1960-1977 Pontiac Ventura Parts - Weatherstrip

Reproduction of the original trunk weatherstrip for a wide variety of GM models including 1962-1977 Chevy II, Nova and X Body models. Each rubber weatherstrip measures 16-1/2 feet in length, and is manufactured with correctly...

Reproduction weatherstripping designed to replace the cracked or damaged original for various GM models. Replace your hatchback/trunk weatherstrip and stop leaks which could cause severe damage and rust to your trunk pan and...

High quality reproduction of the original weatherstrip seal which attaches to the cowl panel and seals the area between the hood and windshield. This reproduction is manufactured to exact specifications allowing the seal to...

Quality reproduction of the original weatherstripping that seals the area between the roof rail and door glass helping to eliminate the elements from entering the passenger and interior area. Each weatherstrip is molded to...

Front door weatherstrip of a 4-door full size GM Vehicles; this seal is designed from the original part for superior fitment and seal. This seal mounts around the front, bottom and rear of the door using pre-installed clips....

Replace your trunk weatherstrip and stop leaks which could cause severe damage and rust to your trunk pan and entire trunk area. Keep your trunk area water tight and completely sealed when closed ensuring the trunk pan is...

Rear door weatherstrip is designed from the original part for superior fitment and seal. This seal mounts around the front, bottom and rear of the door using pro-installed clips. Molded as left and right with pre-installed...

Reproduction of the original molded vent window seals designed for use on 1968-72 Chevy II / Nova and X-Body, 2 door models. MEach weatherstrip is manufactured of durable rubber for an authentic appearance and original fit....

Replacing the original leaky or cracked weatherstrip will create a weather-tight seal to keep the elements out when the door is closed. Keep the weather where it belongs- outside. Manufactured to exact specifications, these...

Rear window gasket mounts around the full perimeter of the back glass and has properly molded corners for precise factory fit. This also has the slot to accept the outer edge’s decorative molding. Chevrolet Applications ...

Exact reproduction of the original door frame weatherstrip that installs on the outer frame of the door on Chevrolet Full Size models. Manufactured in the correct configuration which allows easy installation when replacing...

Reproduction of the original door frame weatherstrip that installs on the outer frame of the door on 1968-1974 Nova and X-body 4 door sedan models. Manufactured in the correct configuration which allows easy installation when...

Reproduction of the original quarter window vertical weatherstripping designed for 1958-64 Impala, Bel Air, Electra, Le Sabre, El Dorado, and other Full Size GM models as listed. This high quality reproduction is manufactured...

Reproduction of the original door weatherstrip that installs on the outer frame of the door on 1968-72 Chevy II, Nova and GM X-body models. Manufactured in the correct configuration which allows easy installation when...

Reproduction of the original rubber seal designed to replace the back glass weatherstrip on various 1961-1962 2 door hardtop, and 1961 Impala hardtop/bubbletop models. Manufactured from ozone resistant EPDM rubber and from...

Quality reproduction of the original roof rail weatherstripping designed for 1959-60 Impala and Full size GM models. This quality reproduction seals the area between the roof rail and the door glass eliminating water and...

Exact reproduction of the original style rear door weatherstripping designed for use on Nova and X-body GM models. This weatherstrip seals the door frame from the top of the roof line around the rear door. After installed,...

Reproduction of the original rubber seal designed to replace the windshield weatherstrip on 1959-60 GM Full Size models. This windshield seal is designed for use on 2 or 4 door sedan and wagon models as listed. This...

Reproduction of the original door frame weatherstrip installed on all 1975-79 Nova and GM X-body 2 door coupe models. Each weatherstrip is manufactured in quality EPDM rubber to the correct configuration and features the...

Exact reproduction of the original style front door weatherstripping designed for use on Nova and X-body GM models. This weatherstrip seals the door frame from the top of the roof line to the windshield pillar post area...

Reproduction of the original style front windshield glass weatherstripping for use with various 1961-62 GM full size models with 2 or 4 door, hardtop, sedan, or station wagon models as listed. Also fits 2 door bubble top...

Exact reproduction of the original door frame weatherstrip that installs on the outer frame of the rear door on 4 door Chevy II and Nova models. Manufactured in the correct configuration which allws easy installtion when...

This rear window seal is for the 2 door hardtop models only. Manufactured from ozone resistant EPDM rubber from the same factory specifications as the original for an authentic fit and finish. This item is designed to be...

Reproduction of the original door frame weatherstripping designed for use on 1961-1964 GM Full Size 4 door and wagon models. This replacement weatherstrip is designed to factory specifications and manufactured in E.D.P.M...

Reproduction of the original rear door frame weatherstripping designed for use on 1961-64 GM Full Size 4 door hardtop models as listed. This replacement weatherstrip is designed to factory specifications and manufactured in...

By replacing the worn out felt channels and setting the glass to the up position, you can stop the rattles and leaks in your 1968-72 Nova and 1971-72 Ventura quarter window glass. This replacement style weatherstrip/felt...

These replacement style weatherstrips/felt channels run along the glass area of the quarter window to help seal the glass and stop the rattles and leaks in your 1973-74 Nova, Omega, Ventura, Apollo quarter window glass. The...

This replacement style weatherstrip/felt channel set runs along the glass area of the quarter window to help seal the glass and stop the rattles and leaks in your 1962-74 Nova quarter window glass. This is an OE style /...

By replacing the worn out felt channels and setting the glass to the up position, you can stop the rattles and leaks in your 1968-72 Nova and 1971-72 Ventura quarter window glass. These replacement style weatherstrips/felt...

By replacing the worn out felt channels and setting the glass to the up position, you can stop the rattles and leaks in your 1973-74 Nova, Apollo, Omega, and Ventura quarter window glass. These replacement style...

These replacement style weatherstrips/felt channels run along the glass area of the quarter window to help seal the glass and stop the rattles and leaks in your 1962-74 Nova quarter window glass. This OE style / functional...

These replacement style weatherstrips/felt channels run along the glass area of the quarter window to help seal the glass and stop the rattles and leaks in your 1962-74 Nova quarter window glass. This set is an OE style /...

By replacing the worn out felt channels and setting the glass to the up position, you can stop the rattles and leaks in your 1973-74 Nova, Omega, Apollo, or Ventura quarter window glass. These replacement style...

Reproduction of the original style rubber bumpers designed for use on 1968-79 Chevy II, Nova, and GM X-body models. The rubber stoppers on your door will wear out or detereriate over time. These reproduction stoppers will...

Reproduction of the original style rectangular ash tray to dash rubber bumpers designed for use with various 1967-1979 models as listed. Each rubber bumper is manufactured in quality EPDM rubber compound replicating the...

Reproduction of the original rear rocker panel flaps for use on various Buick, Chevrolet, Pontiac, and Oldsmobile models. Once installed, these flaps will help prevent road splash and debris from entering and blocking the...

Polyurethane lower control arm bumper stops are guaranteed to last longer and perform better than O.E.M. rubber stops. Cushions impact between suspension components preventing excessive damage. Sold as a pair. 1 pair required...

Reproduction of the original heater core tube to firewall seal for various 1967-79 Buick, Chevrolet, Oldsmobile, and Pontiac models with air conditioning. Manufactured to correct dimensions from quality EDPM rubber that...

1961-62 GM Full Size Vehicle rear window gasket for 4-door Hardtop. This gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise factory fit. Fitted gasket provides a formed,...

Reproduction of the original glove box door arm rubber stopper designed for use on various GM models. Eliminate the rattling and looseness of the glove box door by simply replacing the worn out or missing rubber glove box...

Reproduction of the original style fender skirt splash aprons for use with 1975-79 Chevrolet Nova and GM X-Body models. Replace your old splash aprons with new reproductions and keep your engine compartment clean and free of...

Correct reproduction of the original power window harness rubber boots which is used to house the power window wiring harness as it passes between the door jamb and door area. This rubber boot is manufactured in durable...

Reproduction of the original style cowl firewall seals designed for use with 1969 Camaro, Firebird, 1968-72 Chevy II Nova, 1971-74 Pontiac Ventura, 1971 Acadia, 1973-74 Buick Apollo, and 1973-74 Olds Omega models. Replace...

Reproduction of the original control arm bushing designed for use on various Buick, Chevrolet, Oldsmobile, and Pontiac models. Each upper control arm bumper is manufactured in the correct dimension using quality hardened EPDM...

1962-72 GM Full Size Vehicle Door drain hole seal. Replaces GM# 7789247. Applications 1967-72 Chevrolet Caprice 4-door Hardtop 1967-68 Chevrolet Caprice 4-door Wagon, 2 & 3 seat 1969-69 Chevrolet Caprice Kingswood Estate...

This OER® reproduction of the original upper push rod molded rubber boot is manufactured using correct E.D.P.M. rubber compound stock that is superior to the original. Molded in steel insert distributes mounting screw...

Original style rubber clutch pedal bumper designed for use with 1956-67 Corvette, 1967-81 Camaro, Firebird, and 1968-79 Chevy II Nova models. The clutch bumper is manufactured to correct factory specifications using quality...

Reproduction of the original door window channel strips for 1973-74 Nova, Apollo, Ventura, and Omega 2 door sedan models without vent windows. Each set includes flexible upper U-channel inserts and vertical glass run strips...

Reproduction of the original hood adjustment bumpers designed for use on various 1942-77 GM models. These 7/8" OD reproduction stoppers are manufactured in quality rubber and designed to replace the worn out, deteriorated,...

Reproduction of the original door lock gasket designed for use on various GM models including the listings below. After repainting your doors, or whenever replacing door locks, be sure to install new lock cylinder gaskets to...

Reproduction of the original rear axle compression bumper which attaches to the body and keeps the rear axle from bottoming out. Manufactured using hard rubber material with molded in stud for mounting. This is the second...

Reproduction of the original outer rear hood bumpers designed for use on various GM models as listed. Each bumper is manufactured to quality EPDM rubber compound and matches the original in dimensions allowing proper fitment....

Factory-style reproduction of the original glove box and fuel door rubber bumpers designed for use on 1970-74 Mopar E-Body models and a wide variety of other vehicles in the 1960's and 70's. Each bumper is manufactured in...

Correct reproduction of the U-shape rubber molded weatherstrip for your GM full size 2-Door Hardtop. This seal attaches to the door jamb area under the quarter window vertical weatherstrip and seals the door jamb quarter...

1959-60 Hardtop roof rail weatherstrips. This part fits on the roof of the vehicle and seals the side windows when they are fully raised. Includes clips for molded ends and pre-installed clips spaced 4" apart along...

This door handle O-ring is one of the most overlooked replacement parts on any vehicle. The O-ring inserts onto the outer door handle push button and eliminates rattling and wear between the handle and the push button....

Polyurethane control arm bump stops are guaranteed to last longer and perform better than O.E.M. rubber stops. Cushions impact between suspension components preventing excessive damage. Sold as a pair. 1 pair required per...

1959-60 GM Full Size Vehicle rear window gasket for 2 door hardtops. This gasket mounts around the full perimeter of the back glass and has properly molded corners for a precise factory fit. This gasket is for vehicles...

Reproduction of the original style components required to replace and mount the outer door mirror on the door. Contains all the necessary hardware to install a standard outer door mirror onto either the drivers or passenger...