Product#: H1112

1973-76 Mopar A-Body Hotchkis Tubular Upper Control Arms With Big Ball Joints

Install the geometry corrected Hotchkis Tubular Upper A-Arms and gain vastly increased handling and control. These 100% TIG welded, bolt-on arms offer an improved camber curve and increased caster. Features: TIG welded...


Product#: H1112S

1967-72 Mopar A-Body Hotchkis Tubular Upper Control Arms With Small Ball Joints

Install the geometry corrected Hotchkis Tubular Upper A-Arms and gain vastly increased handling and control. These 100% TIG welded, bolt-on arms offer an improved camber curve and increased caster. Features: TIG welded...


Product#: *MM8186

1960-76 Mopar A-Body Upper Control Arm Mounts

If you are having difficulty maintaining proper front end alignment, be sure to check the mounting points for your suspension. This set is a direct replacement for the control arm located in the "horseshoe". We have found...


Product#: MN42200

1960-76 Mopar A / B / E-Body Adjustable Strut Rods

These adjustable strut rods allow you to adjust caster back to the factory settings which is lost when using polyurethane bushings on stock strut rods. Manufactured from 3/4", 1144 stress-relieved, cold drawn steel with...


Product#: SP94460

1972-76 Mopar A-body - Adjustable Upper Control Arm - RH

1972-76 Mopar A-Body adjustable control arm. These fully-adjustable upper control arms can transform your classic Mopar from sluggish, unresponsive handling to high performance fun! Dial in additional positive caster, adjust...


Product#: H3005

1965-76 Mopar A-Body Hotchkis Sport Suspension Pivot Shaft Set

The Hotchkis Sport Suspension Pivot Shaft set, replaces your worn out, sloppy handling lower control arm pivot shafts. Designed to be a direct fit for your stock originals, these shafts are a grease-able design. The grease...


Product#: K7030B

1960-76 Mopar A/B/E-Body; Front Upper Control Arm Bushings and Eccentric Bolts

Restorer's Choice™ premium replacement upper alignment caster/camber kit. Each alignment caster/camber kit includes (2) upper control arm bushings, (2) eccentric bolts, (2) large eccentric bolt washers, (2) lock...


Product#: MN3162

1960-76 Mopar Lower Control Arm Bump Stop Spacers

Reproduction lower control arm bump stop spacers for all 1960-76 models. These spacer were used on models with 15" wheels, to prevent the front end from bottoming out.


Product#: 99103R

1962-76 Mopar A / B / E-Body Red Polyurethane Upper Control Arm Bumper Stop

Replace those broken or missing control arm bumper stops with new polyurethane bumper stops. Sold as a pair. Made in USA Applications: A-Body 1 962 Lancer 1962-76 Valiant 1963-76 Dart 1964-69 Barracuda ...


Product#: 99119R

1962-76 Mopar A / B / E-Body Red Polyurethane Lower Control Arm Bumper Stop

Replace those broken or missing control arm bumper stops with new polyurethane bumper stops. Sold as a pair. Made in USA Applications: A-Body 1 962 Lancer 1962-76 Valiant 1963-76 Dart 1964-69 Barracuda ...


Product#: MM52307

1964-76 Mopar A-Body; QA1 Performance Tubular Lower Control Arms; LH and RH

QA1 lower control arms are a direct bolt-on for factory or QA1 K-members and are twice as strong as factory arms. These are ready to bolt-on to your Mopar. Feature tubular construction and black powdercoating. The set...


Product#: MM52303

1964-72 Mopar A-Body; QA1 Performance Tubular Upper Control Arms; With Small Ball Joints; LH and RH

Engineered for strength, the QA1 upper control arms offer a great solution to factory control arms without adding weight. These control arms feature tubular construction, black powdercoating, polyurethane bushings and include...


Product#: MM52301

1964-72 Mopar A-Body; 73-76 A-Body; QA1 Performance Tubular Upper Control Arms; With Large Ball Joints; LH and RH

Engineered for strength, the QA1 upper control arms offer a great solution to factory control arms without adding weight. These control arms feature tubular construction, black powdercoating, polyurethane bushings and include...


Product#: SP94461

1972-76 Mopar A-body - Adjustable Upper Control Arm - LH

1972-76 Mopar A-Body adjustable control arm. These fully-adjustable upper control arms can transform your classic Mopar from sluggish, unresponsive handling to high performance fun! Dial in additional positive caster, adjust...


Product#: MM8184

1960-76 Mopar A-Body Upper Control Arm Mount; LH

If you are having difficulty maintaining proper front end alignment, be sure to check the mounting points for your suspension. This is a direct replacement for the control arm located in the "horseshoe". We have found that...


Product#: MM8185

1960-76 Mopar A-Body Upper Control Arm Mount; RH

If you are having difficulty maintaining proper front end alignment, be sure to check the mounting points for your suspension. This is a direct replacement for the control arm located in the "horseshoe". We have found that...


Product#: 99103G

1962-76 Mopar A / B / E-Body Black Polyurethane Upper Control Arm Bumper Stop

Replace those old, worn out or broken control arm bumpers with all new polyurethane bumper stops. These stops replicate the original in design and functionality, but are manufactured with modern polyurethane material for long...


Product#: 99119G

1962-76 Mopar A / B / E-Body Black Polyurethane Lower Control Arm Bumper Stop

Replace those broken or missing control arm bumper stops with new polyurethane bumper stops. Sold as a pair. Features mounting stud on back end. Made in USA Applications: A-Body 1 962 Lancer 1962-76...


Product#: MN6001

1963-74 Mopar A-Body Stamped Steel Upper Control Arm Disc Brake Installation Set

This original quality stamped steel upper control arm set is a must when installing mid-70's B and E-Body disc brakes on your A-Body Mopar. Include bushings and ball joints. Note: Not compatible with drum brakes. No...


Product#: MN6002

1963-74 Mopar A-Body Black Tubular Upper Control Arm Disc Brake Installation Set

This tubular upper control arm set is designed for installing mid-70's B and E-Body disc brakes on your A-Body Mopar. The arms are made from 1-1/4" .120" wall D.O.M. tubing and the pivot barrels are 1-1/2" .188" thick to...