Product#: MA2410

1967-74 Mopar A-Body W/318 V8 Single Exhaust System - Larger Diameter

These extremely high-quality aluminized replacement exhaust systems are just the ticket to finish off a perfect restoration. These highly detailed systems feature all factory correct bends and their durable construction...


Product#: MD4529

1966-71 Hemi Exhaust Manifolds Without Heat Riser

Replacement exhaust manifold for all 1966-71 Hemi models. Features correct casting numbers, choke control system, and the correct textured finish. Heat riser set not included. Made in the USA.


Product#: MA2398

1967-73 Mopar A-Body Slant 6 High Performance 111" Wheelbase Exhaust System

These extremely high-quality aluminized replacement exhaust systems are just the ticket to finish off a perfect restoration. These highly detailed systems feature all factory correct bends and their durable construction...


Product#: MA2397

1967-73 Mopar A-Body Slant 6 High Performance 108" Wheelbase Exhaust System

These extremely high-quality aluminized replacement exhaust systems are just the ticket to finish off a perfect restoration. These highly detailed systems feature all factory correct bends and their durable construction...


Product#: MA2395

1967-73 Mopar A-Body Slant 6 108" Wheelbase Exhaust System

These extremely high-quality aluminized replacement exhaust systems are just the ticket to finish off a perfect restoration. These highly detailed systems feature all factory correct bends and their durable construction...


Product#: MA2492

1967-73 Mopar A-Body 2-1/2" Crossmember Back System With Violator Pro Mufflers

Pypes Exhaust Systems are designed to deliver enhanced performance, provide extra punch in the passing lane and improve gas mileage. Fabricated using the highest quality materials, 16 gauge, mandrel-bent, stainless steel pipe...


Product#: F15935

Flowmaster; Universal; 2-1/4" U-Fit Aluminized Dual Exhaust Pipe Set

This set comes with all the pipes you need to build a custom dual exhaust system. Set includes: Front Pipes Mid Pipes Rear Pipes Side Exit Pipes Corner Exit Pipes Over-Axle Pipes H-Pipe Stubs Straight Crossover Pipe Bent...


Product#: F15937

Flowmaster; Universal; 3" U-Fit Aluminized Dual Exhaust Pipe Set

This set comes with all the pipes you need to build a custom dual exhaust system. Set includes: Front Pipes Mid Pipes Rear Pipes Side Exit Pipes Corner Exit Pipes Over-Axle Pipes H-Pipe Stubs Straight Crossover Pipe Bent...


Product#: 25053

Doug"s 2-1/2" Stainless Steel Electric Exhaust Cutouts (Pair)

Doug's cut-outs feature a rugged 12 volt DC motor and rotating gate for a leakproof seal every time the cut-out is opened and closed. When fully opened, it does not create exhaust flow obstruction that can create a leaky...


2.50 Inch QTP Screamer Twintronic Muffler 13.5" Case
NEW

Product#: 13250C

2.50 Inch QTP Screamer Twintronic Muffler 13.5" Case

With the success of our Electric Cut Out we took it to the next level, The Screamer. A dual mode muffler with a single inlet with a dual outlet. One outlet is a straight pipe with our electric valve at the end on a 360 degree...


3.00 Inch QTP Screamer Twintronic Muffler 10" Short Case
NEW

Product#: 13302C

3.00 Inch QTP Screamer Twintronic Muffler 10" Short Case

With the success of our Electric Cut Out we took it to the next level, The Screamer. A dual mode muffler with a single inlet with a dual outlet. One outlet is a straight pipe with a valve at the end on a 360 degree floating...


2.50 Inch QTP Screamer Twintronic Muffler 10" Short Case











"<h3><b>2.50 Inch QTP Screamer Twintronic Muffler 10"" Case</b></h3>
NEW

Product#: 13252C

2.50 Inch QTP Screamer Twintronic Muffler 10" Short Case "

2.50 Inch QTP Screamer Twintronic Muffler 10"" Case

With the success of our Electric Cut Out we took it to the next level, The Screamer. A dual mode muffler with a single inlet with a dual outlet. One outlet is a straight pipe with a valve at the end on a 360 degree floating...


2.50 Inch QTP Reverse Internals Screamer Twintronic Muffler 10" Short Case
NEW

Product#: 13253C

2.50 Inch QTP Reverse Internals Screamer Twintronic Muffler 10" Short Case

With the success of our Electric Cut Out we took it to the next level, The Screamer. A dual mode muffler with a single inlet with a dual outlet. One outlet is a straight pipe with a valve at the end on a 360 degree floating...


Product#: P1094

Pypes Performance X-Change 3" Crossover X-Pipe; Polished 304 Stainless Steel

X-Change X-Pipes allow you to open and close your exhaust with the bolting or unbolting of dump plates. By exiting before the mufflers, you will make even more power! Because V8's fire unevenly, exhaust exits in pulses rather...


Product#: 25055

Doug"s 3" Stainless Steel Electric Exhaust Cutout (Each)

Doug's cut-outs feature a rugged 12 volt DC motor and rotating gate for a leakproof seal every time the cut-out is opened and closed. When fully opened, it does not create exhaust flow obstruction that can create a leaky...


Product#: 25052

Doug"s 2-1/2" Stainless Steel Electric Exhaust Cutout

Doug's cut-outs feature a rugged 12 volt DC motor and rotating gate for a leakproof seal every time the cut-out is opened and closed. When fully opened, it does not create exhaust flow obstruction that can create a leaky...


Product#: MA2425

1967-69 Mopar A-Body 383/440 2-1/4" Headpipe LH

OEM style aluminized head pipes which are superior to the coated style originals. Long-lasting and effective against salt-road winters. Will bolt up to the factory exhaust manifolds without any modifications. Sold...


Product#: MA2426

1967-69 Mopar A-Body 383/440 2-1/4" Headpipe RH

OEM style aluminized head pipes which are superior to the coated style originals. Long-lasting and effective against salt-road winters. Will bolt up to the factory exhaust manifolds without any modifications. Sold...


Product#: MA2422

1968-74 Mopar A-Body W/340/360 Headpipe LH 2-1/4" AT Rear, 111" wheelbase

OEM style aluminized headpipes which are superior to the coated style originals. Long lasting and effective against salt-road winters. Each headpipe features factory correct bends and will bolt up to the factory exhaust...


Product#: MA2431

1967-71 Mopar A-Body 6 Cylinder 2-1/4" Headpipe 1 Piece

OEM style aluminized head pipes which are superior to the coated style originals. Long-lasting and effective against salt-road winters. Will bolt up to the factory exhaust manifolds without any modifications. Sold...