Product#: MN1776

1968-71 Dodge, Plymouth A, B, E-Body; Headlamp Adjustor Hardware Set with 4 Lamp System

Reproduction of the original style headlight adjuster screw assembly used for headlamp beam adjustment on various Mopar models from 1968-1971. This nut and screw assembly mounts directly to the headlamp housing and enables...

Product#: 6027292

1964-81 GM, Mopar; Headlight Bucket Tension Spring; Various Models; Each

Plated tension spring for headlight bucket to fit a wide variety of vehicle applications including GM and Mopar models. Closed back design is produced to allow the spring to be installed with a single phillips head screw...

Product#: MN3053

1966-67 Mopar A/B-Body With 4 Lamp System Headlamp Adjustment Set

Replace your cracked or damaged headlamp adjusters with this new set of headlamp hardware.

Product#: MN3052

1966-67 Mopar A/B-Body With 2 Lamp System Headlamp Adjustment Set

Replace your cracked or damaged headlamp adjusters with this new set of headlamp hardware.

Product#: 3574085

12-28 X 1-1/2" Mopar Headlamp Adjuster Screw And Nylon Nut Assembly

Reproduction of the original style headlight adjuster screw assembly used for headlamp beam adjustment on various Mopar models from 1972-on. This screw assembly with nylon retaining nut attaches to the headlamp bucket to...

Product#: 41483

Screw #8 X 1" with #6 Phillips Head Tapping Screws; Chrome; Set of 4

Set of 4 screws used to attach various parts including 1974-78 Mustang II headlamp bezels # 13064P.

Product#: A2303

J Nut #10 Screw Size;.027-.045 Panel Thickness; Phosphate

J Nut #10 Screw Size,.027-.045 Panel Thickness. Center of hole to Edge: 3/16". Phosphate Finish.

Product#: 280495

1970 & 1972-74 Plymouth Barracuda; Cuda; Headlight Bulb Retaining Ring Screw Set; Zinc Plated; 6-Piece Set

Reproduction headlight bulb retaining ring screw set for 1970 and 1972-74 Plymouth Barracuda and Cuda models. Manufactured to factory specifications featuring the correct Phillips pan head and zinc plated for corrosion...

Product#: A1459

#10 x 1" Slotted Pan Head Tapping Screw; Zinc Chromate

#10 x 1" slotted pan head tapping screw. Bright Zinc chromate for rust resistance.

Product#: ME8132

1971 Plymouth Barracuda / "Cuda Headlamp Back Plates

Reproduction of the original headlamp back plates designed for use on 1971 Plymouth Barracuda and Cuda models. Each back plate is die-stamped to the original factory configuration ensuring an authentic appearance and fit....

Product#: 280496

1968-74 B-Body; 1971 Barracuda; 1970-74 Challenger; Dodge; Plymouth; Headlight Bulb Retaining Ring Screw Set; Zinc Plated; 12-Piece Set

Reproduction headlight bulb retaining ring screw set for 1968-74 B-Body, 1971 Barracuda & Cuda, and 1970-74 Challenger models. Manufactured to factory specifications featuring the correct Phillips pan head and zinc plated for...

Product#: MP414050

1963-65 Valiant, 1964-65 Barracuda; Headlamp Molding Fastener Clip Set; Pair

Reproduction of the original headlamp molding clips designed for use with 1963-65 Valiant and 1964-65 Barracuda models. Each clip is manufactured to factory specifications and replaces the original exactly. Includes 2 clips...

Product#: MN1775

1968-71 Mopar Headlamp Adjustment Set ; with 2 Lamp System ; A, B, E-Body

Reproduction of the original headlamp adjustors designed for use on 1968-71 A, B and E body Dodge and Plymouth models with a 2 headlamp system. Includes 4 correctly produced adjustors, 2 springs and 2 screws. Applications:...

Product#: MN2898

1963-65 Mopar Headlamp Adjustment Hardware Set ; with 2 Lamp System ; 12 Piece Set

Reproduction of the original style headlight adjuster screw assembly used for headlamp beam adjustment on various Mopar models from 1963-65. This screw assembly with nylon retaining nut attaches to the headlamp bucket to...

Product#: ME1299

1971 Barraduda / Cuda Road Lamp Mounting Brackets; Pair

Reproduction of the original road lamp mounting brackets designed for use on 1971 Plymouth Cuda models. Available as option code L34 in 1971, the road lamp option added two round fog lamps below the front bumper on each side...

Product#: MN3055

1972-76 Mopar Headlamp Adjustment Set ; with 4 Lamp System ; 24 Piece Set ; A,B,E-Body

Reproduction of the original style headlight adjuster screw assembly used for headlamp beam adjustment on various Mopar models from 1972-on. This screw assembly with nylon retaining nut attaches to the headlamp bucket to...

Product#: 1493541

1968-71 Dodge, Plymouth; Headlamp Adjuster Screw And Nut Assembly; Each

Reproduction of the original style headlight adjuster screw assembly used for headlamp beam adjustment on various Mopar models from 1968-1971. This nut and screw assembly mounts directly to the headlamp housing and enables...

Product#: MN2899

1963-65 Mopar Headlamp Adjustment Set ; with 4 Lamp System ; A/B-Body ; 24 Piece Set

Reproduction of the original style headlight adjuster screw assembly used for headlamp beam adjustment on various Mopar models from 1963-65. This screw assembly with nylon retaining nut attaches to the headlamp bucket to...

Product#: *R492

Screw Set; Chrome Plated ; #8 x 3/4" Oval Phillips Head ; Set of 8 ;

Original style oval head chrome screw set designed to install sill plates, headlamp bezels, shift plates and other various components and parts. Includes 8 chrome phillips oval head #8 x 3/4" screws. Use as required. Can be...

Product#: A10165

# 8 x 3/4" Oval Phillips Head Screw; Black Oxide; #8 Head

Original style oval head black-oxide screw originally used to install moldings, grill and headlamp bezels, and various other components and parts on classic American cars and trucks. Sold individually. Use as required. Can be...