Product#: 3415

Bumper Bolt with Conical Keps Hex Nut; Polished Stainless Steel Capped Head; 3/4" Diameter; 3/8-16" x 1"; Zinc Plated

Reproduction GM bumper bolt for a variety of General Motors and Chrysler applications. Each zinc-plated steel carriage bolt features a polished stainless steel cap for superb cosmetic appearance, corrosion resistance and long...

Product#: 2710

Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head

Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...

Product#: 8610

Flat Washer; 1/2" USS; Zinc Plated

1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...

Product#: 13757

1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon

Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...

Product#: 10362

Bolt, 5/16-18 x 13/16" Pointed Tip With Hex Washer Head, Black Phosphate

OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...

Product#: 3899508

1959-80 Trico Windshield Wiper Blade; 15" Length; Various Models; Each

Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...

Product#: CX1465

1955-59 Chevy, Ford; Windshield Wiper Blade; 12"; Triple-Action; Wrist-Action Connector; Stainless

Reproduction windshield wiper blade 2nd design 1955 models, and all 56-59 truck models. This blade is also correct replacement for a wide variety of other makes and models, including 1955-57 GM Passenger models Bel Air, 150,...

Product#: K51020

1962-76 GM, Dodge, Plymouth; Various Models; Convertible Top Boot Storage Bag

Why leave your top boot in the trunk exposed when you can keep it safe and clean by safely storing it in this special top boot storage bag. The storage bag will help protect your vehicles top boot while being stored in the...

Product#: 3819074

1958-80 TRICO RF-15 Style Wiper Blade Refill; 15" Length; Reproduction; Various Models

OER® reproduction of the original Trico RF-15 wiper blade insert/refill for 15" TRICO wiper blades. This period-correct TRICO RF-15 style insert is made with a stainless steel vertebra and a precision wiping edge produced...

Product#: 11503957

U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each

Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...

Product#: TR17757W1

1992-96 F-150 / F-250 / F-350 / Bronco Front Bumper; Chrome; Without Pad Holes; With License Plate Bracket Holes

Reproduction front bumper without impact strip holes for 1992-96 Ford F-Series Truck and Bronco. This bumper features heavy gauge cold rolled steel construction with the correct mounting holes for the factory mounting...

Product#: A1017

3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each

Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...

Product#: K164

Windshield Wiper Blades; Aero Style; 15"; for 1/4" (7mm) Bayonet Style Arms; Pair; Various Models

High quality reproduction of the stainless steel "Aero" Anti Wind-Lift Wiper Blades designed to fit 7mm wide bayonet style wiper arms. Popularized in the 1960's and 70's to combat wind lift at high speeds, these 15 inch wiper...

Product#: TR17757S1

1980-86 Ford F150, F250, F350, Bronco; Front Bumper w/o Impact Strip Holes; Chrome

Reproduction of the original chrome front bumper for 1980-86 Ford F150, F250, F350, and Bronco models without impact strip holes. This bumper features heavy gauge cold rolled steel construction with the correct mounting holes...

Product#: 17779KC

1992-98 Ford F-Series Pickup, Bronco; Front Bumper Stone Deflector; Upper; Heavy Gauge; Chrome

Reproduction upper front stone deflector for 1992-98 Ford Pickup, and 1992-96 Bronco models. Stone deflectors are manufactured in heavy gauge stamped steel to factory specifications replicating the original in quality and...

Product#: TR17757V

1992-96 Ford F-Series F-150 / F-250 / F-350 Truck, Bronco Front Bumper, With Pad Holes; Paintable

Reproduction front bumper with impact strip holes for 1992-96 Ford F-Series Truck and Bronco. This bumper features heavy gauge cold rolled steel construction with the correct mounting holes for the factory mounting brackets...

Product#: TR17757V1

1992-96 Ford F-Series F-150 / F-250 / F-350 Truck, Bronco Front Bumper; Without Pad Holes; Paintable

Reproduction front bumper without impact strip holes for 1992-96 Ford F-Series Truck and Bronco. This bumper features heavy gauge cold rolled steel construction with the correct mounting holes for the factory mounting...

Product#: DW687C

1967-79 Ford F100, F150, F250, F350, F500 Pickup, 1978-79 Bronco; Front Windshield Glass; Clear

OER reproduction of the original front windshield glass for various 1967-79 Ford F100, F150, F250, F350 Pickup trucks, and 1978-79 Bronco models. This windshield is manufactured with tempered laminate safety glass that meets...

Product#: DB6070C

1980-96 Ford Bronco; Rear Window Glass; Non-Heated; Clear; OER

OER reproduction of the original back window glass designed for use with Ford Bronco models. Each glass is manufactured with the proper shape, curvature, and pattern in OEM equivalent material. Replace scratched, damaged or...

Product#: A3102

1938-91 GM; 1948-79 Ford; Bumper Bolt & Nut; Stainless Steel Capped; 1/2"-13 x 1-1/2"; Low Dome; Various Models

Replacement style stainless steel capped bumper bolt and nut designed for use on many GM vehicles. Each bolt measures 1/2"-13 x 1-1/2"; 1-1/8" head diameter and comes complete with attaching nut. Can be used for a wide...