Product#: T70781

Delco Energizer R59 Battery Topper Top Post

Now you can turn any modern style battery into a vintage looking one by adding this battery topper featuring the correct special grain just as original. Battery toppers are designed to be used with any maintenance free flat...

Product#: X600750

BOLT, 5/16-18 X 1-1/4" Pointed Tip With Hex Washer Head, Black Phosphate

OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10...

Product#: MH109

1967-71 Mopar B-Body, 1970-71 E-Body Sparton Style Horn Assemblies - Pair High and Low Horn

Correct OER® reproduction of the Sparton horns designed for various 1967-71 Mopar models. Each horn is designed with the Dodge and Plymouth "folded horn" design for proper sound and correct pitch. Manufactured to factory...

Product#: MB2534

1969-70 Dodge, Plymouth B-Body; Positive Battery Cable - Big Block; with 1-Piece Molded Starter Lug

Reproduction battery cables for 1969-70 Dodge and Plymouth big block models with 1-piece molded starter lug. Cables feature correct lead length and markings. The positive cable assemblies are manufactured like the original...

Product#: MB2000B

1965-74 AMC, Dodge, Plymouth; Gauge Cluster Voltage Limiter; Various Applications

This replacement voltage limiter is designed to provide a 5-volt supply and circuit protection up to 18-volts. This limiter will work with reproduction gauges, as well as factory gauges, and it?s required when using...

Product#: 2444442

1966-74 Chrysler, Dodge, Plymouth; Starter Relay

Quality replacement starter relay designed for use on all 1966-74 Chrysler, Dodge and Plymouth models. This starter relay mounts on the inner fenderwell near the battery. Will fit and install on all 1966-74 Chrysler, Dodge,...

Product#: MD2462

1966-73 Chrysler, Dodge, Plymouth; Battery Hold Down Set; Various Models

Repproduction of the original battery mounting hold down set designed for use on various 1966-69 Dodge and Plymouth models. Replace your damaged or missing battery tray hold down components with this quality reproduction....

Product#: T70782

Delco Energizer R89 Side Post Battery Topper

Now you can turn any modern style battery into a vintage looking one by adding this battery topper featuring correct special grain just as original. Battery toppers are designed to be used with any maintenance free flat top...

Product#: 21025

OER Smart Charger 1250; Smart Battery Charger And Maintainer; 6V/12V; 1.25 Amp

The OER Smart Charger 1250 battery charger and maintainer for classic cars and trucks provides high frequency automatic intelligent charging for 6V or 12V lead-acid, flooded, or sealed maintenance-free (AGM and Gell Cell)...

Product#: 2444453

1966-69 Dodge, Plymouth A, B, E Body; Starter Relay; with Manual Transmission

Reprpduction of the starter relay for use with all 1966-69 Dodge and plymouth models with a manual transmission. This starter relay will replace the old, or worn out original adding years of reliable service. Mounts on the...

Product#: CA4857

Cloth Wiring Harness Tape; 1" x 100 foot

If you want an OEM quality and appearance for your original or reproduction wiring, this specially manufactured black! This adhesive back tape will allow you to re-wrap your existing harness or replace tape which may have...

Product#: MD6417

1968-74 Chrysler, Dodge, Plymouth B Body; Neutral Safety Switch Pig Tail; Repair Harness; 3 Prong Connector

Reproduction neutral safety switch harness and socket used to replace the old or damaged harness and connector on various 1968-2002 AMC, Chrysler, Dodge, and Plymouth models. This replacement wiring includes the socket and...

Product#: 10626

Top Post Battery Cable Terminal

Due to the corrosive nature of battery electrolyte, the original lead cast positive and negative terminal ends usually require replacement every few years. We offer these replacement OEM type terminals for use on top post...

Product#: A17690

1956-96 AMC, Chrysler, GM, Ford; Wiring Connector; 2-Terminal; Female; Various Applications

Reproduction 2-terminal wiring connector with pigtail to fit a wide variety of AMC and GM applications. This connector is used on relays, AC clutch cycle switches, AC compressor, back-up lamp switches, HVAC components,...

Product#: 2534814

Dodge, Plymouth A, B, E Body; Battery Hold Down J-Bolt; 7"

Reproduction battery hold down J bolt for various Dodge and Plymouth models. Each bolt is a reproduction of the original style battery hold down bolt. This is a 7" bolt. Refer to part number # 2074089 for 8.5" bolt.

Product#: 14097278

Starter Bolt 3/8"-16 X 4-11/16"

Replacement starter bolt for models that require a 3/8"-16 x 4-11/16" bolt.

Product#: 2074089

1967-74 Dodge, Plymouth A, B, E; Battery Hold Down J-Bolt; 8.5"

Exact reproduction of the original battery hold down J bolt designed for use with 1967-74 Dodge and Plymouth A, B, and E body models as listed. Measures 8.5". Refer to part number # 2534814 for 7" bolt.

Product#: MB2445

1969 Dodge, Plymouth B-Body; Under Dash Wire Harness; with Oil Gauge Provision

Reproduction of the original complete under-dash harness for use with 1969 Dodge and Plymouth B-body models. Each harness features correct color wires, factory style connectors, and is wrapped in non-adhesive black vinyl wrap...

Product#: MH108

1968-74 Mopar Sparton Style Horn Assemblies - High And Low Set - Various Models - See Applications

Correct OER® reproduction of the Sparton horns designed for various 1968-74 Mopar models. Each horn is designed with the Dodge and Plymouth "folded horn" design for proper sound and correct pitch. Manufactured to factory...

Product#: 2857241

1967-71 Dodge, Plymouth; Turn Signal Switch; w/o Tilt ; 7 Wire Switch; A, B, E-Body; 1st Design

Reproduction turn signal switch for 1967-71 Mopar A, B & E-Body models without tilt steering wheel. This switch is manufactured to exact factory specifications and comes with metal connectors attached to the ends of the wires...