Reupholstering Padding Kit; for Rear Bench Seat; 30" x 72" x 1.5" Rolls; Qty of 4
FEATURED

Product#: AK50105

Reupholstering Padding Kit; for Rear Bench Seat; 30" x 72" x 1.5" Rolls; Qty of 4

Reupholstery padding kit for rear bench seat. Comes with material to insulate and pad seat frame prior to installing new upholstery. Includes: 4 rolls of foam - Each roll is 30" x 72" x 1.5" Does not include hog...


Product#: A11774

Interior Door Panel Clip; White Nylon; Each

This special nylon clip is designed to attach to the cardboard backing on standard style interior door panel for various models. Once installed, the panel is pushed directly into the door frame and the clips hold the panel...


Product#: MA501501

1962 Lancer / Valiant 4 Door Black Loop Carpet Set

Treat your Classic to the absolute highest quality molded carpet on the market today! Manufactured utilizing modern textile chemistry, this revolutionary new 80%-20% Rayon/Nylon blend yarn will duplicate the appearance...


Product#: SF150

1960-65 Dodge, Plymouth A , B-Body; Front Bucket Seat Foam; Each; Made in the USA

OER« reproduction of the original seat foam designed for use with 1960-65 Dodge and Plymouth A and B Body models as listed. Replacing the seat foam before installing new upholstery is a must for any restoration. This...


Product#: MD690601

1960-1976 Plymouth; Custom Carpeted Floor Mat Set; "Plymouth" Logo; Black; 4 Piece Set

Protect your interior carpet and give your Plymouth a unique look by adding these custom style floor mats for front and rear! Floor mats are designed for use with all 1960-1976 Plymouth models. Both front and rear mats...


Product#: MD690507

1966-71 Dodge, Plymouth; Hemi Custom Carpeted Floor Mat Set; Blue; 4 Piece Set

Protect your interior carpet and give your Dodge or Plymouth HEMI a unique look by adding these custom style floor mats for front and rear! Floor mats are designed for use with all 1966-1971 Dodge or Plymouth models. Both...


Product#: 4500027

GM Door Panel and Sail Panel Installation Clip - Each

Reproduction of the original style door panel installation clips used to install 1967-79 front door panels or for coupe rear quarter sail panels on various GM models. Clips can be used for standard and deluxe interiors. See...


Product#: SF119

Seat Foam Sheet - Non-Molded - Universal Fit 36" x 68" X 1-1/2"

This universal fit seat foam is a high density sheet suitable for all non-molded bench seats including rear seats and wagon seats. When replacing the seat covers or upholstery in most trucks or vehicles, this non-molded seat...


Product#: MB2002

1964-65 Dodge, Plymouth; Chrome Front Arm Rest Bases; 15"; Various Models

Correct reproduction of the original front arm rest bases designed for use with various 1964-65 Dodge and Plymouth models as listed below. Each arm rest base is manufactured in quality injection molded ABS featuring a...


Product#: R894

1962-81 GM Door Panel Clip Retainer Set ; 12 Piece Set

OER reproduction of the interior door panel clip retainers designed for use on various GM models including 1967-81 Camaro and Firebird models. These injection molded rubber plugs are inserted into the door shell to secure the...


3'' x 6' Jute Padding Insulation; 40 oz.
NEW

Product#: CMD1002

3"" x 6" Jute Padding Insulation; 40 oz.

Jute padding will insulate your interior from noise while helping to maintain an even temperature. For firewalls, floor pans, trunks, doors, and roof panels or other areas of the vehicle. These jute pads measure 3' x 6 and at...


Product#: *K1119

12 Piece Plastic Firewall Insulation Retainer Set

Reproduction of the plastic push-in firewall pad retainer clips used to attach the pad to the firewall. Dimensions 1" head x 7/16" dia. x 1-7/16" length. Quantities vary by model, use as needed. The OER® Authorized...


Product#: *R385

Nylon Door Panel Clip Set; Set of 12 Clips

This special nylon clip is designed to attach to the cardboard backing on standard style interior door panel for various models. Once installed, the panel is pushed directly into the door frame and the clips hold the panel...


Product#: *KW272A

1955-81 GM; Firewall Pad Fastener Set; 4 Piece Set

This reproduction firewall pad fastener is designed to hold the firewall insulation pad in place on various 1955-81 General Motors models. Each fastener is manufactured from EPDM rubber replicating the original configuration...


Product#: *K1117

7 Piece Plastic Firewall Insulation Retainer

Set of 7, nylon firewall insulation retainer clips for various GM applications. Stem measures 7/16" in diameter x 1-7/16" in length and features a 1" diameter head. Made of durable black nylon plastic. The OER®...


Product#: *R386

Nylon Door Panel Clip Set; 8 Piece

These clips are designed to attach to the lower door panel. Once installed, the panel is pushed directly into the door frame.The nylon clips will keep the door panel positioned properly after installed. Applications: ...


Product#: *MD2007

1960-65 Mopar A-Body / B-Body Front Bucket Seat Foam Set

Replace deteriorated or worn-out seat foam with a new set of molded foam to give your seat upholstery a "like-new" look and feel. This set includes 2 seat bottoms and 2 seat backs to do both bucket seats. Impo rtant:...


Product#: AK50104

1960-78 Reupholstering Padding Kit For Front Bench Seat

Reupholstery padding kit for front bench seat. Comes with material to insulate and pad seat frame prior to installing new upholstery. Includes: 1 30" x 70" x 1-1/2" thick foam 1 10 lb roll of cotton 4 yards of burlap 4...


Product#: AK50102

1960-79 Reupholstering Padding Kit For Rear Bench Seat

Reupholstery padding kit for rear bench seat. Comes with material to insulate and pad seat frame prior to installing new upholstery. Includes: 30" x 70" x 1-1/2" thick foam 10 lb roll of cotton 4 yards of burla p 4...


Product#: 7642589

Firewall Insulation Retainer

Plastic firewall insulation retainer clip for various GM applications. Stem measures 7/16" in diameter x 1-7/16" in length and features a 1" diameter head. Sold individually. Use as required. The OER® Authorized...