Product#: ME1535

1970 Dodge Challenger; Tail Lamp Bezel Set ; 3 Piece Set

Reproduction of the original tail lamp bezels designed for use on 1970 Dodge Challenger models. Each bezel is manufactured in die-cast metal, chromed plated and painted to the correct specifications. Each set includes the...


Product#: ME1856

1971 Dodge Challenger; Headlamp Bezels ; Argent Silver; RH and LH; Pair

Reproduction of the original headlamp bezels for 1971 Dodge Challenger standard models. Attention to detail is important in any restoration and cutting corners by reusing old bezels can ruin the look of an otherwise nice...


Product#: ME1545

1970 Dodge Challenger R/T; Headlamp Bezels; Black; Pair

Attention to detail is important in any restoration, and cutting corners by reusing old headlight bezels can ruin the look of an otherwise nice restoration. Manufactured in stamped aluminum with a black center fill to OE...


Product#: ME1518

1970-71 Dodge Challenger; Side Marker Lamp Set; Front and Rear; 4 Piece Set

Reproduction of the original type side marker lamps dersigned for use with 1970-71 Dodge Challenger models. This factory-style replacement side marker and bezel set includes the lenses, bezels, and pigtails where required to...


Product#: ME1517

1970-71 Challenger; Side Marker Bezel Set ; Front and Rear; 4 Piece Set

Reproduction of the original side marker bezels designed for use on 1970-71 Dodge Challenger models. Designed and manufactured to replicate the original in quality and appearance. Feature correct chrome finish along with...


Product#: ME8145

1970 Charger, 1970-74 Challenger; Park Lamp Assembly; Passenger Side

This factory style reproduction of the original park lamp assembly is designed for use with 1970 Dodge Charger, and 1970-74 Challenger models. Each park lamp assembly is manufactured to factory specifications featuring the...


Product#: *MD9501

1971-74 Mopar Headlamp Bucket Set Inner and Outer LH and RH Sides - Set of Four

OER reproduction of the 1971-74 Mopar B, C-Body headlamp bucket set for models with 4-headlamp system. Manufactured in stamped steel just like the factory Mopar item, each bucket in the set features the correct markings on...


Product#: *MD9502

1964-76 Mopar 3-Tab Headlamp Trim Ring Set - Set of Four

OER reproduction of the 1964-76 Mopar B, C, E-Body 3-Tab headlamp retaining ring, also known as ring and lug for sealed beam unit. Manufactured in stainless steel just like the factory Mopar item. Sold individually. 1 set...


Product#: 2449525

1964-76 Chrysler/Dodge/Plymouth; Headlamp Retaining Ring; B, E and C-Body; 5-3/4"; 3-Tab

Reproduction of the 1964-76 Mopar B, C, E-Body 3-Tab style headlamp retaining ring, also known as ring and lug for sealed beam unit. Manufactured in stainless steel just like the factory Mopar item. Fits various models that...


Product#: H5001

Headlamp Sealed Beam; 12 Volt; High Beam; 5-3/4" Round; Halogen

Replacement sealed beam halogen headlamp for your burned out original. This halogen bulb is just what you need to keep your headlamps operational and up to date with modern day lighting.


Universal Under Hood Lamp Assembly; with Bulb and Wiring
NEW

Product#: 748863

Universal Under Hood Lamp Assembly; with Bulb and Wiring

Reproduction under hood lamp assembly for a wide variety of 1958-71 GM models. Manufactured to exact specifications including a in-line fuse, correct color wiring and terminal end. This is a popular replacement under hood...


Product#: MN1776

1968-71 Dodge, Plymouth A, B, E-Body; Headlamp Adjustor Hardware Set with 4 Lamp System

Reproduction of the original style headlight adjuster screw assembly used for headlamp beam adjustment on various Mopar models from 1968-1971. This nut and screw assembly mounts directly to the headlamp housing and enables...


Product#: 3587440

1972-76 Dodge, Plymouth; Rear Side Marker Lamp Lens; Red; A / B / E-Body

Reproduction of the original rear side marker lamp lens designed for use on 1972-76 A-body, 1972-75 B-body and 1972-74 E-body Mopar models. This lens will fit and install same as original. For use on the rear quarter panel....


Product#: 2786885

1968-70 Mopar B, C-Body Headlamp Bucket - Marked HI-LO5-LT.-889 Outer LH Side

OER reproduction of the 1968-70 Mopar B, C-Body headlamp bucket. Manufactured in stamped steel just like the factory Mopar item, each bucket features the correct HI-LO5-LT.-889 markings on the front rim. One bucket required...


Product#: 3443125

1971-74 Mopar B, C and E-Body Headlamp Bucket - Marked HI-LO5-LT.-123 Outer LH Side

OER reproduction of the 1971-74 Mopar B, C, E-Body headlamp bucket. Manufactured in stamped steel just like the factory Mopar item, each bucket features the correct HI-LO5-LT.-123 markings on the front rim. One bucket...


Product#: 3443120

1971-74 Mopar B, C and E-Body Headlamp Bucket - Marked HI-5-RT.-118 Inner RH Side

OER reproduction of the 1971-74 Mopar B, C, E-Body headlamp bucket. Manufactured in stamped steel just like the factory Mopar item, each bucket features the correct HI-5-RT.-118 markings on the front rim. One bucket required...


Product#: 546912

H4 Xenon 130/90 Watt High Performance Headlamp Bulbs - Pair

Upgrade your lighting to Hyper White Xenon Bulbs and enjoy a light that simulates daylight and reduces glare, fatigue and eye strain. These super bright 130/90 watt replacement bulbs light up the night to increase driving...


Product#: 545812X

H4 Xenon 100/80 Watt Replacement Headlamp Bulbs - Pair

Upgrade your lighting to Hyper White Xenon Bulbs and enjoy a light that simulates daylight and reduces glare, fatigue and eye strain. These super bright 100/80 watt replacement bulbs light up the night to increase driving...


Product#: 4000

Headlamp Sealed Beam; 12 Volt; Low Beam; 5-3/4" Round; Tungsten

This replacement sealed beam headlamp bulb is perfect for maintaining the factory appearance and performance when the original burns out.


Product#: 6027292

Headlight Bucket Tension Spring - Various Models

Plated tension spring for headlight bucket to fit a wide variety of vehicle applications including GM and Mopar models. Closed back design is produced to allow the spring to be installed with a single phillips head screw...