1966 Chevrolet C10 Panel Parts - Steering

Our Power Steering Conversion Hose kit is designed to fit the GM Saginaw power steering pump with inverted flare pressure fitting. It also fits the GM 500, 605, 800 and 600 Series power steering gear box! These hose kits are...

This OER® line clamp is manufactured from die stamped steel. Each piece is plated in clear zinc to help protect it from rust and corrosion. Clip slips over the high pressure line and is secured to the gear box top cover...

This is a reproduction of the mounts for 1957-64 Chevrolet full size, 1960-68 GM truck, and 1962-67 Chevy II/Nov that attach the power steering cylinder to the frame mount bracket. Set contains: (2) rubber bushings, (2)...

Reproduction power steering pulley washer and nut. This lock-nut and washer set is needed to secure the power steering pulley to the pump. Measures 9/16" - 18. Pre-packaged in OER polytube. 1967-75 Camaro 1967-75 Firebird...

Reproduction power steering slave cylinder for 1957-64 Chevrolet full size, 1960-68 GM truck, and 1962-67 Chevy II/Nova models. Our most economical solution to keep your power steering system functioning. IMPORTANT: Flush...

Reproduction power steering slave cylinder for 1957-64 Chevrolet full size, 1960-68 GM truck, and 1962-67 Chevy II/Nova models. Engineered to OE specifications of the original to keep your power steering system functioning...

1963-66 Chevy and GMC truck power steering conversion kit. Power steering box, pump, pump bracket, box bracket, hoses, rag joint, and pitman arm included. Chevy Applications: 1963-66 C10 Pick Up 1963-66 Suburban GMC...

Reproduction of the original steering column coupler components commonly known as the rag joint. These special components can be a weak link between the steering column and the steering gear box. Each set includes the correct...

Convenient set of hardware for steering shaft couplers on many GM vehicles. Set includes the (1) 3/8"-24 hex nut and lock washer and (1) 5/16"-24 nut and lock washer. Also includes the 12-point coupler bolt that secures the...

OER® reproduction of the original small block power steering adjustor bracket for use with various 1965-68 GM small block models. Manufactured in stamped steel, this bracket was original installed for a variety of...

Power steering conversion bracket kit for 1960-66 Chevrolet and GMC pickup trucks. This kit includes brackets to install a 1967-87 2wd 1/2 ton GM truck steering box to the front of the axle and outboard the frame rail. Minor...

Correct reproduction of the original power steering pump cradle bracket designed for use with 1965-69 Chevrolet models with small block engines. Manufactured to OE specifications for original fit and finish. For use on small...

Quality reproduction of the original pitman arm designed for 1960-66 Chevrolet C10 and GMC Pickup. Manufactured to exact factory specifications. Each assembly features heat treated components and forging, and precision...

Reproduction power steering pump mounting bracket attaching bolt kit, attaches (#E278 bracket kit) to engine block. Includes (2) 3/8-16 x 3" black phosphate grade 5 bolts, (1) 3/8-16 x 3/4" zinc grade 5 bolt, (2) flat...

This 11 piece set includes the o-rings, gaskets, seals, hardware and washers you will need to install a reservoir on your saginaw power steering pump. This set has chrome hardware that are designed to be used with a chrome...

This is the O-ring set for Saginaw power steering pumps. Includes 8 pieces to re-seal the pump to the reservoir. Does not include the shaft seal. Fits most Saginaw pumps through 1977 including Saginaw P series. {fitment}

Reproduction tie-rod adjusting sleeve for various GM models. Restore vehicle handling, and OE alignment by replacing worn tie rod components which will reduce tire wear, and improves steering response. Measures 6.5" long. Sold individually. Fits left hand (driver side) or right hand (passenger side). Specifications: Tie Rod End Thread: 5/8-18 Length: 6.500 Inside Diameter: 0.625 Hardware Included: Yes Package Contains: 1 Sleeve, 2 Clamps, 2 Bolts, 2 Lock Nuts Chevrolet Truck Applications: 1965-67 C10 Panel with Power Steering 1965-68 C10 Pickup with Power Steering 1965-66 Suburban Power Front with Power Steering 1967-68 C10 Suburban with Power Steering 1967 C20 Panel with Power Steering 1967-68 C20 Pickup with Power Steering 1967-68 C20 Suburban with Power Steering 1967-70 C30 Pickup Power Front 1965-67 P10-Series with Power Steering 1967-68 P10 Van with Power Steering 1968 P20 Van with Power Steering 1968 P30 Van with Power Steering GMC Truck Applications: 1967 C15/C1500 Pickup 1/2 Ton with Power Steering 1967 C25/C2500 Pickup with Power Steering 1966 P1000 with Power Steering 1967-70 P15/P1500 Van with Power Steering 1966 PB1000 Series with Power Steering 1966 PB15 Series with Power Steering

This 11 piece set includes the o-rings, gaskets, seals, hardware and washers you will need to install a reservoir on your saginaw power steering pump. This set has unfinished hardware that are designed to be used with a...

This is the hose adapter fitting for Saginaw power steering gear box or pump. Straight, inverted flare zinc coated steel, 5/8"-18 to -6AN. Fits most Saginaw gear boxes or pumps 1960 through 1977 including Saginaw P series. ...

Reproduction of the original power steering pump adjustor bracket designed for use with 1961-64 Impala, Bel Air, Biscayne, 1965-67 Chevy II Nova, 1964-67 Chevy, GMC trucks, and 1964-65 Corvette small block models. Rach...

Reproduction original power steering pump cap for various 1961-72 Buick, Chevrolet, GMC, Pontiac, and Oldsmobile models as listed. This is not a factory service replacement or aftermarket cap, this is a genuine reproduction...

If you're looking for a power steering pump for your classic vehicle and are finding that your part has become obsolete and cores for reman units are unavailable, you can now replace that obsolete pump with a brand-new...

This convenient 1/4" steel power steering bracket set is designed for mounting GM Saginaw power steering pumps, with integral reservoir, to small block Chevy engines. Features a polished chrome finish. Universal LH side...

This is the stud and bolt kit for Saginaw power steering pumps. Includes (2) studs (3/8"-16 thread), (1) bolt 3/8"-16 thread). Fits most Saginaw pumps through 1977 including Saginaw P series. This set is black phosphate...

This is the stud and bolt kit for Saginaw power steering pumps. Includes (2) studs (3/8"-16 thread), (1) bolt 3/8"-16 thread). Fits most Saginaw pumps through 1977 including Saginaw P series. This set is the chrome plated set...

Replace that dented, leaky or missing reservoir with a brand new reproduction. This reservoir comes with all o-rings and fittings necessary to install on your power steering pump. When appearance is a concern, this OE style...

If you're looking for a power steering pump for your classic vehicle and are finding that your part has become obsolete and cores for reman units are unavailable, you can now replace that obsolete pump with a brand-new...

1965-68 Impala, 1965-70 C10 Pickup; Tie Rod End; Inner; LH/RH

1967-7190 GMC C15/C1500 Suburban (LH/RH Outer) 1970-1970 GMC Jimmy (LH/RH Outer) 1965-1966 GMC Suburban (LH/RH Outer) The OER® Authorized logo represents products that meet or exceed stringent OER® quality control...

1965-67 C10 Pickup; Stabilizer Bar Bushing; Front to Frame; 3/4" Bar

1965-68 Impala and Fullsize; Tie Rod End; Outer; LH/RH

Reproduction of the original inner tie-rod end designed for use with various 1965-70 GM models including 1965-68 Impala, Full Size, and 1965-70 Chevy and GMC truck models. Is your steering loose or front end out of alignment?...

Technically correct in appearance with original factory installed component. OE quality reproduction from Classic Suspensions. Manufactured by an OE supplier to modern technical specifications while offering restorers an...

Quality reproduction idler arm for various 1961-64 Chevrolet Full Size and 1963-66 GM truck models as listed below. This hard-to-find steering linkage component is ideal for rebuilding your stock steering system. Each package...

1963-70 C10 pickup; Ball Joint; Front; Upper

1963-70 C10 Pickup; Ball Joint; Front; Lower

Reproduction of the original style front wheel bearing grease caps designed for use with various 1961-72 Chevrolet models as listed below. Each cap is manufactured from quality stamped steel replicating the "button" wheel...

Replace your worn out original wheel bearings to maintain proper alignment and smooth rolling. Always check the bearings whenever removing the brake drum or rotor. 2 required per vehicle. Applications: 1962-70 C10 With...

Premium quality replacement outer wheel bearing for all 1967-78 Camaro models. Replace your worn out original wheel bearings to maintain proper alignment and smooth rolling. Always check the bearings whenever removing the...

New rack and pinion power steering system for your 1960-66 Classic Chevy and GMC truck. Designed to give you the best steering you can have and provide much higher performance, driver comfort and feedback. This kit is...

Our Power Steering Conversion Hose kit is designed to fit the GM Saginaw power steering pump with inverted flare pressure fitting. It also fits the GM 605, 800 and 600 Series power steering gear box! These hose kits are the...

Our Power Steering Conversion Hose kit is designed to fit the GM Saginaw power steering pump with inverted flare pressure fitting. It also fits the GM 605, 800 and 600 Series power steering gear box! These hose kits are the...

Flaming River stainless steel U-joints and shaft kit. Information: 1" DD X 3/4" DD column U-joint 13/16"- 36 X 34" DD box U-joint 22" Lemgth, 3/4" DD steering shaft Polished finished U-Joint

Our Power Steering Conversion Hose kit is designed to fit the GM Saginaw power steering pump with inverted flare pressure fitting. It fits POL Rack and Pinion and the GM 500, 605, 800 and 600 Series power steering gear box!...

In-line Magna-Pure Filter - Serviceable Magnetic filter element with patented built in bypass for optimal performance; filters up to 190 micron particles. Protects the entire steering system from contmination. Flushing the...

EPAS Performance Hydroelectric Pump System. This system has a program that works with an angle sensor and CAN protocol. The converter talks to the pump via the angle sensor, ramping up the systems pressure as needed. There is...

To complete your ididit steering column installation, you should also replace your rag joint. When installing an ididit column in your car, you must use the correct application to match the column output shaft. Made in USA

This coupler connects the intermediate shaft to the steering column on several GM models with a 1" 48 spline x 3/4" double D shape.

Power steering pump supply hose fitting for 1978-2006 Saginaw power steering pumps requiring a metric style fitting with the o-ring style seal. This fitting is necessary to mount the cover to the pump and connects to the...

Borgeson 3/4"-36 X 13/16"-36 steel steering U-Joint.

Superb quality reproduction of the original power steering return hose clamps designed for use with various 1958-82 GM models with power steering. Each clamp is cosmetically correct and manufactured to factory specifications...

Power steering pump supply hose fitting for 1977 and older Saginaw pumps requiring an SAE style fitting with the inverted flare. This fitting is necessary to mount the cover to the pump and connects to the supply pressure...

Billet aluminum remote mount power steering reservoirs from Billet Specialties. Features a double O-ring sealed breathable cap and an internal return tube to prevent foaming. Includes the bracket and stainless steel mounting...

Reproduction of the original style power steeing pump fitting for use with various 1960-77 Chrysler, Dodge, Plymouth, and GM models as listed. Many Saginaw power steering pumps with a female style fitting require an adapter...

Unisteer Type II power steering pump for remote reservoir. Saginaw style.