Product#: 11246

Headlamp Adjusting Screw ; For GM Models ; 1/4"-28 x 2"

Reproduction of the headlamp adjustment screw required for a wide variety of GM models including 1965-75 Impala, Biscayne, Bel Air and Caprice models. This 1/4"-28 adjustment screw comes zinc plated for corrosion resistance...

Product#: A5789

1962-71 GM Headlight 1/4"-28 x 1" Adjustment Screw with Nylon Nut

Original self-retaining nylon nut and 1/4"-28 x 1" screw assembly used for headlamp beam adjustment on 1962-71 GM models. This nut and screw mounts directly to the headlamp housing to enable the headlamp beam to be aimed...

Product#: A3178

GM Headlamp Adjuster Screw And Nut Set - 8 Pieces

Replace damaged or missing headlamp adjusters with these quality reproductions. Each set includes 8 Pieces - (1) adjusting screw, (1) plastic adjusting nut, (2) mounting screws with (2) washers and (2) nuts. 4 sets are...

Product#: TF400533

1955-63 Chevrolet Full Size Headlamp Retaining Ring Spring; Second Design

Reproduction of the original spring used on the headlamp retaining ring spring for various 1955-63 Chevrolet models including Tri-5, Impala and Corvette models. Replaces OE #'s 5946543, 5948814 second design. {fitment}

Product#: 6027292

1964-81 GM, Mopar; Headlight Bucket Tension Spring; Various Models; Each

Plated tension spring for headlight bucket to fit a wide variety of vehicle applications including GM and Mopar models. Closed back design is produced to allow the spring to be installed with a single phillips head screw...

Product#: *B1436

1962-68 Impala and Fullsize; 1/4-28 x 1" GM Headlamp Adjuster Screw With Nylon Nut; 16 Piece Set

Correct reproduction of the headlamp beam adjusting hardware set for various 1962-up GM models. Includes (8) nylon nuts, (8) 1/4"-28 x 1" adjuster screws. Each 16-piece set includes enough adjusters for both the right and...

Product#: A1026

1/4"-28 GM Headlight Beam Nylon Adjuster Nut

This 1/4"-28 headlight beam adjusting nut mounts directly to the headlamp housing and enables the headlamp beam to be aimed correctly. Fits a wide variety of GM vehicles from 1962-on. Use as required. Sold individually....

Product#: 41483

Screw #8 X 1" with #6 Phillips Head Tapping Screws; Chrome; Set of 4

Set of 4 screws used to attach various parts including 1974-78 Mustang II headlamp bezels # 13064P.

Product#: *B1437

1965-75 Impala / Full Size Headlamp Adjuster Screw And Nut Set

Reproduction of the headlamp adjusting hardware required for 1965-75 Impala, Biscayne, Bel Air and Caprice, as well as a variety of additional GM applications. This adjustor set contains the hardware required for proper...

Product#: *596686

1962-68 GM Headlight Adjustment Screw with Nylon Nut 1/4"-28 x 1-1/2"

Original self-retaining nylon nut and 1/4"-28 x 1-1/2" screw assembly used for headlamp beam adjustment on 1962-68 GM models. This nut and screw mounts directly to the headlamp housing to enable the headlamp beam to be aimed...

Product#: 9851

1/4"-28 GM Headlamp Adjuster Nylon Nut

This headlamp adjusting nut mounts directly to the headlamp housing and enables the headlamp beam to be aimed correctly on 1965-75 Impala/Full Size, 1967-77 Camaro and a wide variety of other GM models. White nylon nut is...

Product#: A5788

1/4-28 GM Headlamp Adjuster Nylon Nut

Reproduction 1/4-28 x 1-1/2" headlamp adjuster nylon nut for a wide variety of classic GM vehicles. Will fit various early GM vehicles, including 1967-68 Firebird models. Sold individually. Buick Applications: 1962-68 Full...

Product#: A9400115

1940-81 GM; F-Body / Impala / Nova / Truck - Headlamp Retaining Ring Screw Set (6 Pieces)

Headlamp retaining ring screws are used to hold the headlamp bulb to the mounting bucket.

Product#: L19136

1961 Impala; Bel Air; Biscayne; Headlight Bucket to Bezel Mounting Bracket Set; LH or RH

Replacement headlight bezel to bucket mounting bracket set for 1961 Chevrolet full size models. This kit includes (4) headlight bezel brackets, (4) j-nuts and (8) rivets. Each kit includes the brackets for one inner and one...

Product#: A2303

J Nut #10 Screw Size;.027-.045 Panel Thickness; Phosphate

J Nut #10 Screw Size,.027-.045 Panel Thickness. Center of hole to Edge: 3/16". Phosphate Finish.

Product#: A1459

#10 x 1" Slotted Pan Head Tapping Screw; Zinc Chromate

#10 x 1" slotted pan head tapping screw. Bright Zinc chromate for rust resistance.

Product#: B10963

Headlamp Adjusting Spring - Pair

Product#: 40708

#8-32 x 1/2" Slotted Round Machine Screw; Zinc

#8-32 x 1/2" Slotted Round Machine Screw with Zinc finish used for a variety of purposes including for mounting headlight adjuster brackets. This screw is found in the set headlamp adjuster screw and nut set, part # A3178....

Product#: K6500

1965 Impala / Fullsize Headlamp Bezel Lower Clip

This is a reproduction headlamp bezel lower clip for 1965 GM Impala and full size vehicles. These lower clips are manufactured from injection molded tooling replicating the original in quality, design and fitment. This clip...

Product#: 4919653

1969 Camaro, Impala, Caprice, Corvette; Headlamp Washer Drip Valve Solenoid

Reproduction of the original headlamp washer drip valve solenoid designed for 1969 Chevrolet Camaro, Impala, Bel Air, and Caprice models. This solenoid works in conjunction with the washer pump and motor. It bolts to the...