Product#: UK915

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long

This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...

Product#: FT6008C

1966-67 Charger, Coronet, Satellite, Belvedere, GTX; Fuel Tank; Stainless Steel; 19 Gallon Capacity

Correct reproduction of the original fuel tank designed for with 1966-67 Charger, Coronet, Satellite, Belvedere, GTX models. This reproduction fuel tank is manufactured in stainless steel replicating the original GM tank...

Product#: MF297

1970-75 Dodge, Plymouth A, B, E Body; Fuel Tank Filler Neck Grommet

Reproduction fuel tank to filler neck rubber grommet to replace the old or worn out original. Replace brittle or deteriorated fuel tank filler neck grommets with this quality reproduction grommet to eliminate vapor or fuel...

Product#: FT6011B

1968-1970 Coronet, Belvedere, GTX, Road Runner; Ni-Terne Fuel Tank; without EEC; 2 Front Vent Tubes; 19 Gallon Capacity; Except Charger Models

Reproduction of the original fuel tank designed for use with 1968-70 Dodge and Plymouth Coronet, Belvedere, GTX, Road Runner, and Satellite models. This is a 19-gallon fuel tank with two vent pipes on the front of the tank....

Product#: AL124

Accelerator Throttle Rod; Universal Fit

Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...

Product#: MM8271

1960-1976 Chrysler, Dodge, Plymouth; Fuel Tank Mounting Studs ; Pair; OER

Reproduction of the original style fuel tank mounting studs designed for use on various 1960-1976 Mopar models. Fuel tank mounting studs, also known as J-bolts, are required when replacing your fuel tank straps. Manufactured...

Product#: FT6008A

1966-67 Charger, Coronet, Belvedere, GTX; Zinc Coated Fuel Tank; 19 Gallon Capacity

Correct reproduction of the original fuel tank designed for with 1966-67 Dodge Charger, Coronet, and Plymouth Belvedere, and GTX models. This reproduction fuel tank is manufactured in stamped steel featuring a Zinc coating...

Product#: FT6013B

1971-72 Charger, Coronet, GTX, Road Runner; Niterne Coated Fuel Tank; 4 Side Vent Tubes; 19 Gallon

Reproduction of the original fuel tank designed for use with 1971-72 Dodge and Plymouth Charger, Coronet, Road Runner, and Satellite models. This is a 19-gallon fuel tank with four vent pipes on the side of the tank. This...

Product#: FT6011A

1968-1970 Coronet, GTX, Road Runner, Belvedere; Zinc Coated Fuel Tank; 2 Front Vent Tubes; 19 Gallon Capacity

Correct reproduction of the original fuel tank designed for with 1968-70 Dodge Coronet, and Plymouth Belvedere, GTX, Road Runner, and Satellite models. This reproduction fuel tank is manufactured in stamped steel featuring a...

Product#: FT6012A

1970 Coronet, Super Bee, Belvedere, GTX, Road Runner, Satellite, Superbird; Fuel Tank; Zinc Coated; 4 Side Vent Tubes; 19 Gallon Capacity; Except Charger Models

Correct reproduction of the original fuel tank designed for with 1970 Dodge Coronet, Super Bee, Plymouth Belvedere, GTX, Road Runner, and Satellite models. This reproduction fuel tank is manufactured in stamped steel...

Product#: MF290

1962-76 Dodge, Plymouth; Fuel Sending Unit Ground Strap; 3-3/4" Steel

Reproduction of the original fuel tank sending unit ground strap designed for use with most 1962-76 Dodge and Plymouth A-body, B-body and E-body models. Attaches near the short fuel hose that joins the fuel tank sender line...

Product#: MF363

1967-68 Barracuda, Charger, GTX; Quick-Fill Fuel Cap

Reproduction "Quick-Fill", also known as the "Flip Top" fuel cap for 1967-68 Plymouth Barracuda, 1967 GTX and 1968 Charger models. Manufactured using factory specifications with great attention to detail, this replacement...

Product#: C67808

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps

Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...

Product#: MF436

1968-70 Charger, Coronet, GTX, Road Runner, Belvedere; Fuel Tank Sending Unit; 5/16" Outlet

After years of use, your fuel sending unit can wear out or stop working. When that happens, it can cause significant issues for the fuel gauge. Ensure that you always know how much fuel you actually have by replacing your...

Product#: MF438

1971-73 Dodge, Plymouth B-Body; Standard Fuel Tank Sending Unit; with 3/8" Outlet, 1/4" Return Line

After years of use, your fuel sending unit can wear out or stop working. When that happens, it can cause significant issues for the fuel gauge. Ensure that you always know how much fuel you actually have by replacing your...

Product#: MF435

1966-67 Charger, Coronet, Belvedere, Satellite; Fuel Tank Sending Unit; 3/8" Outlet

After years of use, your fuel sending unit can wear out or stop working. When that happens, it can cause significant issues for the fuel gauge. Ensure that you always know how much fuel you actually have by replacing your...

Product#: MF294

1962-76 Dodge, Plymouth A, B, E Body; Fuel Sending Unit Rubber Seal; 2-1/4" ID

Reproduction of the original rubber fuel sending unit seal designed for use with 1962-76 Dodge and Plymouth A, B, and E Body models. Replaces original Mopar part number # 1948757. We suggest replacing this seal every few...

Product#: MF272

1968-70 Dodge, Plymouth B-Body; Fuel Sending Unit; 5/16" Single Outlet; Stainless Steel

Reproduction of the original fuel sending unit designed for use with 1968-70 Dodge and Plymouth B-Body models. After years of use, your fuel sending unit can wear out or stop working entirely. When that happens, it can cause...

Product#: MF445

1968-70 Dodge, Plymouth B-Body; Fuel Sending Unit; 1/2" Outlet, 1/4" Fuel Return; Stainless Steel

Reproduction of the original fuel sending unit designed for use with 1968-1970 Dodge and Plymouth B-Body models. After years of use, your fuel sending unit can wear out or stop working entirely. When that happens, it can...

Product#: MF276

1971-73 Dodge, Plymouth B-Body; Fuel Sending Unit; 3/8" Outlet, 1/4" Return Line; Stainless Steel

Reproduction of the original fuel sending unit designed for use with 1971-73 Dodge and Plymouth B-Body models. After years of use, your fuel sending unit can wear out or stop working entirely. When that happens, it can cause...