Product#: 3415

Bumper Bolt with Conical Keps Hex Nut; Polished Stainless Steel Capped Head; 3/4" Diameter; 3/8-16" x 1"; Zinc Plated

Reproduction GM bumper bolt for a variety of General Motors and Chrysler applications. Each zinc-plated steel carriage bolt features a polished stainless steel cap for superb cosmetic appearance, corrosion resistance and long...


Product#: 3822

Bumper Bolt with Conical Keps Hex Nut; Polished Stainless Steel Capped Head; 7/8" Diameter ; 3/8-16 x 1-1/2"; Zinc Plated

Reproduction bumper bolt for a variety of General Motors applications. Each zinc-plated steel carriage bolt features a polished stainless steel cap for superb cosmetic appearance, corrosion resistance and long life. Each bolt...


Product#: A1017

3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each

Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...


Product#: A15043

Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1-3/64" Stem Length; For 1/2" Hole

Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold individually. Use as required. Replaces...


Product#: 8557

Bumper Bolt with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1" Bolt with Hex Nut

Reproduction bumper bolt with hex nut manufactured in zinc plated material offering an authentic appearance and fitment. Measures 7/16" -14 x 1" and features a stainless steel cap. Head diameter 31/32". Each bolt will...


Product#: *C15323

Plastic Retainer Set; Push-In Type; 1" Head Diameter; For 1/2" Hole; GM # 473798, 5930892, 5973400; Clear; 25 Pieces

Correct style push-in clear retainer clip designed for use with various GM applications including 1979-2002 Camaro and 1976-2002 Firebird models. Manufactured to replicate the original GM design in a clear injection molded...


Product#: TF400727

Bumper Bolt and Hex Nut; with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1-1/4"

Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...


Product#: 153999B

License Plate Bracket; Flip Up / Down Style; Also Used For Trucks and Street Rods With Custom Roll Pans

License plate bracket commonly used on trucks or street rods with custom rear roll pans. This bracket is an original style exact replacement for the bracket on 1981-87 Buick Regal models. Can be used on a wide variety of...


Product#: *C15322

Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1/2" Hole; GM # 14103461; 25 Pieces

Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold in set of 25 pieces. Use as required....


Product#: OER29

Original Equipment Reproduction License Plate

Put a highly visible accent on your restoration with a quality aluminum OER« license plate, a recognized symbol of originality and authenticity.


Product#: TR17758B

3/8"-16X 15/16"; Bumper Bolt; Stainless Steel Cap; Flat Head; Package of 25

Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...


Product#: 3989

7/16" SAE Flat Washer 15/32" ID; 15/16" OD; Zinc

7/16" SAE flat-washer used in a variety of applications including on bumper brackets among many other uses. 7/16" Medium Flat Washer plated in zinc for corrosion resistance. Specifications Finish: Zinc For Bolt Size:...


Product#: A1024

1/2 Hole Plastic Nut

Correct nuts needed to mount the valance panel to the lower grill on 1969 Camaro models and needed to attach the license plate to the bracket on 1970-81 models. Fits a wide variety of additional GM models as well. Replaces OE...

1/2 Hole Plastic Nut

MSRP $1.99 ea
Classic $1.69 ea

Product#: A1960

1958 Impala / Full-Size Passenger Car; Rear License Plate Bumper Filler Panel; Gray Powdercoat

This is a high quality reproduction of the original license plate panel (also called a rear bumper filler panel), for 1958 Impala and other Chevrolet full size passenger car models. This reproduction comes with the correct...


Product#: A401

Black License Plate Frame with Clear Lens and 4 Mounting Holes

This license plate frame attaches to your plate in the normal manner but has a clear acrylic lens with a rubber gasket that goes between the frame and plate to help keep the license plate clean. Includes mounting hardware....


Product#: EU1031B

3D Stainless Style-Tags™ License Plate with Mirror Bow Tie

This Stainless Style license plate features 3-dimensional acrylic logo on gorgeous mirror finish stainless-steel. Each plate is carefully crafted by hand using the finest high-impact acrylic materials and mirror polished...


Product#: EU1031A

3D Stainless Style-Tags™ License Plate with Black Bow Tie

This Stainless Style license plate features 3-dimensional acrylic logo on gorgeous mirror finish stainless-steel. Each plate is carefully crafted by hand using the finest high-impact acrylic materials and mirror polished...


Product#: EU1032B

3D Stainless Style-Tags™ License Plate with Red Bow Tie Over Mirror Chevrolet Lettering

This Stainless Style license plate features 3-dimensional acrylic logo on gorgeous mirror finish stainless-steel. Each plate is carefully crafted by hand using the finest high-impact acrylic materials and mirror polished...


Product#: EU1031C

3D Stainless Style-Tags™ License Plate with Gold Bow Tie

This Stainless Style license plate features 3-dimensional acrylic logo on gorgeous mirror finish stainless-steel. Each plate is carefully crafted by hand using the finest high-impact acrylic materials and mirror polished...