Product#: 14927

Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each

Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...

Product#: 3078A

1961-66 Ford/Mercury; Mustang/Falcon/Ranchero/Comet; Front Lower Control Arm Assembly; LH Or RH

Reproduction from lower control arm and ball joint assembly for various 1961-66 Ford and Mercury vehicles including Mustang, Falcon, Ranchero, and Comet. This control arm assembly is a direct fit replacement and includes the...

Product#: 3082BR

1966-73 Ford/Mercury; Mustang/Falcon/Cougar/Comet; Front Upper Control Arm Assembly; LH Or RH

Front upper control arm assembly for Various 1966-73 Ford and Mercury models including Mustang, Falcon, Cougar, and Comet. The upper control arm connects the wheel spindle to the chassis providing a smooth up/down suspension...

Product#: 154632

Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion

Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...

Product#: 5705AR

1964-66 Mustang Leaf Spring U-Bolt

Reproduction rear leaf spring U-bolts for 1964-66 Mustang models. Two required per spring. Reproductions come with deep nuts and washers. {Fitment} {specs}

Product#: 5705BR

1967-73 Mustang Leaf Spring U Bolt

Reproduction of the original U-bolt designed for use on 1967-73 Muatangs. Each U-bolt is designed to replace the worn out or broken original. Includes U-Bolt and attaching deep nuts and washers. 2 U bolts required per leaf...

Product#: 3047A

1961-77 Ford/Mercury; Upper Control Arm Shaft and Bushing Kit

Upper control arm shaft and bushing kit for various Ford and Mercury models including Mustang, Falcon, Ranchero, and Comet. This kit includes the shaft, bolts, and zerk fittings. Fits driver or passenger sides. 2 sets...

Product#: 3049B

1964-77 Mustang, Falcon, Cougar, Comet; Upper Ball Joint; 3-Bolt ; RH or LH; Each; Various Models

Reproduction of the original style 3-bolt upper ball joint designed for use with various 1964-77 Ford and Mercury models including Mustang, Falcon, Cougar, and Comet. This ball joint attaches to the upper control arm and...

Product#: 5630K

1966-73 Ford Fairlane, Falcon, Ranchero, Mercury Capri, Comet; Rear Leaf Spring Shackle; Rear Eyelet; LH or RH Side; Each

Reproduction rear leaf spring shackle designed for the rearward eyelet of the leaf spring on various 1966-71 Ford and Mercury models including Torino, Ranchero, Comet, and Falcon Wagons. This rear shackle kit includes 2...

Product#: W1006

1964-2000 GM; Front Coil Spring to Frame Rubber Insulator; 1/4" Thick; LH or RH; Various Models; Each

Reproduction molded rubber front coil spring insulator that mounts between the coil spring and the frame on various 1949-96 vehicles. This insulator keeps the spring from riding metal-to-metal on the frame. Coil spring...

Product#: 154895

1968-73 Comet, Falcon, Ranchero, Torino, 1970-73 Mustang; Disc Brake Spindles; Large Bearing Style; OE for 1970-73 Models

Reproduction OE-style large bearing heavy duty disc brake spindles for 1970-73 Ford Mustang. They are manufactured with modern steel alloys for improved durability and strength over the original spindles. These high quality...

Product#: 5630DR

1964-73 Mustang, Falcon, Cougar; Leaf Spring Shackle Assembly; Rear of Rear Spring; LH or RH; Each

Reproduction of the original rear leaf spring shackle kit for 1964-73 Mustang and various other Ford and Mercury models. This rear shackle kit includes two piece shackle, four rubber bushings and two nuts. Each vehicle...

Product#: 5483G

1966-70 Ford, Mercury; Various Models; Front Sway Bar Kit; 1" O.D.; with Hardware

Replacement 1? O.D. front stabilizer bar for various Ford & Mercury applications including Mustang, Falcon, Comet, and Cougar. Sway bars are designed to reduce body roll and understeer resulting in safer, more balanced...

Product#: 154891

1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair

Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...

Product#: 5415

1964-77 Mustang/Ford Replacement Rubber Front Upper Coil Spring Insulator

Reproduction rubber front upper coil spring isolator for 1964-73 Mustangs, 1964-65 Comet and 1964-70 Falcon. This isolator installs between the front coil spring and the shock tower reducing noise and restoring ride quality....

Product#: A15589

Hex Nut 7/16-14

Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell Hardness :...

Product#: 3082AR

1963-66 Ford/Mercury; Mustang/Falcon/Ranchero/Comet; Front Upper Control Arm Assembly; LH Or RH

Front upper control arm assembly for Various 1963-66 Ford and Mercury models including Mustang, Falcon, Ranchero, and Comet. The upper control arm connects the wheel spindle to the chassis providing a smooth up/down...

Product#: FSB904

1974-78 Mustang II 3/4" Front Sway Bar; Measures 43-1/4" Wide; For Standard Crossmember

Replacement 3/4" sway bar kit for hot rods and custom trucks running standard width crossmember Mustang II front suspension. Designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved...

Product#: 16A052

1964-70 Ford Mustang; Export Brace; Black

Correct reproduction of the original export brace for use with 1965-70 Mustang, Falcon, Comet, and Cougar models. The export brace is originally designed for use on the GT350 model. This component braces the shock towers...

Product#: 154633

1964-70 Mustang, 1967-70 Cougar; Frame Rail Chassis Boxing Plates; Weld-In; For Mustang II IFS Front Suspension Conversion

Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...