1963-66 Ford, Mercury; Power Steering Cylinder; w/ Boot
FEATURED

Product#: 3A540A

1963-66 Ford, Mercury; Power Steering Cylinder; w/ Boot

This all - new power steering cylinder is accurately reproduced to match the 1964-66 Mustang & 1963-65 Falcon/Comet cylinder in fit, function and appearance. Sold outright, no core required! Includes rubber boot and bushings....


Product#: FM110658

1964-65 Mustang Power Steering Pump without Reservoir; w/Eaton Pump; Front Mount - Remanufactured

If you're in the market to replace the worn out, damaged or missing power steering pump, choose this OER® Authorized remanufactured power steering pump that is thoroughly remanufactured, carefully inspected and restored...


Product#: 71350

3/8" X 48" Power Steering Return Hose; Without Fittings; Cut to Fit

A leak in your power steering system can make a mess of your engine compartment, your driveway and garage floor. You can also burn up your power steering pump by driving your classic when it is low on fluid. OER®...


Product#: 1253580

1960-77 GM, Chrysler, Dodge, Plymouth; Power Steering Fitting; with Saginaw PS Pump; Cad Plated; Various Models

Reproduction of the original style power steeing pump fitting for use with various 1960-77 Chrysler, Dodge, Plymouth, and GM models as listed. Many Saginaw power steering pumps with a female style fitting require an adapter...


Product#: 71224

3/8" x 24" Power Steering Return Hose; Without Fittings; Cut to Fit

Service replacement power steering hose. A leak in your power steering system can lead to a very serious and possibly dangerous situation. Leaking hoses can cause a loss of steering. Replace your worn out or cracked power...


Product#: 1253532

1978-2006 Power Steering Pump Supply Hose Fitting; Metric; O-ring Style

Power steering pump supply hose fitting for 1978-2006 Saginaw power steering pumps requiring a metric style fitting with the o-ring style seal. This fitting is necessary to mount the cover to the pump and connects to the...


Product#: 71236

Power Steering Return Hose; 3/8" I.D. X 36"; Cut to Fit

Reproduction of the original style power steering return hose. A leak in your power steering system can lead to a very serious and possibly dangerous situation. Leaking hoses can cause a loss of steering. Replace your worn...


Product#: 1253531

1963-77 Power Steering Pump Supply Hose Fitting; SAE; Inverted Flare Style

Power steering pump supply hose fitting for 1977 and older Saginaw pumps requiring an SAE style fitting with the inverted flare. This fitting is necessary to mount the cover to the pump and connects to the supply pressure...


Product#: 3A713F

1963-66 Ford / Mercury; Power Steering Hose Return Line End Fitting

Replacement power steering return hose end fitting for various 1963-66 Ford and Mercury models including Mustang, Falcon, Comet, and Ranchero. A leak in your power steering system can lead to a very serious and possibly...


Product#: EP1900

EPAS Performance Hydroelectric Power Steering Pump System

EPAS Performance Hydroelectric Pump System. This system has a program that works with an angle sensor and CAN protocol. The converter talks to the pump via the angle sensor, ramping up the systems pressure as needed. There is...


Product#: FM110724

1964-66 Power Steering Conversion Kit; with CPP 400 Series? Gear Box; SBF

CPP has the newest technology power steering conversion kits for your classic! CPP has you covered with the 400 Series™ with a 13.6 ratio for your 1964-70 Mustang and now offer late model performance steering for your...


Product#: 23C

1958-82 Buick, Chevy, Olds, Pontiac; Power Steering Return Hose Clamps; Pair

Superb quality reproduction of the original power steering return hose clamps designed for use with various 1958-82 GM models with power steering. Each clamp is cosmetically correct and manufactured to factory specifications...


Product#: 3A533

1965-70 Mustang; Power Steering; Hydraulic Control Ball Stud Repair Kit

The power steering ball and stud repair kit includes the ball, stud kit and all seals necessary to stop leaks and reduce excess play in steering wheel. Fits a wide variety of Ford applications including 1963-70 Falcon,...


Product#: 3A674A1

1964-65 Mustang; Power Steering Pump w/ AC; 6/8 cyl; Rear Mount Eaton Pump; w/o Reservoir

1964-65 Mustang 6 and 8 Cylinder new power steering pump. For air conditioned cars and rear mount eaton pump. (Reservoir not included). This is a brand new power steering pump without reservoir. Why mess around with a rebuilt...


Power Steering Hose Kit; 2 Pc Rubber; GM Pump to Conversion Box; I-6 Onl
NEW

Product#: BG925110

Power Steering Hose Kit; 2 Pc Rubber; GM Pump to Conversion Box; I-6 Onl

2 Piece OEM style rubber power steering hose kit. Connects GM Saginaw power steering pump to Borgeson power steering conversion box part #'s 800110, 800111, 800114, 800115 & 800117. I-6 applications only. {fitment}


Product#: 3A650

1959-80 Ford/Mercury; Power Steering Hydraulic Control Valve Seal Kit

Power steering control valve seal set for numerous Ford and Mercury applications including Mustang, Falcon, Cougar, and Comet. The power steering control valve directs fluid to either side of the steering cylinder. When worn,...


Product#: 3A713B

1963-66 Ford/Mercury; Power Steering Hose Return Line

A leak in your power steering system can lead to a very serious and possibly dangerous situation. Replace your worn out or cracked power steering hose before big problems occur. Applications: 1963 Ford Falcon Futura Sprint...


Product#: 3A764

1957-77 Ford/Mercury; Mustang/Falcon/Cougar/Comet; Power Steering Cylinder Seal Kit

Replacement power steering hydraulic cylinder boot and insulator kit for numerous Ford and Mercury applications including Mustang, Falcon, Cougar, and Comet. The power steering cylinder mounts under the car next to the...


Product#: 3A610A

1962-66 Ford/Mercury; V8; Power Steering Hose Insulator Bracket; Mustang/Falcon/Comet

Reproduction power steering hose bracket for use on various 1963-66 Ford and Mercury vehicles including Mustang, Falcon, Fairlane, and Comet. Manufactured in heavy gauge die-stamped steel, this bracket is a two piece design...