedal Arm; With Polished Stainless Trim Ring

Firewall Rubber Boot Seal. Features a highly polished 304 stainless steel bezel and hardware and a flexible rubber boot designed to accommodate a variety or brake and clutch arms. Accordion-like design is ideal for insulating...


Product#: JJ005

Firewall Rubber Boot Seal for Wiring, Tubing w/ Polished Stainless Trim Ring

This Firewall Rubber Boot Seal features a highly polished 304 stainless steel bezel and hardware and a flexible rubber boot that can accommodate wiring or tubing from 5/16" to 1" in diameter. This boot cleans up the...


Product#: A9758B

NotcHead Firewall Ring for 5/8" Heater Hose or AC #8 - Black Anodized Finish

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...


Product#: A9734B

NotcHead Firewall Ring for 3/4" Heater Hose or AC #10 - Black Anodized Finish

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...


Product#: A9758M

NotcHead Firewall Ring for 5/8" Heater Hose or AC #8 - Machined Finish

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16? hole with an included...