Product#: 3415

Bumper Bolt with Conical Keps Hex Nut; Polished Stainless Steel Capped Head; 3/4" Diameter; 3/8-16" x 1"; Zinc Plated

Reproduction GM bumper bolt for a variety of General Motors and Chrysler applications. Each zinc-plated steel carriage bolt features a polished stainless steel cap for superb cosmetic appearance, corrosion resistance and long...

Product#: A1017

3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each

Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...

Product#: TR17758B

3/8"-16X 15/16"; Bumper Bolt; Stainless Steel Cap; Flat Head; Package of 25

Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...

Product#: A15043

Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1-3/64" Stem Length; For 1/2" Hole

Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold individually. Use as required. Replaces...

Product#: 8557

Bumper Bolt with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1" Bolt with Hex Nut

Reproduction bumper bolt with hex nut manufactured in zinc plated material offering an authentic appearance and fitment. Measures 7/16" -14 x 1" and features a stainless steel cap. Head diameter 31/32". Each bolt will replace...

Product#: TF400727

Bumper Bolt and Hex Nut; with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1-1/4"

Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...

Product#: *C15323

Plastic Retainer Set; Push-In Type; 1" Head Diameter; For 1/2" Hole; GM # 473798, 5930892, 5973400; Clear; 25 Pieces

Correct style push-in clear retainer clip designed for use with various GM applications including 1979-2002 Camaro and 1976-2002 Firebird models. Manufactured to replicate the original GM design in a clear injection molded...

Product#: *C15322

Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1/2" Hole; GM # 14103461; 25 Pieces

Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold in set of 25 pieces. Use as required....

Product#: MN1709

7/16"-14 X 1-3/8"; Zinc Plated Bumper Bolt With Nut; 7/8" Flat Stainless Capped Head

This stainless capped bolt features the correct style flat head and features a hex nut. Manufactured in zinc plated material, measures 7/16"-14 X 1-3/8" and features a stainless steel cap. Head diameter 7/8". Shoulder length...

Product#: A8623

7/16"-14 x 1" Bumper Bolt with 29/32" Stainless Steel Cap, Zinc Finish

7/16"-14 x 1" Bumper Bolt with 29/32" Stainless Steel Cap, Zinc Finish. Sold inidvidually.

Product#: *881404

M6-1.0 Metric Standard Flange Spin Lock Nut with Serrations; Pair

M6-1.0 metric standard flange spin lock nut with serrations. Sold as a pair.

Product#: 3989

7/16" SAE Flat Washer 15/32" ID; 15/16" OD; Zinc

7/16" SAE flat-washer used in a variety of applications including on bumper brackets among many other uses. 7/16" Medium Flat Washer plated in zinc for corrosion resistance. Specifications Finish: Zinc For Bolt Size: 7/16"...

Product#: TF400728

7/16-14" X 2-1/2" Bumper Bolt With Nut; With Stainless Steel Domed Cap; Each

Missing an individual bumper attachment bolt? You can replace them individually with this bolt. Each bolt will replace the rusted or broken original. Bolts fit a variety of models including all 1955-57 Chevrolet models. Bolt...

Product#: B100032

1965 Chevrolet Impala; Bel Air; Biscayne; Front Bumper to Bumper End Reinforcement Plate and Hardware Set

Reproduction front bumper to bumper end reinforcement plate set for various 1965 Chevrolet full size passenger car models. These steel plates are needed to properly install and align the center front bumper to the LH and RH...

Product#: SK161

1965-66 Impala, Bel Air, Biscayne, Caprice; Bumper Bolt Set; Front and Rear; 24 Piece

Reproduction of the original style bumper bolts designed for use with 1965-66 Chevrolet Impala, Bel Aie, Biscayne, and Caprice models. This bolt set features 8 bolts, 8 nuts, and 8 lock washers. Set will mount both the front...

Product#: 9152

1/2"-13x1-1/4" Bolt

1/2"-13 X 1-1/4" Grade 8 Bolt, Alloy Zinc/Yellow. Used for a variety of applications including on bumper brackets when attaching them to the frame of the vehicle, among other uses. Specifications Grade: 8 Finish: Zinc and...

Product#: G6608

Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1-3/64" Stem Length; For 1/2" Hole

Genuine GM push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold individually. Use as required. Replaces OE...

Product#: 13237

1/2"-13 Stainless Steel Hex Nut

1/2-13 Hex Nut - 18-8 Stainless. Used for a variety of applications including on bumper brackets when attaching them to the frame of the vehicle, among other uses. Specifications Finish: Polished Stainless Size: 1/2-13" Hex...

Product#: B660281

1965-66 Impala, Bel Air, Caprice; Rear Bumper Installation Hardware Set; 72 Piece

Reproduction original style hardware required to mount the rear bumper for 1965-66 Impala and other full size Chevrolet models. Mounting an original or reproduction bumper is made much easier by having the right mounting...

Product#: B660280

1965-66 Impala, Bel Air, Caprice; Front Bumper Installation Hardware Set; 84 Piece Set

Reproduction original style hardware required to mount the front bumper for 1965-66 Impala and other full size Chevrolet models. Mounting an original or reproduction bumper is made much easier by having the right mounting...