Product#: 11246

Headlamp Adjusting Screw ; For GM Models ; 1/4"-28 x 2"

Reproduction of the headlamp adjustment screw required for a wide variety of GM models including 1965-75 Impala, Biscayne, Bel Air and Caprice models. This 1/4"-28 adjustment screw comes zinc plated for corrosion resistance...

Product#: A5789

1962-71 GM Headlight 1/4"-28 x 1" Adjustment Screw with Nylon Nut

Original self-retaining nylon nut and 1/4"-28 x 1" screw assembly used for headlamp beam adjustment on 1962-71 GM models. This nut and screw mounts directly to the headlamp housing to enable the headlamp beam to be aimed...

Product#: 5953168

Headlamp Adjusting Spring

OER® reproduction of the original headlamp adjusting spring designed for use on various GM models. This headlamp spring is used to adjust the headlight beam to the proper alignment. Applications: 1973-1974 Buick Apollo...

Product#: 6027292

1964-81 GM, Mopar; Headlight Bucket Tension Spring; Various Models; Each

Plated tension spring for headlight bucket to fit a wide variety of vehicle applications including GM and Mopar models. Closed back design is produced to allow the spring to be installed with a single phillips head screw...

Product#: A5788

1/4-28 GM Headlamp Adjuster Nylon Nut

Reproduction 1/4-28 x 1-1/2" headlamp adjuster nylon nut for a wide variety of classic GM vehicles. Will fit various early GM vehicles, including 1967-68 Firebird models. Sold individually. Buick Applications: 1962-68...

Product#: 41483

Screw #8 X 1" with #6 Phillips Head Tapping Screws; Chrome; Set of 4

Set of 4 screws used to attach various parts including 1974-78 Mustang II headlamp bezels # 13064P.

Product#: *881381

1967-68 Camaro/1962-68 Chevrolet Truck; Headlamp Adjuster Set

Reproduction headlamp adjuster set for 1967-68 Camaro and 1962-68 Chevrolet truck models. Each set has the 4 adjusting screws and nuts and the 2 springs, enough for both headlamps. Chevrolet Applications: 1967-68 Camaro ...

Product#: *596686

1962-68 GM Headlight Adjustment Screw with Nylon Nut 1/4"-28 x 1-1/2"

Original self-retaining nylon nut and 1/4"-28 x 1-1/2" screw assembly used for headlamp beam adjustment on 1962-68 GM models. This nut and screw mounts directly to the headlamp housing to enable the headlamp beam to be aimed...

Product#: A9400115

1940-81 GM; F-Body / Impala / Nova / Truck - Headlamp Retaining Ring Screw Set (6 Pieces)

Headlamp retaining ring screws are used to hold the headlamp bulb to the mounting bucket.

Product#: A2303

J Nut #10 Screw Size; .027-.045 Panel Thickness; Phosphate

J Nut #10 Screw Size, .027-.045 Panel Thickness. Center of hole to Edge: 3/16". Phosphate Finish.

Product#: A1459

#10 x 1" Slotted Pan Head Tapping Screw; Zinc Chromate

#10 x 1" slotted pan head tapping screw. Bright Zinc chromate for rust resistance.

Product#: C1403

Headlamp Adjuster Screw with Nylon Nut; 1/4-28 x 1"; 8 Piece Set

Correct reproduction of the original headlamp beam adjusting hardware designed for use on various 1962-66 GM models. Includes (4) nylon nuts, (4) 1/4-28 x 1" adjuster screws. Each kit includes adjusters for both the RH and LH...

Product#: A10165

# 8 x 3/4" Oval Phillips Head Screw; Black Oxide; #8 Head

Original style oval head black-oxide screw originally used to install moldings, grill and headlamp bezels, and various other components and parts on classic American cars and trucks. Sold individually. Use as required. Can...

Product#: 153930

1958-82 Chevy, Pontiac; Headlamp Mounting Set; Various Quad Headlamp Models; 3 Tab

Reproduction of the original headlamp mounting set designed for use on various Chevrolet and GMC truck models. This set includes four 3-tab stainless headlamp retaining rings, four EDP coated "square-hole" style headlamp...

Product#: *R493

Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head, 10 Piece Set

Original style oval head chrome screw set designed to install sill plates and other various components and parts. Includes 10 chrome phillips oval head #8 x 3/4" screws. Set includes 10 phillips oval head screws. Use as...

Product#: *R492

Screw Set; Chrome Plated ; #8 x 3/4" Oval Phillips Head ; Set of 8 ;

Original style oval head chrome screw set designed to install sill plates, headlamp bezels, shift plates and other various components and parts. Includes 8 chrome phillips oval head #8 x 3/4" screws. Use as required. Can...

Product#: 3982098

U-Type Extruded Clip Nut, Fits 1/4-20 Bolts, Black Phosphate Coated

Replacement U-clip nuts used on various GM vehicles. Black phosphate coated. Quantities vary by model. Use as needed. This is the correct nut used to install the rear tail lamp to the body. Can be used to install the rear...

Product#: K89528

Fantastic Plastic Polish; Headlight and Plastic Restorer; Lens Polish; 16 Oz. Pint Bottle

Restores, revitalizes & protects while removing yellow film, cloudy streaks, hairline scratches, haze & halos from clear, smooth plastics. Excellent on headlight covers, taillight lenses, bug deflectors, instrument covers,...