1959 Oldsmobile 98 Parts - Weatherstrip

Replace your convertible side frame weatherstrip with this superb reproduction top frame weatherstrip. Each set will provide the necessary weatherstrip that attaches to the convertible top frame and seals the area between...

One pair of Quarter window vertical weatherstrips for a wide array og GM makes and models. These are the pieces which mount on the leading edge of the rear quarter window and seal the back of the door glass to the quarter...

Reproduction of the original trunk weatherstrip manufactured in the correct configuration. Prevent water damage in your trunk area by replacing the worn and damaged weatherstrip with this authentic reproduction. The soft...

Reproduction 1959 GM full size vehicle front door vent window weatherstrip set. This weatherstrip set is a four (4) piece set that contains the main vent window seals and division post seals. Set is for Left & Right Hand. Replaces GM# 4304456, 4304457. Chevrolet Applications 1959 Bel Air, 2 & 4 door Sedan 1959 Biscayne 2 & 4-door Sedan 1959 Biscayne 2-door Delivery & Utility Sedan 1959 Brookwood 2 & 4-door Wagon 1959 El Camino 2-door Std Cab Pickup 1959 Impala 4-door Sedan 1959 Kingswood 4-door Wagon 1959 Nomad 4-door Wagon 1959 Parkwood 4-door Wagon Buick Applications: 1959 Electra 4-door Sedan 1959 Invicta 4-door Sedan 1959 Invicta 4-door Wagon 1959 LeSabre 2 & 4-door Sedan 1959 LeSabre 4-door Wagon Oldsmobile Applications: 1959 Dynamic 2 & 4-door Sedan 1959 Dynamic 4-door Wagon 1959 98 4-door Sedan 1959 Super 88 4-door Sedan 1959 Super 88 4-door Wagon Pontiac Applications: 1959 Bonneville 4-door Wagon 1959 Catalina 2 & 4-door Sedan 1959 Catalina 4-door Wagon 1959 Star Chief 2 & 4-door Wagon

Door edge weatherstrip with molded corners. Rear door seal of a 4-door full size GM Vehicle. This part is the primary seal of the door to the body. Chevrolet Applications 1959-60 Chevrolet Bel Air 4-door Sedan, 6...

Rear door weatherstrip is designed from the original part for superior fitment and seal. This seal mounts around the front, bottom and rear of the door using pro-installed clips. Molded as left and right with pre-installed...

Reproduction of the original style weatherstrip clip receiver designed for use on 1958-71 GM models. These small plugs are inserted into the door and provide a mounting point for the door frame weatherstrip clips to insert...

Reproduction of the original style weatherstrip clip receiver designed for use on 1958-71 GM models. These small plugs are inserted into the door and provide a mounting point for the door frame weatherstrip clips to insert...

Rear window gasket mounts around the full perimeter of the back glass and has properly molded corners for precise factory fit. This also has the slot to accept the outer edge’s decorative molding. Chevrolet Applications ...

Reproduction rear quarter stationary vent window weatherstrip for GM full size vehicles, LH and RH. This gasket is for the triangular window just behind the rear door window on 4-door post sedans. Replaces GM# 4758238. ...

Quality reproduction of the original roof rail weatherstripping designed for 1959-60 Impala and Full size GM models. This quality reproduction seals the area between the roof rail and the door glass eliminating water and...

Reproduction of the original style weatherstrip clip receiver seal designed for 1958-71 GM models. These small plugs are inserted into the door and provide a mounting point for the door frame weatherstrip clips to insert...

Reproduction of the original quarter window vertical weatherstripping designed for 1958-64 Impala, Bel Air, Electra, Le Sabre, El Dorado, and other Full Size GM models as listed. This high quality reproduction is manufactured...

Reproduction of the original rubber seal designed to replace the windshield weatherstrip on 1959-60 GM Full Size models. This windshield seal is designed for use on 2 or 4 door sedan and wagon models as listed. This...

Reproduction of the original rubber seal designed to replace the windshield weatherstrip on 1959-60 GM Full Size models. This windshield seal is designed for use on 2 or 4 door sedan models as listed. This gasket works with...

This rear window seal is for the 2 door hardtop models only. Manufactured from ozone resistant EPDM rubber from the same factory specifications as the original for an authentic fit and finish. This item is designed to be...

Reproduction cowl side drain gutter for GM full size vehicles, LH and RH. These pieces attach to the bottom of each of the pillar posts to keep water out of the door area. Rubber with metal core as original. Eleven...

Door pillar bumper for 1959-60 Oldsmobile Holiday Coupes and convertibles. Also used on 1959-64 Cadillac models except Series 75, and 1959-64 Buicks. Measures 1-15/16 inches by 1 inch; fits into a rectangular slot. Sold...

Correct reproduction of the U-shape rubber molded weatherstrip for your GM full size 2-Door Hardtop. This seal attaches to the door jamb area under the quarter window vertical weatherstrip and seals the door jamb quarter...

Door lock pillar bumper for some 1959-64 Oldsmobile models, 1959-64 Buicks, and 1959-64 Cadillacs except Fleetwood 75. Similar in design to part # 156459 but shorter; measures 1 inch by 1 inch. Self retained, fits into a...

Starter Cable Boot for 1954-1960 Oldsmobile 88, Dynamic, Super, Fiesta and 98 models, Also 1932-1953 Buick models and other various 1954-1972 GM models as required.

Reproduction of the original convertible top header seal for use with 1958-64 GM converible models including Chevrolet, Buick, Pontiac and Oldsmobile models. Each header seal is manufactured to original specifications and...

Reproduction of the original trunk lock cylinder gasket designed for use on various GM models. This gasket is used to seal the trunk lock cylinder to the body. Manufactured in quality EPDM molded rubber that replicates the...

Rubber 'cap' that attaches to the top of the door jamb windlace on many 1930's to 1960's Oldsmobile, Buick and Cadillac convertibles and two door hardtops. A piece which is often missing or deteriorated. Sold in pairs.

Correct OER® reproduction of the original trunk lid rubber bumpers designed for use with various 1960-72 GM models. Manufactured to factory specifications including correct stud to adjust for height concerns. Eliminates the...

Reproduction of the original rear rocker panel flaps for use on various Buick, Chevrolet, Pontiac, and Oldsmobile models. Once installed, these flaps will help prevent road splash and debris from entering and blocking the...

Reproduction 5/16-18 x 1-1/2" hood bumper. Includes correctly threaded stud with a 1" diameter x 1/2" tall round rubber top. Helps keep the hood aligned when installed. Can be adjusted higher or lower. 2 hood adjust bumpers...

Eliminate the rattling and looseness of the glove box or console door by simply replacing worn out or missing rubber stoppers with these high quality reproduction rubber stoppers. Designed for use with a variety of 1938-1991...

Precision's weatherstrip lube significantly reduces friction, thereby reducing the installation force required to assemble parts & fittings. Helps to avoid injuries related to slippage and repetitive stress, reduces rejects,...

3M auto sealer is a black flowable product for installing weatherstrip that requires glue, or repairing leaks between glass and rubber or metal surfaces. Permanently seals windshields, back glass and other places where...

This universal hook tool has a small, round steel ball on the end. Once the steel ball is inserted down into the rubber gasket, it is very difficult for it to come out. If it should slip out of the gasket, there is less of a...

The lockstrip insert tool is is specifically designed for self-sealing two-piece rubber weatherstripping. The eye of the tool threads locking strip into the groove and inserts it into the channel.

Reproduction roof rail weatherstrip channel screw set for 1970-81 Camaro, Firebird, and other various GM models. These screws feature the correct style large head that is required for mounting coupe weatherstrip channels. #8...

Replacement style self-tapping screws designed to attach the weatherstrip channels on 1962-67 Chevy II/Nova, 1967-69 Camaro. and 1967-69 Firebird coupe or convertible models. These screws feature the large head that is...

This reproduction door weatherstrip clip is used on most GM vehicles which require plastic push in clips. These hook into holes in the door rubber weatherstripping and hold the weatherstrip to the door. Also used on Most GM...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16” hole with an included...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16” hole with an included...

NotcHead 4-piece firewall ring kit for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. This kit comprises of two 3/4”, Two 5/8” and one 1/2”...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16” hole with an included...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16” hole with an included...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16” hole with an included...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16” hole with an included...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16” hole with an included...

NotcHead 4-piece firewall ring kit for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. This kit comprises of two 3/4”, Two 5/8” and one 1/2”...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16” hole with an included...

NotcHead 4-piece firewall ring kit for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. This kit comprises of two 3/4”, Two 5/8” and one 1/2”...

NotcHead firewall rings for heater and air condoning hoses. Install these threaded rings in firewalls, inner fenders, or bulkheads of a variety of thicknesses. All three sizes attach through a 1-5/16” hole with an included...

Correct staple to install fender skirt splash aprons for various models. 1/2" wide, 1/2" deep.

Professional windshield removal tool designed for use with all vehicle applications. Features an aluminum handle with diamond cut pattern for added grip. Heavy duty braided wire secures the pull handle to the cutting blade. ...

When it comes to relining the door and quarter window channels, this Mohair liner material is what you'll need. A finely textured mohair lining material with a rubberized backing. Inside the door, there are "U" shaped...

Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...

Reproduction of the original small 4-hole firewall wire harness grommet for use with all 1950-59 Chevrolet, GMC trucks, and 1955-57 Chevy Bel Air, 150, 210, Nomad models. Manufactured to EPDM rubber to factory specifications....

Reproduction of the large 4-hole firewall wire harness grommet for all 1955 Chevrolet cars and 1955-59 Chevrolet and GMC trucks. Can also be used for custom or as a universal fit grommet for other applications. Measures 1...

When it comes to relining the door and quarter window channels, this Mohair liner material is what you'll need. A finely textured mohair lining material with a rubberized backing. Inside the door, there are "U" shaped...

Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...

OER butyl rubber sealant for installing front windshield or back glass installation. Can be used on virtually all models of Chrysler, GM, and Ford that did not use a contoured molded style weatherstrip for installation of the...

Use the rope in tool when working with rubber gasket set glass. The unique counter-grip plastic handle injects the rope through its stem as it is pulled around the gasket. There is plenty of enough durable rope to fit around...

This reproduction firewall pad fastener is designed to hold the firewall insulation pad in place on various 1955-81 General Motors models. Each fastener is manufactured from EPDM rubber replicating the original configuration...

Replacement glass setting tape for various models. This glass tape holds glass firmly and permanently. Seals against dirt, moisture, and will not stretch out of shape. Just fold it over the glass edge, insert glass in the...