Product#: MN2103

Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 40 Piece Set

Reproduction wheel opening molding screws for most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32" diameter phillips washer head design. Complete set will...

Product#: A13026

Molding Screw; Phillips; 8-18 x 3/4"; 31/64" Diameter Washer Head; Phosphate

Product#: *881236

1968 American Motors AMX Rivet Head Bolt with Nut; Set of 25; Black

Grill installation hardware designed to install grill assemblies on various models. These unique carriage bolts are designed with the original appearance of a rivet, but will work like a nut and bolt when installing the grill...

Product#: 353577S

1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips

Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...

Product#: 355785S

1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips; For 3/16 inch Stud; Fits 7/32 inch Hole Diameter; 5-Pack

Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...

Product#: 378362S

1948-up Ford; Emblem Barrel Clips; For 3/32 inch Stud; Fits 1/8 inch Hole Diameter; 5-Pack

Don't attach that beautiful emblem with sloppy fasteners. Secure emblems and nameplates tight with the right Clip. Replaces those old factory clips that have either broken over multiple emblem replacements or have just plain...

Product#: A5196

Barrel Nut, Fits 1/4" Emblem Stud, Fits 9/32" Hole, Spring Steel, Black Phosphate Coated

Replacement barrel nuts used on various GM or Ford vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply...

Product#: 24171

# 8-18 X 3/8 Phillips Head Sealing Screw; # 9 Head; For Wheel Opening Moldings and Window Reveal Molding Clip; With Bi-Wax Tip

Reproduction phillips head screw for attaching the wheel openig moldings and various reveal molding clips to the window channel of the vehicle. Each screw comes with a wax sealant at the tip of the screw to seal the hole from...

Product#: 748707

1971-72 Charger Grill Flat Nut ; Push On Type, Round ; Fits 1/8" Stud Size ; Set of 36

Reproduction of the circlips/lock washer nuts for a 1/8" stud used to attach varios Mopar grills and other items. Each lock washer nut is replicated to exact factory specs. Manufactured to fit and function as original....

Product#: 375480S

1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips; For 1/8 inch Stud; Fits 1/4 inch Hole Diameter; 5-Pack

Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...

Product#: 4492963

Molding Clip Stud Screw; #4 x 3/8" with 1/8" Shoulder; Zinc Plated

Replacement mounting screw for attaching molding clips to the body, Commonly used for: door ledge, window reveal, rocker panel and quarter panel molding retainers. Also used to replace welded stud posts that might be missing....

Product#: A9863

Phillips Head 8-18 x 3/8" Molding Screw; 9/32" Diameter Washer Head; Silver Zinc-Plated

Retaining screws for installation of moldings or other trim that requires a 9/32" diameter round washer head phillips screw. Each zinc treated screw measures 8-18 x 3/8". These screws can also be used on various GM, Ford and...

Product#: *A2754K

1960-72 Chevrolet, GMC Truck; Wire Tail Molding Clip, #10-24, 4" Long, Zinc Plated, 10 Piece Set

Reproduction of the original style wire tail molding clip used on various 1960-72 Chevrolet and GMC trucks. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...

Product#: *B13145K

Wire Tail Molding Clip, #8-32, 3/4" Long, Green Dip Coated, 10 Piece Set

Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...

Product#: *A19807K

Wire Tail Molding Clip, #10-24, 2-1/2" Long, Green Dip Coated, 10 Piece Set

Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...

Product#: *A2789K

Wire Tail Molding Clip, #10-24 With Sliding Stud, 1-5/8" Long, Zinc Chromate, 10 Piece Set

Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...

Product#: *A19626K

Wire Tail Molding Clip, #10-24, 1" Long, Zinc Chromate (Gold Iridescent), 10 Piece Set

Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...

Product#: *A19378K

Metal Universal Break Off Style Molding Clip, #10-24 Thread, 2.5" Wide, Zinc Plated, 10 Piece Set

Replacement break off style molding clips used on various vehicles. These clips are designed to be trimmed the width of the molding, features pre-scribed break off/cut off grooves. #10-24 nuts sold separately. Each clip has a...

Product#: *A8386K

Nylon Tail Push In Molding Clip, 1-3/8" Long, White Nylon, 10 Piece Set

Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...

Product#: *A8843K

Nylon Tail Push In Molding Clip, 3/4" Long, White Nylon, 10 Piece Set

Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...