Product#: TK273

1958 Chevrolet Impala / Full-size - Ignition/Door/Trunk Lock Set With Original Style Key

Lock set designed to replace your ignition, door and trunk lock assemblies. Each set is supplied with "coded" cylinders and 2 pre-cut keys which will fit the new door, ignition and trunk lock cylinders.


Product#: TK178A

1958 & 63 Full Size Chevrolet Door, Glove And Trunk Lock Set With Original Style Key

This comprehensive set will allow you to replace all the major lock cylinders (door, glove box and trunk) using just one pre-cut key. Each set is a convenient and easy way of replacing your original locks without going...


Product#: TK178

1958 & 1963 Full Size Chevrolet Door, Glove And Trunk Lock Set With Late Style Key

This comprehensive set will allow you to replace all the major lock cylinders (door, glove box and trunk) using just one pre-cut key. Each set is a convenient and easy way of replacing your original locks without going...


Product#: TK160A

1958 & 61-64 Full Size Chevrolet Ignition/Door Lock Set With Original Style Key

Complete set to replace ignition and door locks on 1958 & 61-64 Full size models. Includes two original style pre-coded keys, Includes two original style pre-coded keys, retainers and gaskets. and gaskets.


Product#: TK246

1955-58 & 61-64 Full Size Chevrolet Door/Trunk Lock Set With Original Style Key/Flat Pawl

This lock set for your doors and trunk includes 2 door lock cylinders, trunk lock and 2 pre-cut keys. Lock cylinder retainers which are used to hold the lock cylinder in place, and gaskets are also included.


Product#: TK140

1958 & 61-64 Full Size Chevrolet Door/Trunk Lock Set With Late Style Key

This lock set for your doors and trunk includes 2 door lock cylinders, trunk lock and 2 pre-cut keys. Lock cylinder retainers which are used to hold the lock cylinder in place, and gaskets are also included.


Product#: TK245

1955-58 Full Size Chevrolet Door Lock Set With Original Oval Style Key And Flat Pawl

Replace your old outer door lock cylinders with these correct replacement type assemblies. Each pair of cylinders include 2 pre-cut keys for easy and fast installation.


Product#: TK110A

1958, 1962-64 Full Size Chevrolet Door Lock Set With Original Style Key

Replace your old outer door lock cylinders with these correct replacement type assemblies. Each pair of cylinders include 2 pre-cut keys for easy and fast installation. Lock cylinder retainers which are used to hold the lock...


1955-64 GM Full Size Passenger Car; 1956-66 Corvette; Door Lock Pawl; Flat Design; Fits Short Shaft Cylinders;  LH or RH
NEW

Product#: 320102

1955-64 GM Full Size Passenger Car; 1956-66 Corvette; Door Lock Pawl; Flat Design; Fits Short Shaft Cylinders; LH or RH

Reproduction door lock pawl for various 1955-64 GM full size passenger car models. This is the lever that mounts to the back of the door lock cylinder allowing the door latch assembly to be activated when the key is turned....


1955-64 GM Full Size Passenger Car; 1956-66 Corvette; Door Lock Pawl Retainer Clip; Fits Original Door Lock Cylinders; Trident Shape; LH or RH
NEW

Product#: PR932

1955-64 GM Full Size Passenger Car; 1956-66 Corvette; Door Lock Pawl Retainer Clip; Fits Original Door Lock Cylinders; Trident Shape; LH or RH

Reproduction door lock pawl retaining clip for various 1955-64 GM passenger car models. This trident shaped clip retains the door lock pawl to the door lock cylinder. This style clip is used with original GM door locks that...


Product#: TK423

1958 Full Size Chevrolet Ignition, Door (Short Cyl), Glove & Trunk Lock Set With Original Style Key

This Lock set is designed to replace your ignition, door, glove box and trunk lock assemblies. Set includes: 1 ignition switch lock cylinders 2 short door lock cylinders 1 glove box cylinder 1 t runk lock cylinder 2...


Product#: TK422

1958 Full Size Chevrolet Ignition, Door (Long Cyl), Glove & Trunk Lock Set With Original Style Key

This Lock set is designed to replace your ignition, door, glove box and trunk lock assemblies. Set includes: 1 ignition switch lock cylinders 2 long door lock cylinders 1 glove box cylinder 1 tr unk lock cylinder 2...


Product#: TK272

1958 Chevrolet Impala / Full-size - Ignition/Door/Trunk Lock Set With Original Style Key

Lock set designed to replace your ignition, door and trunk lock assemblies. Each set is supplied with "coded" cylinders and 2 pre-cut keys which will fit the new door, ignition and trunk lock cylinders.


Product#: TK140A

1958 & 61-64 Full Size Chevrolet Door/Trunk Lock Set With Original Style Key

This lock set for your doors and trunk includes 2 door lock cylinders, trunk lock and 2 pre-cut keys. Lock cylinder retainers which are used to hold the lock cylinder in place, and gaskets are also included.


Product#: TK1016

1958, 1961-64, 1970-78 GM; Door Lock Set; with 3/4" Long Shaft

Complete door lock set designed to replace old or won out lock assemblies on various GM models as listed. Each set is produced with 2 "coded" cylinders, gaskets, retainers, door lock pawls and 2 pre-cut keys. Note: Fits 1970...


1955-64 GM Full Size Passenger Car; 1956-66 Corvette; Door Lock Pawl; Flat Design; Fits Original Door Lock Cylinders;  LH or RH
NEW

Product#: PR589

1955-64 GM Full Size Passenger Car; 1956-66 Corvette; Door Lock Pawl; Flat Design; Fits Original Door Lock Cylinders; LH or RH

Reproduction door lock pawl for various 1955-64 GM passenger car models. This is the lever that mounts to the back of the door lock cylinder allowing the door latch assembly to be activated when the key is turned. This pawl...


Product#: A20675

Nylon Rod Clip, Fits 5/32" Rod Diameter, RH, 1/4" Hole Size

Reproduction of the clip that retains the two inner door lock rods. This nylon clip joins the horizontal rod from the door latch with the verticle rod that the door lock knob screws on to. Sold individually. One required per...


Product#: GN110663

1955-87 GM Car and Truck; Door Lock Pawl; Half Moon Style; Fits Short D-Shaped Shaft

Door lock pawl retainer for various 1955-64 GM passenger car and 1967-91 GM truck models. Mounts at the end of lock cylinder firmly holding the pawl/lever in place. Fits the short shaft D-shaped lock cylinders. LH or RH.


Product#: PR6512

1958-64 GM Car and Truck; Door Lock Pawl; U-Shape Style; Fits Long Style Shaft

Door lock pawl retainer for various 1958-64 GM passenger car models. Mounts at the end of lock cylinder firmly holding the pawl/lever in place. Fits the long shaft lock cylinders. LH or RH.


Product#: K940

1955-90 GM; Door Lock Gasket; Various Models

Reproduction of the original door lock gasket designed for use on various GM models including the listings below. After repainting your doors, or whenever replacing door locks, be sure to install new lock cylinder gaskets to...