Product#: 3415

Bumper Bolt with Conical Keps Hex Nut; Polished Stainless Steel Capped Head; 3/4" Diameter; 3/8-16" x 1"; Zinc Plated

Reproduction GM bumper bolt for a variety of General Motors and Chrysler applications. Each zinc-plated steel carriage bolt features a polished stainless steel cap for superb cosmetic appearance, corrosion resistance and long...

Product#: 2710

Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head

Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...

Product#: 8610

Flat Washer; 1/2" USS; Zinc Plated

1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...

Product#: 13757

1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon

Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...

Product#: 548935

1962-1977 GM; Windshield Washer Jar Bracket; Various Models

OER® replacement of the original windshield washer jat bracket designed for use on various 1962-77 GM models as listed. This bracket is manufactured in stamped steel and features an EDP coating for rust resistance. This...

Product#: 3764424

1962-72 Chevrolet/Pontiac; OE Style Firewall Pad Fastener; Plastic; 7/16" X 1.50"; Various Models

Correct reproduction plastic firewall pad fastener for various GM models including 1967-69 Camaro, 1967-69 Firebird, 1962-72 Nova and 1962-69 Impala models. These fasteners are required to allow the firewall pad to attach...

Product#: 10362

Bolt, 5/16-18 x 13/16" Pointed Tip With Hex Washer Head, Black Phosphate

OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...

Product#: 3899508

1959-80 Trico Windshield Wiper Blade; 15" Length; Various Models; Each

Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...

Product#: 152622

1963 Impala / Full Size Rear Bumper; Smoothie Bumper; 1 Piece Design

We now offer this beautifully designed rear chrome bumper for 1963 Impala, Bel Air and Biscayne models. Give your Chevy B-Body a custom look with this seamless chrome smoothie rear bumper. Replaces the original bumper and...

Product#: 152619

1963 Impala / Full Size; Front Bumper; Smoothie Bumper; 1 Piece Design

We now offer this beautifully designed front chrome bumper for 1963 Impala, Bel Air and Biscayne models. Give your B-Body a custom look with this seamless chrome smoothie rear bumper. Replaces the original bumper and bolts...

Product#: B17053

1963 Impala. Bel Air, Biscayne; Front Bumper Set; Chrome; 3 Piece Set; OER Premier; Show Quality

OER Premier reproduction of the original 3 piece front chrome bumper designed for use on 1963 Impala, Bel Air and Biscayne models. This reproduction front bumper is manufactured to correct factory specifications and features...

Product#: BG3168C

1963-64 Impala 4 Door Wagon Back Glass - Clear

Reproduction back window glass for 1963-64 GM B-body 4-door Station Wagon models. Replace your missing or damaged original back glass with our OEM quality reproduction glass. Each glass is professionally packed with extra...

Product#: BG3168Y

1963-64 Impala, GM 4 Door Wagon; Back Window Glass; Custom Gray Tinted

Reproduction of the original back window glass are now available for 1963-64 GM B-body 4-door Station Wagon models. Replace your missing or damaged original back glass with our OEM quality reproduction glass. Each glass is...

Product#: B17052

1963 Impala, Bel Air, Biscayne; Rear Bumper Set ; Chrome; 3 Piece Set

Reproduction of the original 3 piece rear chrome bumper designed for use on 1963 Impala, Bel Air and Biscayne models. This reproduction rear bumper is manufactured to correct factory specifications and features a bright...

Product#: BG3130Y

1962-64 Impala, Bel Air, Biscayne 2 & 4-Door Sedan; Rear Window Glass; Custom Gray Tinted

Reproduction back window glass for various 1962-64 Buick, Chevy, Oldsmobile, and Pontiac Full Size 2 and 4 door sedan models except bubble top. Each rear window glass is manufactured in tempered glass to factory...

Product#: K51020

1962-76 GM, Dodge, Plymouth; Various Models; Convertible Top Boot Storage Bag

Why leave your top boot in the trunk exposed when you can keep it safe and clean by safely storing it in this special top boot storage bag. The storage bag will help protect your vehicles top boot while being stored in the...

Product#: 3819074

1958-80 TRICO RF-15 Style Wiper Blade Refill; 15" Length; Reproduction; Various Models

OER® reproduction of the original Trico RF-15 wiper blade insert/refill for 15" TRICO wiper blades. This period-correct TRICO RF-15 style insert is made with a stainless steel vertebra and a precision wiping edge produced...

Product#: 4753019

1959-72 Buick; Chevrolet; Oldsmobile; Pontiac; Trunk Lock Latch Assembly; Manual; Various GM Models

This OER® reproduction of the original manual trunk lid latch assembly. This correct reproduction installs in the trunk area and is connected to the trunk lock cylinder by the handle shaft. Allows the trunk lid to lock...

Product#: 3825828

1963-67 Chevrolet, Oldsmobile, Pontiac; Hood Hinge Assembly; RH Passenger Side

Reproduction hood hinge assembly for various 1963-67 GM models. Each hood hinge is manufactured from stamped steel to factory specifications assuring a quality replacement. Features correct mounting points for ease of...

Product#: 11503957

U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each

Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...