Product#: *MD7793

1970-72 Dodge, Plymouth B-Body; 1970-74 E-Body; Front End Rebuild Kit

Reproduction of the original front end components designed for use with 1970-72 Dodge and Plymouth B-Body models. Restore the handling of your classic and reduce front tire wear with this rebuild set. The set will renew your...


Product#: MM3067

1962-74 Dodge, Plymouth B / E-Body; Disc Brake Conversion Spindle Set; Stock Height

Disc Brake conversion spindle set for 1962-74 Mopar B & E-Body models as listed. Designed in the style of a 1973 & up Mopar disc brake spindle, but developed to fit 1962-74 Dodge, Plymouth B and E Body model drum brake...


Product#: 154891

1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair

Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...


Product#: ME1617

1962-74 Dodge, Plymouth B & E-Body; Upper Control Arm; Passenger Side

Reproduction of the original upper control arm for various 1962-72 Dodge and Plymouth B-Body, and 1970-74 E-Body models. Each upper control arm assembly comes fully loaded, and is manufactured to replace the original control...


Product#: ME1618

1962-74 Dodge, Plymouth B & E-Body; Upper Control Arm; Drivers Side

Reproduction of the original upper control arm for various 1962-72 Dodge and Plymouth B-Body, and 1970-74 E-Body models. Each upper control arm assembly comes fully loaded, and is manufactured to replace the original control...


Product#: W1006

Coil Spring Insulator; 5-5/16" O.D.; 3-3/4" I.D.; 1/4" Thick

Reproduction of the original molded rubber coil spring insulator that mounts between the coil spring and the frame. This insulator keeps the spring from riding metal-to-metal on the frame. Coil spring insulators were not...


Product#: FSB904

1974-78 Mustang II 3/4" Front Sway Bar; Measures 43-1/4" Wide; For Narrowed Crossmember:

Front sway bar kit for 1974-78 Ford Mustang II models. These 3/4" sway bars are designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved vehicle handling and control. Offers all of the...


Product#: A15589

Hex Nut 7/16-14

Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell...

Hex Nut 7/16-14

MSRP $0.99 ea
Classic $0.69 ea

Product#: FSB911

Front Sway Bar Bracket; Tab Style; Universal; End Link to Lower Control Arm, LH or RH

These universal front sway bar end link brackets are for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm. This is a universal bracket sold as a service part, it may...


Universal; 28" Yellow Powder Coated; Traction Bars; For Multi-Leaf Springs Only
FEATURED

Product#: LW20475

Universal; 28" Yellow Powder Coated; Traction Bars; For Multi-Leaf Springs Only

Designed to fit most leaf springs, these bars strengthen rear suspension and reduce wheel hop. They are constructed from heavy gauge rectangular steel and feature MIG welded brackets for extra strength. Rubber snubbers,...


Product#: H1110

1966-74 Mopar B / E-Body Hotchkis Tubular Upper Control Arms

Install the geometry corrected Hotchkis Tubular Upper A-Arms and gain vastly increased handling and control. These 100% TIG welded, bolt-on arms offer an improved camber curve and increased caster. Features: TIG welded...


Product#: PM1014

1970-74 Plymouth Cuda E-Body Level 1 Chassis Stiffering Set

The factory engineers added stiffening to some ares of the E-Bodies, so they recognized the benefits of the bracing 40+ years ago. Any car will benefit from the additional chassis (unibody) stiffening, especially if you are...


Product#: *MR3128

1970-74 Mopar E-Body Except Hemi And 440 5 Leaf Performance Rear Leaf Springs

These reproduction leaf spring are designed for an exact, direct replacement of the originals. Includes front bushing already installed. Sold only as a pair. Note: Shipped double oversize. No f urther discounts...


Product#: H4011S

1970-74 Plymouth Barracuda / "Cuda Hotchkis Weld-In Sub-Frame Connectors

One of the most important additions to your high performance classic Mopar is installing sub-frame connectors. Hotchkis Performance sub-frame connectors bridge the gap between the front frame rails and the rear frame rails,...


Product#: H2254R

1970-74 Mopar E-Body Hotchkis 3/4" Adjustable Rear Stabilizer Bar Set

Improve the handling and straight line performance with this Hotchkis Sport Suspension stabilizer bar. Specifically tuned and tested for each application to offer a balanced feel. Hotchkis Sport Suspension stabilizer bars...


Product#: PM1502

1970-74 Mopar E-Body Front & Rear Torque Box 4-Piece Set

1970-74 Mopar E-Body torque boxes are designed to add strength to your Mopar unibody in several critical areas. The factory added OEM torque boxes on the high-HP, high torque cars and convertibles. Hemi cars, six-pak cars...


Product#: C222051

Competition Engineering Rear Coil-Over Shock Kit; Universal Design Allows Installation On A Variety Of Chassis.

Competition Engineering Rear Coil Over Shock Kit, Universal design allows installation on a variety of chassis. Complete kit includes 3 way Adjustable Shocks, Upper Mounts and Adjustable Lower Mounts. 3-Way Adjustable Shocks...


Product#: H2254F

1970-74 Mopar E-Body Hotchkis 1-1/4" Front Stabilizer Bar Set

Improve the handling and straight line performance with this Hotchkis Sport Suspension stabilizer bar. Specifically tuned and tested for each application to offer a balanced feel. Hotchkis Sport Suspension stabilizer bars...


Product#: PM1103

1970-74 Plymouth Cuda Frame Connectors

These frame rail connectors are precision CNC Machine cut and CNC bent to form a 3 sided box. When they are welded to the floorpan of the Mopar Unibody, they create a complete boxed in frame rail section that is stronger than...