1965 Ford Ranchero Parts

This short wire harness bolts to the back of the alternator/generator and plugs into the headlamp harness. Features correct color coded wiring.

Reproduction steering idler arm for 1964-66 Ford and Mercury 8-cylinder models with manual or power steering including Mustang, Falcon, Ranchero, and Comet. Idler arms support the entire steering system by connecting directly to the frame of the vehicle. A worn idler arm can can cause harsh vibrations and soft or wobbly steering. This direct replacement idler arm is designed to meet or exceed the original piece in fit and function. It will not only outperform the factory part but this high-quality idler arm will outlast it. One per vehicle, sold individually. Ford/Mercury Applications: Ford Cars: 1964-66 Mustang 1965 Falcon 1965 Falcon Sedan Delivery 1965 Ranchero Mercury Cars: 1965 Comet 1965 Cyclone 1965 Villager

This short wire harness bolts to the back of the alternator and plugs into the headlamp harness. Features correct color coded wiring.

Reproduction of the original headlamp bezel designed for 1965 Falcon/Ranchero. These reproduction headlamp doors trim the area around each headlamp. Authentically manufactured to replicate the original in detail for a correct fit and authentic appearance. Sold individually. 2 required per vehicle.

Reproduction engine gauge feed wiring loom for 1965 Ford Falcon and Ranchero models with V8 engines. This engine gauge feed harness plugs into the upper firewall connector and then connects to the brake light switch located on the master cylinder, the engine oil pressure sending unit, water temperature sending unit and the coil. It also connects to the heater blower motor and the ignition and starter terminals of the starter relay. Replaces Ford part# C5DZ-14289-B.{fitment}

Reproduction of the original equalizer bar to clutch release lever rod designed for use on 1965 Mustang, Fairlane, Comet, and Falcon. This reproduction rod links the equalizer bar to the clutch pedal mechanism. Measures 6-5/16" long. Replaces Ford part# C2OA-7521-A. {fitment}

Reproduction prebent steel gas line for 1965 Ford Ranchero models. It is direct replacement for the hardlines used on 260 and 289 cid V8 powered hard tops. This line runs from the rear of the vehicle to the front, connecting the fuel tank to the fuel pump. They are constructed from high-quality steel tubing and feature all the correct bends and fittings for an easy installation. {fitment}

Direct replacement headliner for 1965 Ford Ranchero. These headliners are manufactured following factory original patterns and crafted from reproduced factory materials that maintain the original quality, look, and feel. This OE style 2-bow headliner features factory color matched Crater grain vinyl construction and installs exactly like the original. They are designed with three inches of excess fabric around the perimeter to ease installation. 36 month limited manufacturer warranty. Note:Bows and other hardware must be reused or purchased separately. Windlace sold separately. Important: Professional installation recommended.

Reproduction of the 1963-68 "289" front fender emblems. This pin-on style emblem will install in same location as original. Manufactured in cold-forged aluminum and anodized in clear, this emblem is considered "concours correct". Ford Applications: 1963-64 Fairlane 1964-66 Mustang 1965 Ranchero 1965 Falcon 1966-68 Bronco

Direct replacement headliner for 1965 Ford Ranchero. These headliners are manufactured following factory original patterns and crafted from reproduced factory materials that maintain the original quality, look, and feel. This OE style 2-bow headliner features factory color matched Crater grain vinyl construction and installs exactly like the original. They are designed with three inches of excess fabric around the perimeter to ease installation. 36 month limited manufacturer warranty. Note:Bows and other hardware must be reused or purchased separately. Windlace sold separately. Important: Professional installation recommended.

Direct replacement headliner for 1965 Ford Ranchero. These headliners are manufactured following factory original patterns and crafted from reproduced factory materials that maintain the original quality, look, and feel. This OE style 2-bow headliner features factory color matched Tier grain vinyl construction and installs exactly like the original. They are designed with three inches of excess fabric around the perimeter to ease installation. 36 month limited manufacturer warranty. Note:Bows and other hardware must be reused or purchased separately. Windlace sold separately. Important: Professional installation recommended.

Distinctive Industries front seat upholstery kit for 1965 Ford Falcon Futura and Ranchero. These seat covers are a correct reproduction of the factory pieces, crafted from the original 32 oz. Sierra grain vinyl, with the correct heat sealed vertical patterns and 6 stitch per inch stitching. Important: This kit is for the front seat upholstery only. Classic Industries recommends replacing all seat covers at the same time. Professional installation is also highly recommended.

Direct replacement headliner for 1965 Ford Ranchero. These headliners are manufactured following factory original patterns and crafted from reproduced factory materials that maintain the original quality, look, and feel. This OE style 2-bow headliner features factory color matched Tier grain vinyl construction and installs exactly like the original. They are designed with three inches of excess fabric around the perimeter to ease installation. 36 month limited manufacturer warranty. Note:Bows and other hardware must be reused or purchased separately. Windlace sold separately. Important: Professional installation recommended.

Direct replacement headliner for 1965 Ford Ranchero. These headliners are manufactured following factory original patterns and crafted from reproduced factory materials that maintain the original quality, look, and feel. This OE style 2-bow headliner features factory color matched Tier grain vinyl construction and installs exactly like the original. They are designed with three inches of excess fabric around the perimeter to ease installation. 36 month limited manufacturer warranty. Note:Bows and other hardware must be reused or purchased separately. Windlace sold separately. Important: Professional installation recommended.

Distinctive Industries front seat upholstery kit for 1965 Ford Falcon Futura and Ranchero. These seat covers are a correct reproduction of the factory pieces, crafted from the original 32 oz. Sierra grain vinyl, with the correct heat sealed vertical patterns and 6 stitch per inch stitching. Important: This kit is for the front seat upholstery only. Classic Industries recommends replacing all seat covers at the same time. Professional installation is also highly recommended.

Reproduction power steering pressure line hose assembly for various 1964-66 Ford models including Mustang, Falcon, and Ranchero. This hose connects the high pressure side of the power steering pump to the control valve. Old, worn out hoses not only leak fluid but starve the rest of the system of fluid impeding performance and increasing wear. Replacing them with new hoses can restore system performance and eliminate annoying leaks. Ford Application 1964-66 Mustang (200 cid only) 1965 Falcon 1965 Falcon Sedan Delivery 1965 Ranchero

Direct replacement headliner for 1965 Ford Ranchero. These headliners are manufactured following factory original patterns and crafted from reproduced factory materials that maintain the original quality, look, and feel. This OE style 2-bow headliner features factory color matched Crater grain vinyl construction and installs exactly like the original. They are designed with three inches of excess fabric around the perimeter to ease installation. 36 month limited manufacturer warranty. Note:Bows and other hardware must be reused or purchased separately. Windlace sold separately. Important: Professional installation recommended.

Distinctive Industries front seat upholstery kit for 1965 Ford Falcon Futura and Ranchero. These seat covers are a correct reproduction of the factory pieces, crafted from the original 32 oz. Sierra grain vinyl, with the correct heat sealed vertical patterns and 6 stitch per inch stitching. Important: This kit is for the front seat upholstery only. Classic Industries recommends replacing all seat covers at the same time. Professional installation is also highly recommended.

Direct replacement headliner for 1965 Ford Ranchero. These headliners are manufactured following factory original patterns and crafted from reproduced factory materials that maintain the original quality, look, and feel. This OE style 2-bow headliner features factory color matched Tier grain vinyl construction and installs exactly like the original. They are designed with three inches of excess fabric around the perimeter to ease installation. 36 month limited manufacturer warranty. Note:Bows and other hardware must be reused or purchased separately. Windlace sold separately. Important: Professional installation recommended.

Direct replacement headliner for 1965 Ford Ranchero. These headliners are manufactured following factory original patterns and crafted from reproduced factory materials that maintain the original quality, look, and feel. This OE style 2-bow headliner features factory color matched Tier grain vinyl construction and installs exactly like the original. They are designed with three inches of excess fabric around the perimeter to ease installation. 36 month limited manufacturer warranty. Note:Bows and other hardware must be reused or purchased separately. Windlace sold separately. Important: Professional installation recommended.

Reproduction pitman arm for 1965-67 Ford Mustang, Falcon, and Mercury Cougar 8-cylinder models with power steering. The pitman arm connects the steering box to the drag link and the rest of the steering system. A worn pitman arm can cause poor steering, improper alignment, and premature wear on other parts of the system. This direct replacement arm is designed to meet or exceed the original piece in fit and function. It will not only outperform the factory part but this high-quality pitman arm will outlast it as well. One per vehicle, sold individually. Ford / Mercury Applications: 1965-67 Mustang (except GT350) 1965 Falcon 1967 Cougar 1965 Comet Fitment note: Pitman arm is designed for use on early 1967 Mustangs and Cougars with 1" sector shafts. Not designed for use with 1-1/8" sector shafts.

Direct replacement headliner for 1965 Ford Ranchero. These headliners are manufactured following factory original patterns and crafted from reproduced factory materials that maintain the original quality, look, and feel. This OE style 2-bow headliner features factory color matched Tier grain vinyl construction and installs exactly like the original. They are designed with three inches of excess fabric around the perimeter to ease installation. 36 month limited manufacturer warranty. Note:Bows and other hardware must be reused or purchased separately. Windlace sold separately. Important: Professional installation recommended.

Distinctive Industries door panels for 1965 Ford Falcon and Ranchero. These panels are correct reproductions of the originals with the correct Sierra grain in 32 oz. vinyl, correct Mylar®, and correct heat sealed vertical patterns used by the factory. They feature poly-coated “Autoboard” backing boards and are perimeter stapled for maximum adhesion.

Replacement rear drum brake wheel cylinder for various 1959-72 Ford and Mercury models including Mustang, Falcon, Maverick, and Comet. It is intended for use on 9” drums with 2-1/4” wide shoes. This cylinder is manufactured to meet or exceed the factory specifications for fit and performance. Sold individually. Installs on the right hand (passenger side). Ford/Mercury Applications: Ford Cars: 1964-70 Mustang 1962-70 Falcon 1963-65 Falcon Sedan Delivery 1962-70 Fairlane 1965 Ranchero 1959-60 Thunderbird 1968-71 Torino Mercury Cars: 1970-72 Cougar 1963-70 Comet 1964-71 Cyclone 1964-67 Caliente 1962-63 Meteor Fitment note: Fits 1964-66 Mustang 8 cylinder.

Direct replacement headliner for 1965 Ford Ranchero. These headliners are manufactured following factory original patterns and crafted from reproduced factory materials that maintain the original quality, look, and feel. This OE style 2-bow headliner features factory color matched Tier grain vinyl construction and installs exactly like the original. They are designed with three inches of excess fabric around the perimeter to ease installation. 36 month limited manufacturer warranty. Note:Bows and other hardware must be reused or purchased separately. Windlace sold separately. Important: Professional installation recommended.

Master engine fastener kits for your Vintage Ford. The authentic hardware you need to correctly reassemble the engine components that attach to the long block. Most fasteners are either meticulous reproductions or NOS-New Old...

Direct replacement headliner for 1965 Ford Ranchero. These headliners are manufactured following factory original patterns and crafted from reproduced factory materials that maintain the original quality, look, and feel. This OE style 2-bow headliner features factory color matched Tier grain vinyl construction and installs exactly like the original. They are designed with three inches of excess fabric around the perimeter to ease installation. 36 month limited manufacturer warranty. Note:Bows and other hardware must be reused or purchased separately. Windlace sold separately. Important: Professional installation recommended.

Direct replacement headliner for 1965 Ford Ranchero. These headliners are manufactured following factory original patterns and crafted from reproduced factory materials that maintain the original quality, look, and feel. This OE style 2-bow headliner features factory color matched Tier grain vinyl construction and installs exactly like the original. They are designed with three inches of excess fabric around the perimeter to ease installation. 36 month limited manufacturer warranty. Note:Bows and other hardware must be reused or purchased separately. Windlace sold separately. Important: Professional installation recommended.

Replacement arm rest clip for various 1965-72 Ford and Mercury models including Mustang, Falcon, and Bronco. Replaces Ford part# C6AZ-6224146.{fitment}

Direct replacement headliner for 1965 Ford Ranchero. These headliners are manufactured following factory original patterns and crafted from reproduced factory materials that maintain the original quality, look, and feel. This OE style 2-bow headliner features factory color matched Crater grain vinyl construction and installs exactly like the original. They are designed with three inches of excess fabric around the perimeter to ease installation. 36 month limited manufacturer warranty. Note:Bows and other hardware must be reused or purchased separately. Windlace sold separately. Important: Professional installation recommended.

Distinctive Industries front seat upholstery kit for 1965 Ford Falcon Futura and Ranchero. These seat covers are a correct reproduction of the factory pieces, crafted from the original 32 oz. Sierra grain vinyl, with the correct heat sealed vertical patterns and 6 stitch per inch stitching. Important: This kit is for the front seat upholstery only. Classic Industries recommends replacing all seat covers at the same time. Professional installation is also highly recommended.

Master engine fastener kits for your Vintage Ford. The authentic hardware you need to correctly reassemble the engine components that attach to the long block. Most fasteners are either meticulous reproductions or NOS-New Old...

Replacement oil pump intermediate shaft assembly for numerous 1965-82 Ford and Mercury models including Mustang, Falcon, Comet, and Bronco. This 5/16" hex drive shaft assembly includes the retaining ring and is direct fit...

Distinctive Industries front seat upholstery kit for 1965 Ford Falcon Futura and Ranchero. These seat covers are a correct reproduction of the factory pieces, crafted from the original 32 oz. Sierra grain vinyl, with the correct heat sealed vertical patterns and 6 stitch per inch stitching. Important: This kit is for the front seat upholstery only. Classic Industries recommends replacing all seat covers at the same time. Professional installation is also highly recommended.

Reproduction of the original clutch equalizer bar designed for use on 1965 Ford Falcons, Rancheros, and Comets with 289 or 302 V8 engines. This bell crank is manufactured to exact specifications for a perfect fit. Applications: 1965 Falcon 1965 Ranchero 1965 Comet

Reproduction driver side outer tie rod end for various 1963-66 Ford and Mercury 6-cylinder models with power steering including Mustang, Falcon, Ranchero and Comet. Worn tie rod ends can cause excessive play or vibration in...

Reproduction of the chrome fender emblem for various 1964-68 Ford models. Our fender ornaments add a finishing touch to your classic Ford. Die-cast then chrome plated and polished to perfection prior to hand painting the black accent color. Sold individually. Two required per vehicle. Mounting hardware is included. Ford Applications: 1963-64 Fairlane 1964-66 Mustang 1965 Ranchero 1965 Falcon 1966-68 Bronco

Distinctive Industries front seat upholstery kit for 1965 Ford Falcon Futura and Ranchero. These seat covers are a correct reproduction of the factory pieces, crafted from the original 32 oz. Sierra grain vinyl, with the correct heat sealed vertical patterns and 6 stitch per inch stitching. Important: This kit is for the front seat upholstery only. Classic Industries recommends replacing all seat covers at the same time. Professional installation is also highly recommended.

1964-1965 Cyclone

Formulated specifically for hard plastic and metal interior components, this acrylic lacquer interior paint is packaged in 12oz. aerosol spray cans. AccuMatch Interior Paints are the result of years of work and perfectly...

Reproduction 15" 3-spoke steering wheel for 1965-66 Mustang models with alternator charging system. Manufactured to factory specifications out of injection molded plastic, featuring original style contours and finish for...

Reproduction taillight lens assembly for 1965 Ford Falcon Wagon, and Ranchero. This lens features durable die-cast construction with a bright chrome bezel. Includes the gaskets and retainer. Replaces Ford part# C5DZ-13450-E.{fitment}

Direct replacement headliner for 1965 Ford Ranchero. These headliners are manufactured following factory original patterns and crafted from reproduced factory materials that maintain the original quality, look, and feel. This OE style 2-bow headliner features factory color matched Tier grain vinyl construction and installs exactly like the original. They are designed with three inches of excess fabric around the perimeter to ease installation. 36 month limited manufacturer warranty. Note:Bows and other hardware must be reused or purchased separately. Windlace sold separately. Important: Professional installation recommended.

Direct replacement headliner for 1965 Ford Ranchero. These headliners are manufactured following factory original patterns and crafted from reproduced factory materials that maintain the original quality, look, and feel. This OE style 2-bow headliner features factory color matched Crater grain vinyl construction and installs exactly like the original. They are designed with three inches of excess fabric around the perimeter to ease installation. 36 month limited manufacturer warranty. Note:Bows and other hardware must be reused or purchased separately. Windlace sold separately. Important: Professional installation recommended.

Reproduction water pump mounting bolt set for 1965 Ford 8-Cylinder, 260ci, or 289ci engine with alternator, AC, and aluminum water pump. Each hex head bolt kit consists of 16 pieces of hardware (9 bolts, 6 washers, and 1 spacer) needed to mount the water pump to your 1965 Ford 260ci, or 289ci engine with alternator, AC, and aluminum water pump.

Exact reproduction of the original plate rear spring shock mount plate designed for use on 1965-66 Mustangs. Attaches under the rear leaf spring pack, and provides the lower mounting point for the rear shock absorber. Each...

Distinctive Industries front seat upholstery kit for 1965 Ford Falcon Futura and Ranchero. These seat covers are a correct reproduction of the factory pieces, crafted from the original 32 oz. Sierra grain vinyl, with the correct heat sealed vertical patterns and 6 stitch per inch stitching. Important: This kit is for the front seat upholstery only. Classic Industries recommends replacing all seat covers at the same time. Professional installation is also highly recommended.

Reproduction water pump mounting bolt set for 1965 Ford 8-Cylinder, 260ci, or 289ci engine with alternator, without AC, and with aluminum water pump. Each hex head bolt kit consists of 10 pieces of hardware needed to mount the water pump to your 1965 Ford 260ci, or 289ci engine with alternator, without AC, and with aluminum water pump.

Reproduction fuel pump featuring all-new internal and external components and integral filter. This is a brand new unit, not a rebuild or remanufactured pump. And, it's been factory-tested for reliability, so you can rest easy knowing this brand new fuel pump will work just like the factory intended providing years of service like the factory original fuel pump. Product Specifications: OE Appearance and Proper Fit Original Inlet and Outlet Positions Accurate Diameter and Length Factory-Tested for Reliability Factory-Specified Pressure and Flow Includes a Canister Ford Applications: 1965 Country Squire - 289ci 1969-72 F100 - 302ci 1962-64 Fairlane - 260ci 1963-65 Fairlane - 289ci 1963-65 Falcon - 260ci, 289ci 1963 Ford 300 - 260ci, 289ci 1964 Galaxie - 260ci 1963-65 Galaxie - 289ci 1964 Mustang - 260ci 1964-65 Mustang - 289ci 1965 Ranchero - 289ci Mercury Applications: 1963-64 Comet - 260ci 1964-65 Comet - 289ci 1964 Cyclone - 260ci 1964-65 Cyclone - 289ci 1963 Meteor - 221ci

Distinctive Industries door panels for 1965 Ford Falcon and Ranchero. These panels are correct reproductions of the originals with the correct Sierra grain in 32 oz. vinyl, correct Mylar®, and correct heat sealed vertical patterns used by the factory. They feature poly-coated “Autoboard” backing boards and are perimeter stapled for maximum adhesion.

Direct replacement headliner for 1965 Ford Ranchero. These headliners are manufactured following factory original patterns and crafted from reproduced factory materials that maintain the original quality, look, and feel. This OE style 2-bow headliner features factory color matched Tier grain vinyl construction and installs exactly like the original. They are designed with three inches of excess fabric around the perimeter to ease installation. 36 month limited manufacturer warranty. Note:Bows and other hardware must be reused or purchased separately. Windlace sold separately. Important: Professional installation recommended.

Reproduction of the original headlamp dash headlight knob and insert designed for use on various Ford/Mercury models including 1964 Falcon, Ranchero, and Comet models. Manufactured to original specifications to insure an authentic replacement. Injection molded knob with plastic insert and shaft. Originally installed on vehicles with standard interiors. Replaces Ford part# C5DZ-11661-B. Ford Applications: 1965 Falcon 1965 Ranchero Mercury Applications: 1965 Comet 1965 Villager

OER®'s revolutionary formula for Ford vehicles provides 40% more coverage than standard dyes and lacquers, and actually penetrates and molecularly bonds to the surface to permanently seal in the color. Engineered to...

Reproduction grill ornament for 1965 Ford Falcon and Ranchero. These highly accurate reproductions feature red, white and blue vertical stripes with three white falcons and a black surround. Sold each. Applications: 1965 Falcon 1965 Falcon Sedan Delivery 1965 Ranchero

Classic Auto Air Daily Driver under-dash air conditioning system for 1965-66 Ford and Mercury 6-cylinder models. Applications include 1965-66 including Mustangs, and 1965 Falcons, Rancheros, and Comets with 144, 170, or 200 cid straight-6 engines. This system is designed for originality with a four vent evaporator unit that resembles the factory hang-down A/C units. It feature a 4-vent evaporator unit with an extra large coil that provides excellent air volume and temp. Much like the factory system, it operates independently of the heat and defrost systems, making for a much simpler install. This is one of the most comprehensive and easy to install systems on the market. Kit Contents: Under dash air conditioning unit & mount Rotary compressor Compressor mount Condenser & brackets Filter drier & bracket Firewall grommets Wire harness Condensation drain tube Binary safety switch All fittings, hoses & tubes (suction, discharge & liquid) Installation instructions Note: For some engine configurations additional pulleys may be required..

Distinctive Industries door panels for 1965 Ford Falcon and Ranchero. These panels are correct reproductions of the originals with the correct Sierra grain in 32 oz. vinyl, correct Mylar®, and correct heat sealed vertical patterns used by the factory. They feature poly-coated “Autoboard” backing boards and are perimeter stapled for maximum adhesion.

Distinctive Industries door panels for 1965 Ford Falcon and Ranchero. These panels are correct reproductions of the originals with the correct Sierra grain in 32 oz. vinyl, correct Mylar®, and correct heat sealed vertical patterns used by the factory. They feature poly-coated “Autoboard” backing boards and are perimeter stapled for maximum adhesion.

Direct replacement headliner for 1965 Ford Ranchero. These headliners are manufactured following factory original patterns and crafted from reproduced factory materials that maintain the original quality, look, and feel. This OE style 2-bow headliner features factory color matched Tier grain vinyl construction and installs exactly like the original. They are designed with three inches of excess fabric around the perimeter to ease installation. 36 month limited manufacturer warranty. Note:Bows and other hardware must be reused or purchased separately. Windlace sold separately. Important: Professional installation recommended.

Distinctive Industries door panels for 1965 Ford Falcon and Ranchero. These panels are correct reproductions of the originals with the correct Sierra grain in 32 oz. vinyl, correct Mylar®, and correct heat sealed vertical patterns used by the factory. They feature poly-coated “Autoboard” backing boards and are perimeter stapled for maximum adhesion.

Distinctive Industries front seat upholstery kit for 1965 Ford Falcon Futura and Ranchero. These seat covers are a correct reproduction of the factory pieces, crafted from the original 32 oz. Sierra grain vinyl, with the correct heat sealed vertical patterns and 6 stitch per inch stitching. Important: This kit is for the front seat upholstery only. Classic Industries recommends replacing all seat covers at the same time. Professional installation is also highly recommended.