Product#: GW596401

1959-64 Impal/Full Size Power Steering Upgrade And Bump Steering Kit

Global West Suspension's power steering upgrade system for 1959-64 Impala/fullsize models. This kit fixes the bump steer. Bump steer is a condition that creates wander when you go over bumps or when the car leans. Many...


Product#: GW842

1958-64 Impala / Full Size Rear Tubular Lower Control Arms

Tubular rear lower control arms are designed to be a direct replacement of the stock arms and reduce the twisting loads at the frame bracket location. One of the weak links in the rear suspension is the frame bracket to...


Product#: GW850

1958-64 Impala / Full Size; 3/4" Drop; Rear Coil Springs; Small Block and Big Block

Full size Chevrolets are known for excessive roll and oscillation, especially after bumps. Shocks and sway bars can help reduce the problem, but to correct the problem entirely, correct springs are required. These coil...


Product#: GW1030

1958-70 Impala / Full Size Del-A-Lum Upper Control Arm Bushing Set

These Del-a-lum bushings are the top-of-the-line when it comes to suspension control and longevity. They are a direct replacement for rubber or polyurethane control arm bushings. These bushings feature inner and outer...


Product#: GW830

1958-64 Impala; Bel Aior; Biscayne; Performance 1" Drop Front Coil Springs; Small Block Applications; LH and RH

Full size Chevrolets are known for excessive roll and oscillation, especially after bumps. Shocks and sway bars can help reduce the problem, but to correct the problem entirely, correct springs are required. These coil...


Product#: GW846

1959-64 Impala / Full Size Rear Frame Support; LH

This support is designed to add strength to the rear frame crossmember. The crossmember holds the attachment points for the rear upper control arm(s) depending on your frame. During hard acceleration, the upper control arm...


Product#: GW90

1958-64 Impala / Full Size Tubular Tie Rod Adjust Sleeves

Tubular tie rod adjusting sleeves replace the standard split sleeve tie rod adjusters located between the inner and outer tie rods. The sleeve is stronger than stock because of full thread engagement. The tie rod sleeves...


Product#: GW941

1959-64 Impala/Full-Size Chevrolet - Rear Anti-Squat Bracket

Making the car have better traction is what this is all about. The anti-squat bracket changes the geometry of the rear suspension by providing a different angle on the upper control arm. By changing this angle, the load...


Product#: GW841

1958-64 Impala / Full Size Front Tubular Lower Control Arms

From Global West Suspension the G-Plus tubular control arms changes the way the car drives and performs. The wander and vague road feel is dramatically improved, even though it?s through the stock steering components. The...


Product#: GW84

1958-64 Impala / Full Size Front Tubular Upper Control Arms

From Global West Suspension the G-Plus tubular upper control arms for 1958-64 full size models changes the way the car drives and performs. The wander and vague road feel is dramatically improved, even though it?s through the...


Product#: GW843

1958-64 Impala / Full Size Adjustable Rear Panhard Bar And Bracket Set

Lateral location of the rear end has always been a problem. This is due to the angle of the panhard bar at ride height. Raising or lowering the ride height shifts the rear end laterally away from the center of the car,...


Product#: GW95

1959-64 Impala / Full Size Heavy Duty Rear Adjustable Upper Control Arm

This heavy duty adjustable upper control arm has a spherical bearing on both ends of the control arm. This double bearing designed arm allows you to adjust pinion angle without using the old style shims. The bearings are...


Product#: GW1055

1958-64 Impala / Full Size Lower Control Arm Bushings

These Del-a-lum bushings are the top-of-the-line when it comes to suspension control and longevity. They are a direct replacement for rubber or polyurethane control arm bushings. These bushings feature inner and outer...


Product#: GW848

1958-64 Impala / Full Size With Big Block Front Coil Springs

Full size Chevrolets are known for excessive roll and oscillation, especially after bumps. Shocks and sway bars can help reduce the problem, but to correct the problem entirely, correct springs are required. These coil...


Product#: GW94

1959-64 Impala / Full Size Rear Adjustable Upper Control Arm

This adjustable upper control arm has a rubber bushing on the rear end side and a spherical bearing on the frame side. The arm allows you to adjust pinion angle without using the old style shims. The spherical bearing...


Product#: GW844

1958-64 Impala, Bel Air, Biscayne; Adjustable Rear Panhard Bar

Lateral location of the rear end has always been a problem. This is due to the angle of the panhard bar at ride height. Raising or lowering the ride height shifts the rear end laterally away from the center of the car,...


Product#: GW847

1959-64 Impala / Full Size Rear Frame Support; RH

This support is designed to add strength to the rear frame crossmember. The crossmember holds the attachment points for the rear upper control arm(s) depending on your frame. During hard acceleration, the upper control arm...


Product#: GW845

1958-64 Impala / Full Size Adjustable Rear Panhard Bar Mount Bracket

Lateral location of the rear end has always been a problem. This is due to the angle of the panhard bar at ride height. Raising or lowering the ride height shifts the rear end laterally away from the center of the car,...