Product#: MM3068

1962-74 Dodge, Plymouth B / E-Body; Spindle Set; Stock Height; With Disc Brake Brackets

Disc Brake conversion spindle set with caliper brackets for 1962-74 Dodge or Plymouth B & E-Body. Designed in the style of a 1973 & up Mopar disc brake spindle, but developed to fit 1962-74 Mopar B/E Body model drum brake...


Product#: MD2594

1962-74 Mopar B / E-Body; Shock Tower Brace; Passenger Side; EDP Coated

This reproduction shock tower brace is designed for use with 1962-74 Dodge and Plymouth B and E body models. Each shock tower breace is manufactured in stamped steel to original factory specifications featuring correct...


Universal Top Spring Hat Set; Weld-In Mustang II Suspension Upgrade
NEW

Product#: 154632

Universal Top Spring Hat Set; Weld-In Mustang II Suspension Upgrade

Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...


Product#: 14927

Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each

Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...


Product#: MM1907

1970-74 Challenger, Barracuda, Cuda; Control Arm Reinforcement Bracket; LH

Reproduction of the original upper control arm reinforcement bracket for use with 1970-74 Dodge and Plymouth E body models. The control arm reinforcement attaches from the upper control arm bracket to the fender shield. Comes...


Product#: MM1908

1970-74 Challenger, Barracuda, Cuda; Control Arm Reinforcement Bracket; RH

Reproduction of the original upper control arm reinforcement bracket for use with 1970-74 Dodge and Plymouth E body models. The control arm reinforcement attaches from the upper control arm bracket to the fender shield. Comes...


Product#: K772A

1957-89 Dodge, Plymouth A, B & E-Body; Upper Control Arm Ball Joint; OER

Reproduction of the original style upper control arm ball joint designed for use with 1962-74 Dodge and Plymouth B, and E-body models and select early and late A-body Models. These vital suspension components are commonly...


Product#: ME5057

1970-74 Challenger, Barracuda, Cuda; Front Leaf Spring Hanger Gusset; RH Passenger Side

Reproduction of the original type leaf spring hanger gusset designed for use with 1970-74 Dodge and Plymouth E- Body models. This metal reinforcement is welded in place between the rear frame rail and the rocker panel just...


Product#: MM8308

1970-74 Challenger, Barracuda, Cuda; Leaf Spring Front Mount Perch Bracket Reinforcement; RH Pasenger Side

Reproduction of the original leaf spring front mount perch bracket reinforcement for use with 1970-74 E body models. Each bracket is manufactured in stamped steel to original factory specifications featuring correct contours...


Product#: MM3067

1962-74 Dodge, Plymouth B / E-Body; Disc Brake Conversion Spindle Set; Stock Height

Disc Brake conversion spindle set for 1962-74 Mopar B & E-Body models as listed. Designed in the style of a 1973 & up Mopar disc brake spindle, but developed to fit 1962-74 Dodge, Plymouth B and E Body model drum brake...


Product#: 154891

1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair

Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...


Product#: MD2593

1962-74 Mopar B / E-Body; Shock Tower Brace; Drivers Side

This reproduction shock tower brace is designed for use with 1962-74 Dodge and Plymouth B and E body models. Each shock tower breace is manufactured in stamped steel to original factory specifications featuring correct...


Product#: ME1617

1962-74 Dodge, Plymouth B & E-Body; Upper Control Arm; Service Replacement; Passenger Side

Service replacement upper control arm for various 1962-72 Dodge and Plymouth B-Body, and 1970-74 E-Body models. Each aftermarket upper control arm assembly comes fully loaded, and is manufactured to replace the original...


Product#: ME1618

1962-74 Dodge, Plymouth B & E-Body; Upper Control Arm; Service Replacement; LH Driver Side

Service replacement upper control arm for various 1962-72 Dodge and Plymouth B-Body, and 1970-74 E-Body models. Each aftermarket upper control arm assembly comes fully loaded, and is manufactured to replace the original...


Product#: W1006

Front Coil Spring to Frame Rubber Insulator; 1/4" Thick; LH or RH

Reproduction molded rubber front coil spring insulator that mounts between the coil spring and the frame on various 1949-96 vehicles. This insulator keeps the spring from riding metal-to-metal on the frame. Coil spring...


Product#: FSB904

1974-78 Mustang II 3/4" Front Sway Bar; Measures 43-1/4" Wide; For Narrowed Crossmember

Front sway bar kit for hot rods and custom trucks running narrowed corssmember Mustang II front suspension kits. These 3/4" sway bars are designed to minimize body roll, under-steer and over-steer when cornering, resulting in...


Product#: K783A

1962-76 Dodge/Plymouth; Ball Joint; With Steering Arm; For Lower Control Arm; LH

Reproduction lower ball joint, with steering arm, for the lower control arm on a wide variety of Dodge and Plymouth models. If your suspension rattles or makes noises when turning or going over bumps, it might be time to...


Product#: MK781A

1962-76 Dodge/Plymouth; Ball Joint; With Steering Arm; For Lower Control Arm; RH

Reproduction lower ball joint, with steering arm, for the lower control arm on a wide variety of Dodge and Plymouth models. If your suspension rattles or makes noises when turning or going over bumps, it might be time to...


Product#: MK408B

1960-76 Dodge/Plymouth A / B / E-Body; Control Arm Bushing Set; Upper; 4-Piece; Premium Quality

Premium quality reproduction of the original upper control arm bushings designed for use with 1960-76 Dodge and Plymouth A, B, and E body models. Each bushing is manufactured to correct factory specifications replicatin the...


Frame Rail Chassis Boxing Plates; Weld-In; For Mustang II IFS Front Suspension Conversion
NEW

Product#: 154633

Frame Rail Chassis Boxing Plates; Weld-In; For Mustang II IFS Front Suspension Conversion

Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...