Product#: UK915

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long

This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...


Product#: FT6014B

1972-73 Charger, Coronet, Road Runner, Satellite, Sebring; Niterne Coated Fuel Tank; 4 Front Vent Tubes; 19 Gallon Capacity; For Models Produced from April, 1972

Reproduction of the original fuel tank designed for use with 1972-1973 Charger, Coronet, Road Runner, Regent, Satellite, Sebring, and Crestwood, models. This is a 19-gallon fuel tank with 4 front vent tubes on the tank. This...


Product#: FT6008C

1966-67 Charger, Coronet, Satellite, Belvedere, GTX; Fuel Tank; Stainless Steel; 19 Gallon Capacity

Correct reproduction of the original fuel tank designed for with 1966-67 Charger, Coronet, Satellite, Belvedere, GTX models. This reproduction fuel tank is manufactured in stainless steel replicating the original GM tank...


Product#: MF297

1970-75 Dodge, Plymouth A, B, E Body; Fuel Tank Filler Neck Grommet

Reproduction fuel tank to filler neck rubber grommet to replace the old or worn out original. Replace brittle or deteriorated fuel tank filler neck grommets with this quality reproduction grommet to eliminate vapor or fuel...


Product#: AL124

Accelerator Throttle Rod; Universal Fit

Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...


Product#: FT6010B

1970 Charger With EEC 19 Gallon Fuel Tank - Niterne Coated Steel (4 Side Vent Tubes)

Replacement fuel tank for 1970 Charger models. These are manufactured in niterne plated steel (as original) and designed to fit like factory-installed. Includes four vent tubes on left side of tank. Includes lock ring and...


Product#: FT6009B

1968-70 Charger, Charger 500, Daytona, R/T, SE; Niterne Coated Fuel Tank; w/o EEC; w/o Vent Tubes; 19 Gallon Capacity

Reproduction of the original fuel tank designed for use with 1968-70 Dodge Charger models without EEC. This fuel tank is manufactured in plated steel featuring a niterne coating same as original. Designed to replicate the...


Product#: MM8271

1960-1976 Chrysler, Dodge, Plymouth; Fuel Tank Mounting Studs ; Pair; OER

Reproduction of the original style fuel tank mounting studs designed for use on various 1960-1976 Mopar models. Fuel tank mounting studs, also known as J-bolts, are required when replacing your fuel tank straps. Manufactured...


Product#: FT6008A

1966-67 Charger, Coronet, Belvedere, GTX; Zinc Coated Fuel Tank; 19 Gallon Capacity

Correct reproduction of the original fuel tank designed for with 1966-67 Dodge Charger, Coronet, and Plymouth Belvedere, and GTX models. This reproduction fuel tank is manufactured in stamped steel featuring a Zinc coating...


Product#: FT6013B

1971-72 Charger, Coronet, GTX, Road Runner; Niterne Coated Fuel Tank; 4 Side Vent Tubes; 19 Gallon

Reproduction of the original fuel tank designed for use with 1971-72 Dodge and Plymouth Charger, Coronet, Road Runner, and Satellite models. This is a 19-gallon fuel tank with four vent pipes on the side of the tank. This...


Product#: FT6009A

1968-70 Dodge Charger; Zinc Coated; Fuel Tank; w/o EEC; 19 Gallon; No Vent Tubes

Reproduction of the original fuel tank designed for use with 1968-70 Dodge Charger models without EEC. This fuel tank is manufactured in plated steel featuring a zinc coating same as original. Designed to replicate the...


Product#: MF362

1969-70 Charger, 1969 Barracuda; Quick-Fill Fuel Cap; with "Fuel" wording

Reproduction "Quick-Fill" fuel cap for 1969-70 Charger and 1969 Plymouth Barracuda models. Manufactured using factory specifications with great attention to detail, these vented replacement fuel caps offer a 'like-factory'...


Product#: MF363

1967-68 Barracuda, Charger, GTX; Quick-Fill Fuel Cap

Reproduction "Quick-Fill", also known as the "Flip Top" fuel cap for 1967-68 Plymouth Barracuda, 1967 GTX and 1968 Charger models. Manufactured using factory specifications with great attention to detail, this replacement...


Product#: MF290

1962-76 Dodge, Plymouth; Fuel Sending Unit Ground Strap; 3-3/4" Steel

Reproduction of the original fuel tank sending unit ground strap designed for use with most 1962-76 Dodge and Plymouth A-body, B-body and E-body models. Attaches near the short fuel hose that joins the fuel tank sender line...


Product#: C67808

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps

Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...


Product#: MF436

1968-70 Charger, Coronet, GTX, Road Runner, Belvedere; Fuel Tank Sending Unit; 5/16" Outlet

After years of use, your fuel sending unit can wear out or stop working. When that happens, it can cause significant issues for the fuel gauge. Ensure that you always know how much fuel you actually have by replacing your...


Product#: MF438

1971-73 Dodge, Plymouth B-Body; Standard Fuel Tank Sending Unit; with 3/8" Outlet, 1/4" Return Line

After years of use, your fuel sending unit can wear out or stop working. When that happens, it can cause significant issues for the fuel gauge. Ensure that you always know how much fuel you actually have by replacing your...


Product#: MF435

1966-67 Charger, Coronet, Belvedere, Satellite; Fuel Tank Sending Unit; 3/8" Outlet

After years of use, your fuel sending unit can wear out or stop working. When that happens, it can cause significant issues for the fuel gauge. Ensure that you always know how much fuel you actually have by replacing your...


Product#: MF294

1962-76 Dodge, Plymouth A, B, E Body; Fuel Sending Unit Rubber Seal; 2-1/4" ID

Reproduction of the original rubber fuel sending unit seal designed for use with 1962-76 Dodge and Plymouth A, B, and E Body models. Replaces original Mopar part number # 1948757. We suggest replacing this seal every few...


Product#: MB1684

1968-70 Dodge Charger; Fuel Tank Filler Neck Seal

Reproduction fuel filler neck to trunk floor seal for 1968-70 Charger models. Designed to keep out fumes and road debris, this seal attaches to the inside of the trunk floor and the fuel filler neck passes thru it....