Product#: 10195

1967-74 GM; Control Arm Ball Joint; Upper

Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...

Product#: 14927

Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each

Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...

Product#: W1006

1964-2000 GM; Front Coil Spring to Frame Rubber Insulator; 1/4" Thick; LH or RH; Various Models; Each

Reproduction molded rubber front coil spring insulator that mounts between the coil spring and the frame on various 1949-96 vehicles. This insulator keeps the spring from riding metal-to-metal on the frame. Coil spring...

Product#: 154077

1963-70 Chevrolet C10; Tubular Control Arm Set; Coil Over Type; Upper and Lower

Gain 21st century handling in your classic Chevy C10 truck. This is an upper and lower front tubular control arm set for conversion to coil-over shocks. Each set includes upper and lower tubular control arms, and upper...

Product#: T70892W

1960-72 Chevrolet, GMC Truck; Rear Control Arm; Passenger Side; Silver Weld-Thru Coating

Quality reproduction rear control arm for 1960-72 Chevrolet, GMC truck models with rear coil springs. This control arm is also known as a trailing arm. Installs to the rear axle housing and the center cross frame to support...

Product#: 153973

1963-70 Chevy and GMC Truck; Lower Control Arms; Pair

New stock style lower control arms for 1963-70 Chevrolet and GMC C10 pickup, panel, and Suburban models. Includes both RH and LH lower control arms with cross shafts, bushings, and ball joints pre-installed. Each lower...

Product#: T70585

1963-70 Chevy Pickup, Blazer, Suburban; Van; Upper Control Arm; C10; Drivers Side

Reproduction of the original upper control arm designed for use with 1963-70 Chevrolet and GMC Pickup, Suburban, Panel Truck, Crew Cab, Blazer and Jimmy 1/2 ton, 2 wheel drive models. Also fits 1970 Chevrolet G10/G20 Van, and...

Product#: 153970

1963-70 Chevy and GMC C10 Truck; Upper Control Arms; Pair

Reproduction upper control arms for 1963-70 Chevrolet and GMC truck models. These upper contro arms are manufactured to original factory specifications from heavy gauge steel replicating the original in design and fitment....

Product#: FSB905

1963-87 Chevy, GMC C10 Pickup Truck; Front Sway Bar; 1-1/8" Diameter

Front sway bar for 1963-87 Chevrolet and GMC pickup truck models. This sway bar is designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved vehicle handling and control. Offers all of...

Product#: 154891

1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair

Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...

Product#: A15589

Hex Nut 7/16-14

Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell...

Product#: T70893W

1960-72 Chevrolet, GMC Truck; Rear Control Arm; LH Driver Side; Silver Weld-Thru Coating

Quality reproduction rear control arm for 1960-72 Chevrolet, GMC truck models with rear coil springs. This control arm is also known as a trailing arm. Installs to the rear axle housing and the center cross frame to support...

Product#: T70893

1960-72 Chevrolet, GMC Truck; Rear Control Arm; LH, Driver Side; EDP Coated

Quality reproduction rear control arm for 1960-72 Chevrolet and GMC truck models with rear coil springs. This control arm, also known as trailing arm, installs to the rear axle housing and the center cross frame to support...

Product#: T70892

1960-72 Chevrolet, GMC Truck; Rear Control Arm; RH; EDP Coated

Quality reproduction rear control arm for 1960-72 Chevrolet and GMC truck models with rear coil springs. This control arm, also known as trailing arm, installs to the rear axle housing and the center cross frame to support...

Product#: T70586

1963-70 Chevy Pickup, Blazer, Suburban; Van; Upper Control Arm; C10; Passenger Side

Reproduction of the original upper control arm designed for use with 1963-70 Chevrolet and GMC Pickup, Suburban, Panel Truck, Crew Cab, Blazer and Jimmy 1/2 ton, 2 wheel drive models. Also fits 1970 Chevrolet G10/G20 Van, and...

Product#: FSB901

1963-87 Chevrolet/GMC Truck; Front Sway Bar; 1-1/4" Diameter

Replacement sway bar designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved vehicle handling and control. Offers all of the above without affecting your ride quality. Kit...

Product#: FSB904

1974-78 Mustang II 3/4" Front Sway Bar; Measures 43-1/4" Wide; For Standard Crossmember

Replacement 3/4" sway bar kit for hot rods and custom trucks running standard width crossmember Mustang II front suspension. Designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved...

Product#: 13168A

1963-96 Chevrolet/GMC 2 Wheel DriveTruck Lower Control Arm Shaft Kit

Reproduction control arm shaft kit, precision-engineered, and rigorously tested to provide a reliable replacement for the original equipment shaft. Direct replacement fits and functions exactly like the original equipment...

Product#: RSB500

1963-72 Chevrolet/GMC Truck 1" Rear Sway Bar

Sway bar kit for Chevrolet/GMC truck, pickup and SUV models. 1" Sway bars reinforce the suspension, offering improved handling. Easy installation with basic hand tools. Each sway bar set includes proper bushings and mounting...

Product#: 154632

Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion

Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...