Product#: MD48903

1960-76 Mopar A / B / E-Body QA1 Stocker Star Double Adjustable Rear Shock

The double adjustable QA1 Stocker Star shock offers two knobs to adjust compression and rebound separately, resulting in 324 valving options for fine-tuning a suspension to accommodate any type of driving Sold individually....

Product#: 22169856

1962-76 Mopar - Ridetech Hq Handling Quality Shock Absorber - Front

HQ Series shocks offer 20 settings of rebound adjustment for drivers to tune ride quality and handling quality to their specific taste. Switch between cruising in comfort or stiffen your suspension for spirited driving. Sold...

Product#: MD48902

1960-76 Mopar A / B / E-Body QA1 Stocker Star Single Adjustable Rear Shock

The single adjustable QA1 Stocker Star aluminum shock allows to simultaneously change the compression and rebound with one knob, giving 18 valving options. Sold individually. Made in USA Features: Easy, bolt-in installation...

Product#: MD48501

1960-76 Mopar A / B / E-Body QA1 Stocker Star Non-Adjustable Front Shock

This fixed, non-adjustable QA1 Stocker Star aluminum shock is designed for the budget-conscious owner in mind. Sold individually. Made in USA Features: Easy, bolt-in installation on most applications Non-coilover Lightweight...

Product#: 821255

1962-79 Charger, Challenger, Barracuda; Koni Classic Rear Shock Absorbers; Red

Koni Classic rear shock absorbers for 1962-79 Mopar B and E-body models. These dampers are a direct replacement, performance upgrade that will improve ride quality and performance. They are rebound adjustable with vehicle...

Product#: CF42103

1960-76 Mopar A/B/E Bodies - Cf Series 90-10 Front Shock Absorbers (Pair)

Calvert Racing Suspensions offers a shock specifically designed for maximum weight transfer. Built with the softest rate on rebound on the market today, allowing the front end of your race car to come up as easy as possible!...

Product#: TF500175

Coilover Thrust Bearings

Make changing the ride height on your vehicle simple with a set of thrust bearings. Each set does one pair of coil-over shocks.

Product#: HYP20012250B

Hyperco Coil Over Spring; Barrel-Shaped; 200 lb/in; 12" Tall; 2-1/2" Diameter

Hyperco Coil-Over Spring, Barrel Shaped, 200 lb/in, 12" long, 2-1/2" inside diameter

Product#: KG4510

1962-72 Mopar B-Body / 1970-74 E-Body KYB Gas-A-Just Front Shock

KYB's Gas-a-Just shocks are designed to deliver maximum driving control and performance. Gas-a-Just's higher gas pressure keeps tires glued to the road while it's high strength, monotube configuration provides extra-rugged...

Product#: HYP35012250

Hyperco Coil Over Spring; 350 lb/in; 12" Tall; 2-1/2" Diameter

Hyperco Coil-Over Spring, 350 lb/in, 12" long, 2-1/2" inside diameter

Product#: AR20135DC

AFCO Aluminum Coil-Over Flat Cone Spring mount; Clear

This kit is used to mount a 2 1/2" or 2 5/8" coil-over spring on any AFCO big body threaded aluminum shock. Includes flat spring seat, clip to secure seat to shaft end and threaded adjuster nut for the spring seat on the...

Product#: MN38100

1964-74 Chrysler, Dodge, Plymouth; Upper Shock Absorber Bushings; Pair

Reproduction of the original upper shock absorber bushings designed for use with 1964-74 Chrysler, Dodge and Plymouth models as listed. Each bushing is manufactured in quality EPDM rubber to correct factory dimensions...

Product#: AR20131APRO

AFCO Aluminum Coil-Over Flat Cone Spring mount; Black

AFCO replacement nut for Coil-Over kit.

Product#: MP500403

1962-74 Mopar A/B/E-Bodies - Rear Lower Shock Washer and Nut Set; 6 Pieces

Reproduction rear lower shock washer and nut set for 1962-74 A/B/E models. Washers have the correct concave shape and include the flat dimple around the edge. 6 piece set. {specs} {fitment}

Product#: GB82090

1960-76 Dart, Challenger, Charger; Gabriel Classic Shock Absorber; Front

Classic or collectable car owners can now have modern ride technology with the Gabriel Classic shock. Gas charged designs resist compression and improve rebound to keep your tires in contact with the road, while also reducing...

Product#: MN3110

1962-74 B/E-Body Rear Shock Washers & Nuts Set

Reproduction rear shock washers and nuts set for 1962-74 B/E-Body models. Every set includes 2 nuts, 2 outer washers, and 2 inner washers. {specs} {fitment}

Product#: 2206925

1962-76 Mopar; Upper Shock Bushing Retainer Set

Excellent reproductions of the upper shock absorber bushing retaining washers used on 1962-76 Chrysler, Dodge, and Plymouth vehicles. Stamped from the correct guage steel with all of the details of an original part and...

Product#: MPN006

1968-69 Dodge, Plymouth B-Body; Lower Shock Mount Nuts & Bolts

Front shock lower mounting hardware for 1968-69 Mopar models. Comes with all the necessary nuts (2) and bolts (2) to ensure correct fitment. Applications: 1968-1969 Dodge Charger 1968-1969 Dodge Coronet 1968-1969 Dodge Super...

Product#: 31954000

RideTech 1/4" Air Line Fitting

1/4?NPT x 1/4?tube, Used in almost all compressor systems, ARC2000, ARC1500, ARC1600, ARC4000, ARC4000e2, ARC4100e2 Of course our kits come with all the fittings you need, but if you find yourself building your own system, or...

Product#: A3499

5/16"-24 "Keps" Lock Washer & Nut; Zinc Plated

This 5/16"-24 "Keps" lock washer and nut is zinc plated steel and is sold as each. Product Specifications:Keps lock washer and nut Zinc plated steel Thread size: 5/16"-24 Hex width: 1/2"