Product#: 14927

Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each

Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...

Product#: W1006

1964-2000 GM; Front Coil Spring to Frame Rubber Insulator; 1/4" Thick; LH or RH; Various Models; Each

Reproduction molded rubber front coil spring insulator that mounts between the coil spring and the frame on various 1949-96 vehicles. This insulator keeps the spring from riding metal-to-metal on the frame. Coil spring...

Product#: *MD7793

1970-72 Dodge, Plymouth B-Body; 1970-74 E-Body; Front End Rebuild Kit

Reproduction of the original front end components designed for use with 1970-72 Dodge and Plymouth B-Body models. Restore the handling of your classic and reduce front tire wear with this rebuild set. The set will renew your...

Product#: MM3067

1962-74 Dodge, Plymouth B / E-Body; Disc Brake Conversion Spindle Set; Stock Height

Disc Brake conversion spindle set for 1962-74 Mopar B & E-Body models as listed. Designed in the style of a 1973 & up Mopar disc brake spindle, but developed to fit 1962-74 Dodge, Plymouth B and E Body model drum brake...

Product#: 154891

1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair

Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...

Product#: A15589

Hex Nut 7/16-14

Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell...

Product#: MM3068

1962-74 Dodge, Plymouth B / E-Body; Spindle Set; Stock Height; With Disc Brake Brackets

Disc Brake conversion spindle set with caliper brackets for 1962-74 Dodge or Plymouth B & E-Body. Designed in the style of a 1973 & up Mopar disc brake spindle, but developed to fit 1962-74 Mopar B/E Body model drum brake...

Product#: ME1617

1962-74 Dodge, Plymouth B & E-Body; Upper Control Arm; Service Replacement; Passenger Side

Service replacement upper control arm for various 1962-72 Dodge and Plymouth B-Body, and 1970-74 E-Body models. Each aftermarket upper control arm assembly comes fully loaded, and is manufactured to replace the original...

Product#: ME1618

1962-74 Dodge, Plymouth B & E-Body; Upper Control Arm; Service Replacement; LH Driver Side

Service replacement upper control arm for various 1962-72 Dodge and Plymouth B-Body, and 1970-74 E-Body models. Each aftermarket upper control arm assembly comes fully loaded, and is manufactured to replace the original...

Product#: MD2593

1962-74 Mopar B / E-Body; Shock Tower Brace; Drivers Side

This reproduction shock tower brace is designed for use with 1962-74 Dodge and Plymouth B and E body models. Each shock tower breace is manufactured in stamped steel to original factory specifications featuring correct...

Product#: K791A

1960-76 Dodge, Plymouth A / B / E-Body; Lower Control Arm Bushing

If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...

Product#: FSB904

1974-78 Mustang II 3/4" Front Sway Bar; Measures 43-1/4" Wide; For Standard Crossmember

Replacement 3/4" sway bar kit for hot rods and custom trucks running standard width crossmember Mustang II front suspension. Designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved...

Product#: K772A

1957-89 Dodge, Plymouth A, B & E-Body; Upper Control Arm Ball Joint; OER

Reproduction of the original style upper control arm ball joint designed for use with 1962-74 Dodge and Plymouth B, and E-body models and select early and late A-body Models. These vital suspension components are commonly...

Product#: MD2594

1962-74 Mopar B / E-Body; Shock Tower Brace; Passenger Side; EDP Coated

This reproduction shock tower brace is designed for use with 1962-74 Dodge and Plymouth B and E body models. Each shock tower breace is manufactured in stamped steel to original factory specifications featuring correct...

Product#: K783A

1962-76 Dodge/Plymouth; Ball Joint; With Steering Arm; For Lower Control Arm; LH

Reproduction lower ball joint, with steering arm, for the lower control arm on a wide variety of Dodge and Plymouth models. If your suspension rattles or makes noises when turning or going over bumps, it might be time to...

Product#: MK781A

1962-76 Dodge/Plymouth; Ball Joint; With Steering Arm; For Lower Control Arm; RH

Reproduction lower ball joint, with steering arm, for the lower control arm on a wide variety of Dodge and Plymouth models. If your suspension rattles or makes noises when turning or going over bumps, it might be time to...

Product#: MK408B

1960-76 Dodge/Plymouth A / B / E-Body; Control Arm Bushing Set; Upper; 4-Piece; Premium Quality

Premium quality reproduction of the original upper control arm bushings designed for use with 1960-76 Dodge and Plymouth A, B, and E body models. Each bushing is manufactured to correct factory specifications replicatin the...

Product#: 154632

Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion

Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...

Product#: 154633

1964-70 Mustang, 1967-70 Cougar; Frame Rail Chassis Boxing Plates; Weld-In; For Mustang II IFS Front Suspension Conversion

Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...

Product#: K7016A

1966-74 Dodge/Plymouth; B/E-Body; Strut Rod Rubber Bushing Kit; Standard Design

Standard design strut rod bushing kit for 1966-74 Mopar B-body and C-body vehicles. These OE-style rubber bushings are factory replacement for models manufactured up to 10/19/73. They will meet or exceed the factory ride and...